Lists UL Recognized & CSA Certified configurations and performance capabilities as a Component Supplementary Protector.
Notes:
1
Requires branch circuit backup with a UL LISTED Type K5 or RK5 fuse (15A minimum) at no more than 4 times the rating of the protector.
2
Same as note 1, except that backup fuse is limited to 80A maximum.
3
2 pole protector required (with one pole per power line) for: 250/125 VAC, 125/250 VAC and 208Y/120 VAC Power Systems. 1 pole protector required for : 125 VAC, 1Ø Power System.
4
Satisfies the requirements of clause 11.2.8.2.5 of CSA STD C22.2 No 100 for the use of supplementary protectors with portable generators.
Lists UL Recognized, CSA, VDE & TUV Certified configurations & performance capabilities as a Component Supplementary
Protector.
Notes:
1
General Purpose Ratings for UL/CSA Only.
2
Requires branch circuit backup with a UL LISTED Type K5 or RK5 fuse (15A minimum) at no more than 4 times the rating of the protector.
3
Same as note 1, except that backup fuse is limited to 80 A maximum.
Table C:
Lists UL Recognized, CSA Certified configurations and performance capabilities as Protectors, Supplementary for Marine
Electrical and Fuel Systems (CCN/Guide PEQZ2, File E75596). Ignition Protected per UL 1500. UL Classified Small Craft Electrical Devices,
Marine in accordance with ISO 8846 (CCN/Guide UZMK, File MQ1515) as Marine Supplementary Protectors.
Notes:
1
Available with special catalog number only (consult factory).
2
2 pole protector required (with one pole per power line) for: 250/125 VAC, 125/250 VAC and 208Y/120 VAC Power Systems. 1 pole protector required for : 125 VAC, 1Ø Power System.
[b]17. iperf - Network Performance Tool[/b][align=left][color=rgb(0, 0, 0)][font=Tahoma, Helvetica, SimSun, sans-serif][size=14px][b]iperf[/b] is a [b]network testing[/b] tool that can create [b]TCP[/...
I found a few good articles on the Delta-Q website. One of them involved some difficulties in the design of on-board chargers. I roughly sorted them out for reference by my peers. [b]Chargers Integral...
I would like to ask all the experts, have you ever used MSP430 external uart ic? If so, which model is it? I have a restriction that I can only use the general IO port to connect, not SPI. At present,...
I have been using the STM32 development board for a year. I feel that this board is relatively cost-effective and has a complete range of functions. However, I think the display screen is a bit small ...
Embedded System
京公网安备 11010802033920号
EEWORLD
