PRODUCT INFORMATION
UNITRONIC® 300 / UNITRONIC® 300 S
Control and signal cables with small cross sections - UL/CSA listed
UNITRONIC® 300/300 S: unscreened or screened Low-frequency PVC data cable, UL/CSA AWM, CMG, Further Tray Cable
listings for Cable tray installation, -25°C/105°C
Info
Designation of shielded version:
Formerly "UNITRONIC
®
300 CY",
now "UNITRONIC
®
300 S"
Other sizes on request
Especially for 20 AWG and 18 AWG: With standard core color code, up to 60 conductors producible/ With non-standard color
code, e.g., green-yellow grounding conductor, up to 100 cores
UV-resistant
Torsion-resistant
Temperature-resistant
Oil-resistant
Wind Energy
Flame-retardant
Cold-resistant
Last Update (22.11.2016)
©2016 Lapp Group - Technical changes reserved
Product Management www.lappkabel.de
You can find the current technical data in the corresponding data sheet.
PN 0456 / 02_03.16
PRODUCT INFORMATION
UNITRONIC® 300 / UNITRONIC® 300 S
Benefits
Wide application range due to multiple certifications
Cost-saving, easy installation due to omission of closed raceways (suitable for open wiring)
Application range
Control and signal cables for internal and external wiring
Process control; electrical equipment; industrial machinery; low-voltage control interconnect
For the North American market
Thanks to the DIRECT BURIAL approval, direct burial of versions with the nominal conductor cross sections 18 AWG and 16
AWG is normatively permitted in the USA
Product features
CMG (for USA and Canada) and PLTC (for USA) for tray use in North America (24 AWG has got no PLTC certification)
PLTC-ER & ITC-ER ("-ER" = Exposed Run: According to NEC/ NFPA 70 for unprotected transitions of the cable, each not
longer than 1.8 m or 6 ft., outside of trays and in the USA) for 18 AWG and 16 AWG
UV-resistant UL SUN RES
DIRECT BURIAL certification for 18 AWG & 16 AWG for normatively permitted, direct burial in the USA
Suitable for torsional applications which are typical for the loop in wind turbine generators (WTG)
Norm references / Approvals
UL: CMG per UL 444; PLTC-ER per UL 13 (18 AWG + 16 AWG); PLTC (not for 24 AWG); ITC-ER per UL 2250 (18 AWG + 16
AWG); UL AWM Style 2464
According to NEC/ NFPA 70, 2014 HANDBOOK, ARTICLE 501, II., 501.10, (B), (1), and apart from any kind of "Flexible
Connections", suitability for Class I, Division 2 in the USA, and that for all versions with ITC-ER as per NEC 2014 ARTICLE
727.4 and in conjunction with additional UL listed components as well as for all versions with PLTC or PLTC-ER in line with the
provisions of NEC 2014 ARTICLE 725 and in mandatory conjunction with tray use and additional, UL listed components
Canada: c(UL) CMG FT4, CSA AWM I/II A/B FT1
Oil-resistant according to UL OIL RES I
Product Make-up
Fine-wire strand made of tinned-copper wires
Core insulation made of PVC compound
UNITRONIC® 300 S: with overall foil tape wrapping, drain wire,
tin-plated copper braiding (75 % coverage)
Outer jacket: Specially Formulated PVC
Color of the outer jacket: Dark gray (similar to RAL 7005)
Last Update (22.11.2016)
©2016 Lapp Group - Technical changes reserved
Product Management www.lappkabel.de
You can find the current technical data in the corresponding data sheet.
PN 0456 / 02_03.16
PRODUCT INFORMATION
UNITRONIC® 300 / UNITRONIC® 300 S
Technical Data
Classification:
ETIM 5.0 Class-ID: EC000104
ETIM 5.0 Class-Description: Control cable
refer to Appendix T9
Fine wire
TW-0 & TW-1, refer to Appendix T0
During installation: 4 x cable diameter
Screened: 6 x outer diameter
according to UL: 300 V
IEC: not for power transmission
1500 V
Occasional flexing: -25°C to +105°C (AWM for USA: +80°C)
Fixed installation: -40°C to +105°C (AWM for USA: +80°C)
Core identification code:
Conductor stranding:
Torsion movement in WTG:
Minimum bending radius:
Nominal voltage:
Test voltage:
Temperature range:
Note
Unless specified otherwise, the shown product values are nominal values. Detailed values (e.g. tolerances) are available upon
request.
Copper price basis: EUR 150/100 kg. Refer to catalogue appendix T17 for the definition and calculation of copper-related
surcharges.
Please find our standard lengths at: www.lappkabel.de/en/cable-standardlengths
Packaging size: Coil 152 m; Drum 305 m
Photographs are not to scale and do not represent detailed images of the respective products.
* Prices are net prices without VAT and surcharges. Sale to business customers.
Last Update (22.11.2016)
©2016 Lapp Group - Technical changes reserved
Product Management www.lappkabel.de
You can find the current technical data in the corresponding data sheet.
PN 0456 / 02_03.16
京公网安备 11010802033920号
EEWORLD
