EEWORLDEEWORLDEEWORLD

Part Number

Search

550D825X9035R2

Description
Solid-Electrolyte TANTALEX® Capacitors for High Frequency Power Supplies
File Size150KB,8 Pages
ManufacturerVishay
Websitehttp://www.vishay.com
Download Datasheet View All

550D825X9035R2 Overview

Solid-Electrolyte TANTALEX® Capacitors for High Frequency Power Supplies

550D
Vishay Sprague
Solid-Electrolyte T
ANTALEX®
Capacitors
for High Frequency Power Supplies
FEATURES
• Hermetically-sealed, axial-lead solid tantalum capacitors
• Small size and long life
• Exceptional capacitance stability and excellent resistance
to severe environmental conditions
• The military equivalent is the CSR21 which is qualified to
MIL-C-39003/09
APPLICATIONS
Designed for power supply filtering applications at above
100kHz
PERFORMANCE CHARACTERISTICS
Operating Temperature:
- 55°C to + 85°C. (To + 125°C
with voltage derating.)
Capacitance Tolerance:
At 120 Hz, + 25°C.
±
20% and
±
10% standard.
±
5% available as a special.
Dissipation Factor:
At 120 Hz, + 25°C. Dissipation factor,
as determined from the expression 2πfRC, shall not exceed
the values listed in the Standard Ratings Tables.
DC Leakage Current (DCL Max.):
At + 25
°
C:
Leakage current shall not exceed the values
listed in the Standard Ratings Tables.
At + 85
°
C:
Leakage current shall not exceed 10 times the
values listed in the Standard Ratings Tables.
At +125
°
C:
Leakage current shall not exceed 15 times the
values listed in the Standard Ratings Tables.
Life Test:
Capacitors shall withstand rated DC voltage
applied at + 85°C for 2000 hours or derated DC voltage
applied at + 125°C for 1000 hours.
Following the life test:
1. DCL shall not exceed 125% of the initial requirement.
2. Dissipation Factor shall meet the initial requirement.
3. Change in capacitance shall not exceed
±
5%.
ORDERING INFORMATION
550D
MODEL
006
2
R
DC VOLTAGE
CASE STYLE NUMBER
RATING AT + 85°C
CODE
This is expressed in
This is expressed in picofarads. The X0 =
±
20%
See Ratings 2 = Insulated
volts. To complete the
first two digits are the significant figures. X9 =
±
10%
sleeve.
and Case
three-digit block, zeros Codes Table.
The third is the number of zeros to
X5 =
±
5%
follow. Standard capacitance ratings
Special Order. precede the voltage
rating.
are in accordance with EIA preferred
number series wherever possible.
157
CAPACITANCE
X0
CAPACITANCE
TOLERANCE
T
PACKAGING
T = Tape and Reel
DIMENSIONS
in inches [millimeters]
1.500
±
0.250
[38.10
±
6.35]
L
1.500
±
0.250
[38.10
±
6.35]
D
Dia.
Solid Tinned
Leads
J
Max.
0.047 [1.19] Max.
0.125 [3.18] Max.
WITH INSULATING SLEEVE*
CASE CODE
R
S
D
0.289
±
0.016
[7.34
±
0.41]
0.351
±
0.016
[8.92
±
0.41]
L
0.686
±
0.031
[17.42
±
0.79]
0.786
±
0.031
[19.96
±
0.79]
J (MAX.)
0.822
[20.88]
0.922
[23.42]
AWG NO.
22
22
LEAD SIZE
NOM. DIA.
0.025
[0.64]
0.025
[0.64]
*When a shrink-fitted insulation is used, it shall lap over the ends of the capacitor body.
www.vishay.com
24
For technical questions, contact tantalum@vishay.com
Document Number: 40017
Revision 11-Nov-04
Can the P1 port of 51 microcontroller be connected to the data input port of 8255 chip?
[backcolor=rgb(238, 238, 238)][font=Tahoma, Helvetica, SimSun, sans-serif][size=12px]The P0 port of the 51 microcontroller is the data bus. I don’t know if the P1 port can be connected to the data inp...
晓寒 51mcu
AC bridge leveling problem
[:$] I need to build an AC bridge myself for an experiment recently, but it is difficult to adjust the balance. Can an expert give me some advice?...
pao9521 Test/Measurement
How to control the frequency of the oscillating mirror inside the scanner?
How to control the frequency of the oscillating mirror inside the scanner gun?...
哎丹杰 Analog electronics
Help! Common Problems in Using Voltage Comparators
When the amplitude of the comparator input signal is too high, the output square wave will have an overshoot. The larger the input signal amplitude, the stronger the overshoot. I have tried adding a d...
lmldc611 Analog electronics
Power outage emergency lighting
The circuit working principle of the device is shown in Figure 11. Power outages are common, but in some situations, power outages are not allowed (such as during surgery). The circuit designed with L...
yuandayuan6999 DIY/Open Source Hardware
I want to ask the moderator (4)
If I buy the chip and solder it myself, what kind of connector should be used for the input of the signal source? What kind of connector should be used for the output of the system? What are the requi...
xujia525 RF/Wirelessly

EEWorld
subscription
account

EEWorld
service
account

Automotive
development
circle

Robot
development
community

Index Files: 41  79  1760  1863  1049  1  2  36  38  22 
Datasheet   0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
Room 1530, 15th Floor, Building B, No. 18 Zhongguancun Street, Haidian District, Beijing Telephone: (010) 82350740 Postal Code: 100190
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved 京ICP证060456号 京ICP备10001474号-1 电信业务审批[2006]字第258号函 京公网安备 11010802033920号