All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted.
We reserve the right to change specifications based on technological advances.
SPECIFICATION
GENERAL SPECIFICATIONS
Efficiency
Switching Frequency
Isolation Voltage (Input to Output)
Isolation Capacitance
Leakage Current
Clearance/Creepage
TEST CONDITIONS
Nominal input voltage and full load
1 minute
240VAC, 60Hz
Min
Typ
Max
Unit
270
5000
See Table
300
330
12
17
2
8
Without derating
With derating
Natural convection (20LFM)
5
-40
+77
-55
18
95
MIL-STD-810F
MIL-STD-810F
3,849,000 hours
+77
+105
+125
kHz
VAC
pF
µA
mm
°C
°C
°C/W
% RH
ENVIRONMENTAL SPECIFICATIONS
Operating Ambient Temperature
Storage Temperature Range
Thermal Impedance
Relative Humidity
Thermal Shock
Vibration
MTBF
MIL-HDBK-217F Ta=25°C, full load (G/B, controlled environment)
PHYSICAL SPECIFICATIONS
Weight
Dimensions (L x W x H)
Case Material
Base Material
Potting Material
0.48oz (14g)
1.25x0.80x0.40 inches (31.8x20.3x10.2mm)
Non-conductive black plastic
Non-conductive black plastic
Silicon (UL94-V0)
ANSI/AAMI ES60601-1, IEC60601-1, EN60601-1
Class A, Class B
Air ±8kV
Contact ±6kV
10 V/m
±2kV
±2kV
10 Vrms
Perf. Criteria A
Perf. Criteria A
Perf. Criteria A
Perf. Criteria A
Perf. Criteria A
SAFETY & EMC CHARACTERISTICS
Safety Approvals (pending)
EMI (See Note 2)
ESD
Radiated Immunity
Fast Transient (See Note 3)
Surge (See Note 3)
Conducted Immunity
EN55011, EN55022, and FCC Part 18
EN61000-4-2
EN61000-4-3
EN61000-4-4
EN61000-4-5
EN61000-4-6
NOTES
1. The “x” in the model number represents the Pin Connection type. It can be “A” for pin connection type A or “B” for pin connection type B. See mechanical
drawings on page 4 for more information.
2. The DCMPP10 series meets EMI Class A without an external filter added. This series can only meet EMI Class B with external components added. Please
contact factory for more information.
3. An external input filter capacitor is required if the module has to meet EN61000-4-4, EN61000-4-5.
• For 5VDC nominal input models we recommend connecting an aluminum electrolytic capacitor (Nippon Chemi-con KY series, 1000µF/25V) and a
reverse diode (Vishay V10P45) in parallel.
• For 12VDC & 24VDC nominal input models we recommend connecting an aluminum electrolytic capacitor (Nippon Chemi-con KY series, 470µF/50V) in
parallel.
• For 48VDC nominal input models we recommend connecting an aluminum electrolytic capacitor (Nippon Chemi-con KY series, 330µF/100V) in parallel.
4. Remote On/Off control is optional and is only available for “B” type pin connection models. To order the converter with remote on/off add the suffix
“-P” to the model number (Ex: DCMPP10-48S12B-P).
5. Trim function is optional and is only available for “B” type pin connection models. To order the converter with Trim pin add the suffix “-T” to the model
number (Ex: DCMPP10-48S12B-T).
CAUTION:
This power module is not internally fused. An input line fuse must always be used.
I am a newbie, and I would like to ask you: (1) If Samsung's S3C2440 does not have a VPU, how can I use software decoding to decode H.264? (2) Does dshow in wince5.0 support software decoding of H.264...
IAR and IAR Embedded Workbench, KEIL and Keil MDK-ARM, both are ARM development tools. So, what is the difference between IAR and Keil? KEIL can automatically configure the startup code, integrate Fla...
Chapter 58 UCOSII Experiment 1 - Task Scheduling All of our previous routines are bare metal programs. Starting from this chapter, we will introduce the use of UCOSII (real-time multitasking operating...
Digital VLSI Design Tsinghua University Li Xiangyu : https://training.eeworld.com.cn/course/5445"Digital Large Scale Integrated Circuits" is a basic course for postgraduate students majoring in microe...
I am a beginner in embedded systems and I read a book that said, "There are 1) ways to protect shared data: 2) disable interrupts 3) use semaphores 4) disable task switching" (1) Does disabling interr...
Embedded System
京公网安备 11010802033920号
EEWORLD
