The Ortel PONA 2100 Series Erbium Doped Fiber Amplifier (EDFA)
is an ideal building block for OEM system integrators. The family of
PONA 2100 series EDFAs is designed to meet the most demanding
noise performance requirements of CATV applications, and
performs all the functions required of an optical amplifier for system
integration. PONA 2100 series EDFAs provide optical isolation on
the input and output of the gain block for stable, low noise operation.
The input and output optical signal power levels are detected for
monitoring and control. The input optical signal is amplified with
active gain control for a constant output power level, or with active
output power control for constant gain mode.
The PONA 2100
series EDFAs also provide monitors and associated alarms for all
vital characteristics. The optical output of the PONA 2100 series
EDFAs can be split into multiple ports by an optional external
splitter.
For more information on this and other products:
Contact Sales at Ortel 626-293-3400, or visit www.ortel.com.
PONA 2100 Series EDFA
Rev B
DATA SHEET
|
FEBRUARY 2006
Optical / Electrical Characteristics
PROPERTY
Product Code
PERFORMANCE
Operating Input Power
Operating Input Power
Output Power
Noise Figure
(Note 2)
Pin
(dBm)
Pin
(dBm)
Po(dBm)
NF (dB)
NF (dB)
NF (dB)
Static Gain Flatness
Dynamic Gain Flatness
(Note 4)
GF (dB)
(dB)
(dB)
(dB)
Output Power Stability
Power Consumption
(steady state regime)
Notes
:
1.
2.
3.
4.
5.
(dB)
Psys(W)
Typ/Max
Typ/Max
Typ/Max
Max
Max
Max
Max
Max
Max
Max
Min
12
-10
14
+/-.25
4.5/5.0
4.0/4.5
4.0/4.5
+/-0.5
+/-1.0
+/-0.5
+/-0.5
+/- 0.1
5
12
-10
17
+/- .25
4.5/5.0
4.0/4.5
4.0/4.5
+/-0.5
+/-1.25
+/-0.5
+/-0.5
+/- 0.1
7
12
-10
20
+/- .25
4.5/5.0
4.0/4.5
4.0/4.5
+/-0.5
+/-1.5
+/-1.0
+/-1.0
+/- 0.1
9
12
-10
22
+/- .25
4.5/5.0
4.0/4.5
4.0/4.5
+/-0.5
+/-2.0
+/-1.0
+/-1.0
+/- 0.1
12
12
-10
24
+/- .25
5.0/5.5
4.5/5.0
4.5/5.0
+/-0.5
+/-2.0
+/-1.0
+/-1.0
+/- 0.1
20
12
-10
26
+/- .25
5.0/5.5
4.5/5.0
N/A
+/-0.5
+/-2.0
N/A
N/A
+/- 0.1
27
12
-10
27
+/- .25
5.0/5.5
4.5/5.0
N/A
+/-0.5
+/-2.0
N/A
N/A
+/- 0.1
32
Nominal
-00 and -01 versions
-02 version
-03 version
(Note 3)
-00 and -02 versions
-01 version
-03 version
(Note 5)
50 C Case
o
UNIT
LIMIT
2114
2117
PONA MODELS
2120
2122
2124
2126
2127
COMMENTS
(note 1)
Unless stated otherwise all specifications apply over the full temperature range and humidity
Measured with 8 evenly spread signals @ 25°C,
Σ
Pin = 0 dBm.
Measured with a swept Probe Signal (Pp), where Pp = 0 dBm @ 25°C
Measured with a swept Probe Signal (Pp), and a fixed Tone Signal (Pt) @ 1545 nm; (Pt = Pp+20 dB; Pt + Pp = 0 dBm) @ 25°C; Gain
Flattened Option with
∆G
= +/-0.5dB is available for some Models
Stability over polarization and temperature
General and Mechanical Specifications
PROPERTY
GENERAL
Operating Wavelength
Operating Case Temperature
Storage Temperature
Operating Humidity
Voltage Supply Range
Optical Connectors
Dimensions In Inches
REQUIREMENT
1530 ~ 1562nm
0°C to 50°C
-40°C to 85°C
20% to 85%
85 VAC to 265 VAC 50/60 Hz
-36 to –60 V DC
SC/APC; SC/UPC; FC/APC;
FC/UPC; E2000/APC
19.0”W x 14.76”D x 1.72”H
Non-condensing
Standard
Optional
User Specified
19’’ Rack Mounted, 1U
Standard
COMMENTS
Ortel, a division of EMCORE
2 of 4
PONA 2100 Series EDFA
Rev B
DATA SHEET
|
FEBRUARY 2006
Outline Drawing
AC and DC versions shown below with 8-port option
DC Version
AC Version
Ortel, a division of EMCORE
3 of 4
PONA 2100 Series EDFA
Rev B
DATA SHEET
|
FEBRUARY 2006
Compliance Information
89/336/EEC Electromagnetic Compatibility Directive, amended by 92/31/EEC & 93/68/EEC
73/23/EEC Low Voltage Directive, amended by 93/68/EEC
EN 50083-2, (2001)
Cable networks for TV signals, sounds and interactive services, Part 2 Electromagnetic
Compatibility for equipment.
EN 55013
EN 61000-3-2
EN 55020
EN 61000-4-6
EN 61000-4-3
EN 61000-4-2
EN 61000-4-4
EN 60950
EN 60825-1
EN 60825-2
CDRH
Mains Conducted Emissions
Mains Frequency and its Harmonics, Conducted Emissions
Radiation from Active Equipment, Radiated Immunity
Immunity of Active Equipment, Radiated Immunity
Immunity of Active Equipment, Radiated Immunity
Electrostatic Discharge Immunity
Electrical Fast Transient / Burst Immunity
Low Voltage Directives
Laser Safety Requirement
Laser Safety Requirement
Laser Safety Requirement
Ordering Information
PONA21
-
-
-
-
Optical
Output
Power
14
- 14 dBm
17
- 17 dBm
20
- 20 dBm
22
- 22 dBm
24
- 24 dBm
26
- 26 dBm
27
- 27 dBm
Output
Ports
1
2
4
8
Input Voltage
AC
– 90-260V 50/60 Hz
DC
– - 48 V
SC
FC
EC
TC
GC
Connector
-
-
-
-
-
SC/APC
FC/APC
E2000/APC
SC/UPC
FC/UPC
GFF/ NF options
00 - Standard
01 - Standard with Gain Flattened option
02 - Standard with Low NF option
03 - Low NF and Gain Flattened
Note: The maximum number of output ports when using E2000 connectors is four. All other optical connectors allow for
the eight ports option
Example:
PONA2120-2-AC-SC-00:
Standard 20 dBm EDFA with AC Power Supply, two (2) optical outputs, and SC/APC optical connectors
Information contained herein is deemed to be reliable and accurate as of issue date. EMCORE reserves the right to change the design or specifications of
the product at any time without notice. Ortel, the Ortel logo, EMCORE, and the EMCORE logo are trademarks of EMCORE Corporation.
In the I2C chapter of the STM32F manual, in the "Master receiver" section, it is stated that in order for the host to generate a non-acknowledgement (NACK) signal after receiving the last byte from th...
1. Pigs and dogs are the jailers of the animal kingdom. One day, they caught an uninvited guest named SMS and imprisoned him. The next day, SMS escaped from prison. The warden held the dog responsible...
Dear experts, I've been playing with Beagle Bone Black recently. I saw other people's posts and tried to connect Beagle Bone Black to the Internet through an external network card, but I still failed ...
Traditional broadcasting systems generally need to be operated manually at a fixed time, and can only realize one-way broadcasting with few functions. Traditional bell ringing equipment has a singl...[Details]
Assume that data is read from 8-bit AD (if it is a higher-bit AD, the data type can be defined as int), the subroutine is get_ad();
1. Limited secondary filtering
/* A value can be adjust...[Details]
Microchip's PIC18F46J50 is a low-power, high-performance 8-bit USB microcontroller (MCU) using nanoWatt XLP technology. The current in deep sleep mode can be as low as 13nA, the operating voltage i...[Details]
1. Circuit composition
The whole circuit consists of two parts:
1. Power saving control circuit
As shown in the figure below. Including delay circuit and drive circuit.
(1) Delay ci...[Details]
1. Introduction
With the growth of parking demand, the scale of parking lots is becoming larger and larger. A lot of research has been done on intelligent parking lots in China, but most of th...[Details]
Floating-point digital signal processing has become a constant requirement for precision technology, often in applications requiring high accuracy in areas such as aviation, industrial machinery, a...[Details]
Converged processors meet scalability requirements
In current embedded system design, solutions based on MCU, DSP, FPGA and ASIC account for more than 90% of the market share. These solutions ...[Details]
1 Introduction
Solar street lights are mainly composed of four parts: solar photovoltaic cell components, batteries, charge and discharge controllers, and lighting fixtures. The bo...[Details]
Two simple circuits are implemented to drive two LEDs from a battery powered microprocessor.
This design is based on a circuit that uses three resistors and a microprocessor I/O pin as an input h...[Details]
Microcalorimetry
is used to determine energy relationships. Microcalorimetry techniques are often required when performing calorimetric experiments with small sample sizes or slow heating rat...[Details]
1. Background:
The instrument system parameter detection and control of the chemical production workshop of Tangshan Coal Gas Coking Plant are all analog instruments, some of which are eve...[Details]
1. With the development of modern industry and the continuous improvement of automation, some medium and large control systems have been greatly facilitated, which not only makes control easier, bu...[Details]
The potentiometer is an adjustable electronic component. The main functions of the potentiometer in the circuit are as follows:
1. Used as a voltage divider
A potentiometer is a continuou...[Details]
Overview
In spectral measurement, photomultiplier tubes (PMT) and charge-coupled devices (CCD) are often used as photoelectric converters. PMT is used in slow-changing, high-precision spectral...[Details]
With concerns about the growing energy crisis, motor efficiency has become an important and timely topic. This is because motors use 63% to 70% of the electricity produced in the United States and ...[Details]
stm32/stm8
京公网安备 11010802033920号
EEWORLD
