FT24C16A-USR-B datasheet, PDF - EEWORLD Datasheet

Datasheet> All Categories > storage> storage> FT24C16A-USR-B

FT24C16A-USR-B: DescriptionEEPROM, 2KX8, Serial, CMOS, PDSO8, SOP-8; Categorystorage storage; File Size298KB，20 Pages; ManufacturerFremont Micro Devices USA; Environmental Compliance

Download Datasheet Parametric Compare View All

FT24C16A-USR-B Overview

EEPROM, 2KX8, Serial, CMOS, PDSO8, SOP-8

FT24C16A-USR-B Parametric

Parameter Name	Attribute value
Is it lead-free?	Lead free
Is it Rohs certified?	conform to
Maker	Fremont Micro Devices USA
package instruction	SOP,
Reach Compliance Code	unknow
Other features	IT ALSO HAVE FREQUENCY 0.4 MHZ OPERATES AT 1.8V
Maximum clock frequency (fCLK)	1 MHz
JESD-30 code	R-PDSO-G8
length	4.9 mm
memory density	16384 bi
Memory IC Type	EEPROM
memory width	8
Number of functions	1
Number of terminals	8
word count	2048 words
character code	2000
Operating mode	SYNCHRONOUS
Maximum operating temperature	85 °C
Minimum operating temperature	-40 °C
organize	2KX8
Package body material	PLASTIC/EPOXY
encapsulated code	SOP
Package shape	RECTANGULAR
Package form	SMALL OUTLINE
Parallel/Serial	SERIAL
Peak Reflow Temperature (Celsius)	NOT SPECIFIED
Maximum seat height	1.75 mm
Serial bus type	I2C
Maximum supply voltage (Vsup)	5.5 V
Minimum supply voltage (Vsup)	2.5 V
Nominal supply voltage (Vsup)	5 V
surface mount	YES
technology	CMOS
Temperature level	INDUSTRIAL
Terminal form	GULL WING
Terminal pitch	1.27 mm
Terminal location	DUAL
Maximum time at peak reflow temperature	NOT SPECIFIED
width	3.9 mm
Maximum write cycle time (tWC)	5 ms

Preview

Download Datasheet

View All

24C04A, 24C08A, 24C16A

Two-Wire Serial EEPROM

4K, 8K and 16K (8-bit wide)

FEATURES



Low voltage and low power operations:



FT24C04A/08A/16A:

= 1.8V to 5.5V

Maximum Standby current < 1µA (typically 0.02µA and 0.06µA

1.8V and 5.5V respectively).

16 bytes page write mode.

Partial page write operation allowed.

Internally organized: 512



8 (4K), 1024



8 (8K), 2048



8 (16K).

Standard 2-wire bi-directional serial interface.

Schmitt trigger, filtered inputs for noise protection.

Self-timed Write Cycle (5ms maximum).

1 MHz (5V), 400 kHz (1.8V, 2.5V, 2.7V) Compatibility.

Automatic erase before write operation.

Write protect pin for hardware data protection.

High reliability: typically 1, 000,000 cycles endurance.

100 years data retention.

Industrial temperature range (-40

C to 85

C).

Standard 8-pin DIP/SOP/TSSOP/DFN/MSOP and 5-pin SOT-23/TSOT-23 Pb-free packages.



DESCRIPTION

The FT24C04A/08A/16A series are 4096/8192/16384 bits of serial Electrical Erasable and Programmable Read Only

Memory, commonly known as EEPROM. They are organized as 512/1024/2048 words of 8 bits (1 byte) each. The

devices are fabricated with proprietary advanced CMOS process for low power and low voltage applications. These

devices are available in standard 8-lead DIP, 8-lead SOP, 8-lead TSSOP, 8-lead DFN, 8-lead MSOP, and 5-lead SOT-

23/TSOT-23 packages. A standard 2-wire serial interface is used to address all read and write functions. Our

extended V

range (1.8V to 5.5V) devices enables wide spectrum of applications.

PIN CONFIGURATION

Pin Name

A2, A1, A0

SDA

SCL

Pin Function

Device Address Inputs

Serial Data Input / Open Drain Output

Serial Clock Input

Write Protect

No-Connect

DS3001M-page1

24C04A, 24C08A, 24C16A

DEVICE ADDRESSING

The 2-wire serial bus protocol mandates an 8 bits device address word after a START bit condition to invoke valid read

or write command. The first four most significant bits of the device address must be 1010, which is common to all

serial EEPROM devices. The next three bits are device address bits. These three device address bits (5

, 6

and 7

) are

to match with the external chip select/address pin states. If a match is made, the EEPROM device outputs an

ACKNOWLEDGE signal after the 8

read/write bit, otherwise the chip will go into STANDBY mode. However,

matching may not be needed for some or all device address bits (5

, 6

and 7

) as noted below. The last or 8th bit is a

read/write command bit. If the 8th bit is at V

then the chip goes into read mode. If a “0” is detected, the device enters

programming mode.

FT24C04A uses A2 (5

) and A1 (6

) device address bits. Only four FT24C04A devices can be wired-OR on the same

2-wire bus. Their corresponding chip select address pins A2 and A1 must be hard wired and coded from 00 (b) to 11

(b). Chip select address pin A0 is not used.

FT24C08A uses only A2 (5

) device address bit. Only two FT24C08A devices can be wired-OR on the same 2-wire

bus. Their corresponding chip select address pin A2 must be hard-wired and coded from 0 (b) to 1 (b). Chip select

address pins A1 and A0 are not used.

FT24C16A does not use any device address bit. Only one FT24C16A device can be used on the on 2-wire bus. Chip

Select address pins A2, A1, and A0 are not used.

WRITE OPERATIONS

(A) BYTE WRITE

A byte write operation starts when a micro-controller sends a START bit condition, follows by a proper EEPROM

device address and then a write command. If the device address bits match the chip select address, the EEPROM

device will acknowledge at the 9

clock cycle. The micro-controller will then send the rest of the lower 8 bits word

address. At the 18

cycle, the EEPROM will acknowledge the 8-bit address word. The micro-controller will then

transmit the 8 bit data. Following an ACKNOWLDEGE signal from the EEPROM at the 27

clock cycle, the

micro-controller will issue a STOP bit. After receiving the STOP bit, the EEPROM will go into a self-timed

programming mode during which all external inputs will be disabled. After a programming time of T

, the byte

programming will finish and the EEPROM device will return to the STANDBY mode.

(B) PAGE WRITE

A page write is similar to a byte write with the exception that one to sixteen bytes can be programmed along the

same page or memory row. All FT24C04A/08A/16A are organized to have 16 bytes per memory row or page.

With the same write command as the byte write, the micro-controller does not issue a STOP bit after sending the

byte data and receiving the ACKNOWLEDGE signal from the EEPROM on the 27

clock cycle. Instead it

sends out a second 8-bit data word, with the EEPROM acknowledging at the 36

cycle. This data sending and

EEPROM acknowledging cycle repeats until the micro-controller sends a STOP bit after the n



clock cycle.

After which the EEPROM device will go into a self-timed partial or full page programming mode. After the page

programming completes after a time of T

, the devices will return to the STANDBY mode.

DS3001M-page5

FT24C16A-USR-B Related Products

	FT24C16A-USR-B	FT24C08A-USG-B	FT24C04A-USR-B	FT24C04A-USG-B	FT24C04A-UTG-B	FT24C04A-UTR-B	FT24C08A-USR-B	FT24C08A-UTG-B	FT24C08A-UTR-B	FT24C16A-USG-B
Description	EEPROM, 2KX8, Serial, CMOS, PDSO8, SOP-8	EEPROM, 1KX8, Serial, CMOS, PDSO8, SOP-8	EEPROM, 512X8, Serial, CMOS, PDSO8, SOP-8	EEPROM, 512X8, Serial, CMOS, PDSO8, SOP-8	EEPROM, 512X8, Serial, CMOS, PDSO8, TSSOP-8	EEPROM, 512X8, Serial, CMOS, PDSO8, TSSOP-8	EEPROM, 1KX8, Serial, CMOS, PDSO8, SOP-8	EEPROM, 1KX8, Serial, CMOS, PDSO8, TSSOP-8	EEPROM, 1KX8, Serial, CMOS, PDSO8, TSSOP-8	EEPROM, 2KX8, Serial, CMOS, PDSO8, SOP-8
Is it lead-free?	Lead free	Lead free	Lead free	Lead free	Lead free	Lead free	Lead free	Lead free	Lead free	Lead free
Is it Rohs certified?	conform to	conform to	conform to	conform to	conform to	conform to	conform to	conform to	conform to	conform to
package instruction	SOP,	SOP,	SOP,	SOP,	TSSOP,	TSSOP,	SOP,	TSSOP,	TSSOP,	SOP,
Reach Compliance Code	unknow	unknow	unknown	unknown	unknow	unknow	unknow	unknow	unknow	unknow
Other features	IT ALSO HAVE FREQUENCY 0.4 MHZ OPERATES AT 1.8V	IT ALSO HAVE FREQUENCY 0.4 MHZ OPERATES AT 1.8V	IT ALSO HAVE FREQUENCY 0.4 MHZ OPERATES AT 1.8V	IT ALSO HAVE FREQUENCY 0.4 MHZ OPERATES AT 1.8V	IT ALSO HAVE FREQUENCY 0.4 MHZ OPERATES AT 1.8V	IT ALSO HAVE FREQUENCY 0.4 MHZ OPERATES AT 1.8V	IT ALSO HAVE FREQUENCY 0.4 MHZ OPERATES AT 1.8V	IT ALSO HAVE FREQUENCY 0.4 MHZ OPERATES AT 1.8V	IT ALSO HAVE FREQUENCY 0.4 MHZ OPERATES AT 1.8V	IT ALSO HAVE FREQUENCY 0.4 MHZ OPERATES AT 1.8V
Maximum clock frequency (fCLK)	1 MHz	1 MHz	1 MHz	1 MHz	1 MHz	1 MHz	1 MHz	1 MHz	1 MHz	1 MHz
JESD-30 code	R-PDSO-G8	R-PDSO-G8	R-PDSO-G8	R-PDSO-G8	R-PDSO-G8	R-PDSO-G8	R-PDSO-G8	R-PDSO-G8	R-PDSO-G8	R-PDSO-G8
length	4.9 mm	4.9 mm	4.9 mm	4.9 mm	4.4 mm	4.4 mm	4.9 mm	4.4 mm	4.4 mm	4.9 mm
memory density	16384 bi	8192 bi	4096 bit	4096 bit	4096 bi	4096 bi	8192 bi	8192 bi	8192 bi	16384 bi
Memory IC Type	EEPROM	EEPROM	EEPROM	EEPROM	EEPROM	EEPROM	EEPROM	EEPROM	EEPROM	EEPROM
memory width	8	8	8	8	8	8	8	8	8	8
Number of functions	1	1	1	1	1	1	1	1	1	1
Number of terminals	8	8	8	8	8	8	8	8	8	8
word count	2048 words	1024 words	512 words	512 words	512 words	512 words	1024 words	1024 words	1024 words	2048 words
character code	2000	1000	512	512	512	512	1000	1000	1000	2000
Operating mode	SYNCHRONOUS	SYNCHRONOUS	SYNCHRONOUS	SYNCHRONOUS	SYNCHRONOUS	SYNCHRONOUS	SYNCHRONOUS	SYNCHRONOUS	SYNCHRONOUS	SYNCHRONOUS
Maximum operating temperature	85 °C	85 °C	85 °C	85 °C	85 °C	85 °C	85 °C	85 °C	85 °C	85 °C
Minimum operating temperature	-40 °C	-40 °C	-40 °C	-40 °C	-40 °C	-40 °C	-40 °C	-40 °C	-40 °C	-40 °C
organize	2KX8	1KX8	512X8	512X8	512X8	512X8	1KX8	1KX8	1KX8	2KX8
Package body material	PLASTIC/EPOXY	PLASTIC/EPOXY	PLASTIC/EPOXY	PLASTIC/EPOXY	PLASTIC/EPOXY	PLASTIC/EPOXY	PLASTIC/EPOXY	PLASTIC/EPOXY	PLASTIC/EPOXY	PLASTIC/EPOXY
encapsulated code	SOP	SOP	SOP	SOP	TSSOP	TSSOP	SOP	TSSOP	TSSOP	SOP
Package shape	RECTANGULAR	RECTANGULAR	RECTANGULAR	RECTANGULAR	RECTANGULAR	RECTANGULAR	RECTANGULAR	RECTANGULAR	RECTANGULAR	RECTANGULAR
Package form	SMALL OUTLINE	SMALL OUTLINE	SMALL OUTLINE	SMALL OUTLINE	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	SMALL OUTLINE	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	SMALL OUTLINE, THIN PROFILE, SHRINK PITCH	SMALL OUTLINE
Parallel/Serial	SERIAL	SERIAL	SERIAL	SERIAL	SERIAL	SERIAL	SERIAL	SERIAL	SERIAL	SERIAL
Peak Reflow Temperature (Celsius)	NOT SPECIFIED	NOT SPECIFIED	NOT SPECIFIED	NOT SPECIFIED	NOT SPECIFIED	NOT SPECIFIED	NOT SPECIFIED	NOT SPECIFIED	NOT SPECIFIED	NOT SPECIFIED
Maximum seat height	1.75 mm	1.75 mm	1.75 mm	1.75 mm	1.1 mm	1.1 mm	1.75 mm	1.1 mm	1.1 mm	1.75 mm
Serial bus type	I2C	I2C	I2C	I2C	I2C	I2C	I2C	I2C	I2C	I2C
Maximum supply voltage (Vsup)	5.5 V	5.5 V	5.5 V	5.5 V	5.5 V	5.5 V	5.5 V	5.5 V	5.5 V	5.5 V
Minimum supply voltage (Vsup)	2.5 V	2.5 V	2.5 V	2.5 V	2.5 V	2.5 V	2.5 V	2.5 V	2.5 V	2.5 V
Nominal supply voltage (Vsup)	5 V	5 V	5 V	5 V	5 V	5 V	5 V	5 V	5 V	5 V
surface mount	YES	YES	YES	YES	YES	YES	YES	YES	YES	YES
technology	CMOS	CMOS	CMOS	CMOS	CMOS	CMOS	CMOS	CMOS	CMOS	CMOS
Temperature level	INDUSTRIAL	INDUSTRIAL	INDUSTRIAL	INDUSTRIAL	INDUSTRIAL	INDUSTRIAL	INDUSTRIAL	INDUSTRIAL	INDUSTRIAL	INDUSTRIAL
Terminal form	GULL WING	GULL WING	GULL WING	GULL WING	GULL WING	GULL WING	GULL WING	GULL WING	GULL WING	GULL WING
Terminal pitch	1.27 mm	1.27 mm	1.27 mm	1.27 mm	0.65 mm	0.65 mm	1.27 mm	0.65 mm	0.65 mm	1.27 mm
Terminal location	DUAL	DUAL	DUAL	DUAL	DUAL	DUAL	DUAL	DUAL	DUAL	DUAL
Maximum time at peak reflow temperature	NOT SPECIFIED	NOT SPECIFIED	NOT SPECIFIED	NOT SPECIFIED	NOT SPECIFIED	NOT SPECIFIED	NOT SPECIFIED	NOT SPECIFIED	NOT SPECIFIED	NOT SPECIFIED
width	3.9 mm	3.9 mm	3.9 mm	3.9 mm	3 mm	3 mm	3.9 mm	3 mm	3 mm	3.9 mm
Maximum write cycle time (tWC)	5 ms	5 ms	5 ms	5 ms	5 ms	5 ms	5 ms	5 ms	5 ms	5 ms
Maker	Fremont Micro Devices USA	-	-	-	Fremont Micro Devices USA	Fremont Micro Devices USA	Fremont Micro Devices USA	Fremont Micro Devices USA	Fremont Micro Devices USA	Fremont Micro Devices USA

Recommended Resources

Current negative feedback DC power amplifier

Non-inverting amplifier circuit with programmable amplification factor and select input

Flyback voltage stabilization circuit diagram

Reference source circuit diagram using LT1495 op amp

CMOS to VMOS interface circuit

LED that only flashes once

About the timerCC1 interrupt of STM32Fxxx: System clock 24mhz, timer3 time base 24mzTimer sets two events: CC1 comparison event 5us; update event 500us.At 100us, the CNT value of timer3 will be written to 0x0001 (external uart event). The 500u...; pala3cecili stm32/stm8

Lifestyle Photos Toshiba Gigabeat X30 Beautiful Pictures: [i=s]This post was last edited by jameswangsynnex on 2015-3-3 20:00[/i]...; lorant Mobile and portable

Emulation Extension Chip (EEC) Simplifies Integration of High-Speed Automotive Embedded Processors: As microcontroller clock speeds increase, debugging and calibration become more difficult. Embedded emulation equipment can provide automotive electronics design engineers with visibility into the int...; amethyst Automotive Electronics

Two chips for wireless transmission and reception: [i=s]This post was last edited by paulhyde on 2014-9-15 09:24[/i] Remote control encoder circuit SC2262 and remote control decoder circuit SC2272...; xzyy0630 Electronics Design Contest

About writing device drivers with winddk and vc: How to solve the problem "the driver is marked as disabled" when testing the driver with DirverMonitor...; lnb19850110 Embedded System

Some strange problems with mm32F103: Hello, I recently replaced stm32f103 with MM32F103 and encountered two strange problems. After burning the program with ISPV2.3Problem 1: PB3 can work normally, but PB3 cannot work normally after rese...; TEL18688947970 Domestic Chip Exchange

Shortcut: L0 L1 L2 L3 L4 L5 L6 L7 L8 L9 LA LB LC LD LE LF LG LH LI LJ LK LL LM LN LO LP LQ LR LS LT LU LV LW LX LY LZ M0 M1 M2 M3 M4 M5 M6 M7 M8 M9 MA MB MC MD ME MF MG MH MI MJ MK ML MM MN MO MP MQ MR MS MT MU MV MW MX MY MZ N0 N1 N2 N3 N4 N5 N6 N7 N8 NA NB NC ND NE NF NG NH NI NJ NK NL NM NN NO NP NQ NR NS NT NU NV NX NZ O0 O1 O2 O3 OA OB OC OD OE OF OG OH OI OJ OK OL OM ON OP OQ OR OS OT OV OX OY OZ P0 P1 P2 P3 P4 P5 P6 P7 P8 P9 PA PB PC PD PE PF PG PH PI PJ PK PL PM PN PO PP PQ PR PS PT PU PV PW PX PY PZ Q1 Q2 Q3 Q4 Q5 Q6 Q8 Q9 QA QB QC QE QF QG QH QK QL QM QP QR QS QT QV QW QX QY R0 R1 R2 R3 R4 R5 R6 R7 R8 R9 RA RB RC RD RE RF RG RH RI RJ RK RL RM RN RO RP RQ RR RS RT RU RV RW RX RY RZ

Popular Components