HA
Vishay Sprague
Subminiature, Leaded Solid Tantalum Capacitors
Polar or Non-polar
FEATURES
• Subminiature package size and light weight
• Cylindrical case with axial or radial leads
• 2 to 50 VDC
• 0.001µF to 68µF
• Operating temperature range : - 55°C to + 125°C
• High stability and reliability
• Tested in accordance with MIL-PRF-49137
• Unique and comprehensive custom design capability
ELECTRICAL CHARACTERISTICS
Operating temperature range:
- 55°C to + 125°C
Capacitance:
Measured at 120 Hz and 25°C with a
maximum of 2.2 VDC bias and 1.0 volt rms signal.
Capacitance Tolerance:
Standard tolerance is
±
20% for
ratings 0.1µF and above, and + 40, - 20% for ratings below
0.1µF. Special tolerances are also available.
Dissipation Factor:
When measured simultaneously with
capacitance, DF shall not exceed the value shown in the
ratings tables.
DC Leakage Current (DCL Max):
When measured with DC voltage applied through a 1,000Ω
resistor for 5 minutes, DC leakage (µA) shall not exceed:
At @ 25
°
C:
Leakage current shall not exceed the values
listed in the Standard Ratings Tables
At @ 85
°
C:
Leakage current shall not exceed 10 times the
values listed in the Standard Ratings Tables
At @ 125
°
C and 66% of rated voltage:
Leakage current
shall not exceed 15 times the values listed in the Standard
Ratings Tables.
Operating Voltage:
Full working voltage up to 85°C. From
85°C to 125°C working voltage derates linearly to 66% of
the 85°C working voltage.
APPLICATIONS
• Hearing aids
• Portable communications
• Space/avionics
• Laptop computers.
MECHANICAL SPECIFICATIONS
Solder coated nickel leads (type N32 per MIL-STD-1276)
are standard on all case sizes.
Leads are weldable and/or solderable.
Special leads are available on request (e.g. bare nickle, gold
plated nickle or ribbon leads).
Lead length is 1 1/2” [38.1 mm] minimum on nonpolar parts.
On polar parts the negative lead is 1-1/4” [31.8mm] minimum
and the positive lead is 1-1/2” [38.1mm] minimum.
ORDERING INFORMATION
HA
MODEL
1.0
CAPACITANCE
IN
µF
35
DC VOLTAGE RATING
AT + 85°C
C7
CASE CODE
C = Polar
N = Nonpolar
A*
LEAD
CONFIGURATION
A = Axial
R = Radial
M
CAPACITANCE
TOLERANCE
E = +40, -20%
M =
±
20%
K =
±
10%
J =
±
5%
Example of Part Number Code: HA1.0-35C7AM
* To complete part number in rating tables, add A or R.
Change suffix if special capacitance tolerance is required.
www.vishay.com
60
For technical questions, contact europetantalum@vishay.com
Document Number: 43003
Revision 13-Jun-02
TI Technology Forum
京公网安备 11010802033920号
EEWORLD
