EEWORLDEEWORLDEEWORLD

Part Number

Search

CC2420DBK

Description
2.4 GHz IEEE 802.15.4 / ZigBee-ready RF Transceiver
File Size878KB,87 Pages
ManufacturerETC1
Download Datasheet Compare View All

CC2420DBK Online Shopping

Suppliers Part Number Price MOQ In stock  
CC2420DBK - - View Buy Now

CC2420DBK Overview

2.4 GHz IEEE 802.15.4 / ZigBee-ready RF Transceiver

SmartRF
CC2420
®
CC2420
2.4 GHz IEEE 802.15.4 / ZigBee-ready RF Transceiver
Applications
2.4 GHz IEEE 802.15.4 systems
ZigBee systems
Home/building automation
Industrial Control
Wireless sensor networks
PC peripherals
Consumer Electronics
Product Description
The
CC2420
is a true single-chip 2.4 GHz
IEEE 802.15.4 compliant RF transceiver
designed for low-power and low-voltage
wireless applications.
CC2420
includes a
digital direct sequence spread spectrum
baseband modem providing a spreading
gain of 9 dB and an effective data rate of
250 kbps.
The
CC2420
is a low-cost, highly integrated
solution for robust wireless communication
in the 2.4 GHz unlicensed ISM band. It
complies with worldwide regulations
covered by ETSI EN 300 328 and EN 300
440 class 2 (Europe), FCC CFR47 Part 15
(US) and ARIB STD-T66 (Japan).
The
CC2420
provides extensive hardware
support for packet handling, data
buffering, burst transmissions, data
encryption, data authentication, clear
channel assessment, link quality indication
and packet timing information. These
features reduce the load on the host
controller and allow
CC2420
to interface
low-cost microcontrollers.
The configuration interface and transmit /
receive FIFOs of
CC2420
are accessed via
an SPI interface. In a typical application
CC2420
will be used together with a
microcontroller and a few external passive
components.
CC2420
is based on Chipcon’s SmartRF
®
-
03 technology in 0.18
µm
CMOS.
Key Features
True single-chip 2.4 GHz IEEE
802.15.4 compliant RF transceiver
with baseband modem and MAC
support
DSSS baseband modem with 2
MChips/s and 250 kbps effective data
rate.
Suitable for both RFD and FFD
operation
Low current consumption (RX: 19.7
mA, TX: 17.4 mA)
Low supply voltage (2.1 – 3.6 V) with
integrated voltage regulator
Low supply voltage (1.6 – 2.0 V) with
external voltage regulator
Programmable output power
No external RF switch / filter needed
I/Q low-IF receiver
I/Q direct upconversion transmitter
Very few external components
128(RX) + 128(TX) byte data buffering
Digital RSSI / LQI support
Hardware MAC encryption (AES-128)
Battery monitor
QLP-48 package, 7x7 mm
Complies with ETSI EN 300 328, EN
300 440 class 2, FCC CFR-47 part 15
and ARIB STD-T66
Powerful and flexible development
tools available
Chipcon AS
SmartRF
®
CC2420 Preliminary Datasheet (rev 1.2), 2004-06-09
Page 1 of 87

CC2420DBK Related Products

CC2420DBK CC2420 CC2420/TR CC2420DK CC2420SK
Description 2.4 GHz IEEE 802.15.4 / ZigBee-ready RF Transceiver 2.4 GHz IEEE 802.15.4 / ZigBee-ready RF Transceiver 2.4 GHz IEEE 802.15.4 / ZigBee-ready RF Transceiver 2.4 GHz IEEE 802.15.4 / ZigBee-ready RF Transceiver 2.4 GHz IEEE 802.15.4 / ZigBee-ready RF Transceiver
Help, I used the kernel compiled with PB5.0 and the system booted successfully on CEPC, but the hard disk and CD-ROM drive initialization failed (cannot be found)
I used PB5.0 to compile the kernel on CEPC. The system booted successfully, but the hard disk and optical drive failed to initialize (the optical drive and hard disk were not found). I did add the cor...
5133858 Embedded System
230 Proteus simulation examples for 51 MCU
[[i] This post was last edited by GONGHCU on 2013-11-28 09:34[/i]]...
GONGHCU 51mcu
Rayeager PX2 adb device driver under linux
Refer to the method provided by Google: [url]http://developer.android.com/tools/device.html[/url], but found that some Android devices still cannot be connected after doing these, of course some can b...
穿prada的008 Linux and Android
How to access the contents of the network card register
Dear friends: The "Resource" option of my network card is as follows: "Memory range EE000000-EE000FFF, Input/Output range C000-C03F Interrupt request 11". Now I want to access the contents of the regi...
jackwellsun88 Embedded System
SensorTag debugging method without DevPack [Transfer]
How to setup XDS100v3 (Olimex) to be able to run example project UartEcho with CC2650/CC2640 on a custom board or SensorTag[/b][float=left][color=rgb(85, 85, 85)][font="][float=right][size=0.9em]275[/...
shinykongcn Wireless Connectivity
Qt for wince development environment configuration
I want to ask for the configuration of qt for wince development environment? 50 points for successful configuration! OOO.........
ap0405326 Embedded System

EEWorld
subscription
account

EEWorld
service
account

Automotive
development
circle

Robot
development
community

Index Files: 1375  631  1643  2445  2706  28  13  34  50  55 
Datasheet   0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
Room 1530, 15th Floor, Building B, No. 18 Zhongguancun Street, Haidian District, Beijing Telephone: (010) 82350740 Postal Code: 100190
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved 京ICP证060456号 京ICP备10001474号-1 电信业务审批[2006]字第258号函 京公网安备 11010802033920号