Class 1E qualified connector with quick connect 1/4 turn bayonet
coupling designed to operate safely during normal and seismic conditions
in various applications in the reactor containment buildings.
High sealing level
✓
✓
✓
✓
Submersion: 6 m of water; 24 hrs
Jet spray: 0,1MPa; 1 min
5
Temperature range: -10 to 70°C (1 to 1
4
58°F)
Radiation: 25 MRads at 20°C (68°F)
Salt spray resistance: 168 hrs
Environmental performances
Accident testing
Operating Basis Earthquake (OBE): 3g ZPA
Safe Shutdown Earthquake (SSE): 6g ZPA
Qualification standards
EDF HM63 / 7195, Class 1E K2;
RCC-E 1993 & 2002
8N45 Series
Reactor Containment Certified Connectors
Description
• Class 1E qualified connectors
• Quick connect ¼ turn bayonet coupling
• High shielding performances
• Qualification standards:
- H-M2A-2007-01
218-FR
- RCC-E 2005
Applications
• Instrumentation, sensors, probes
• Mandatory for new EPR programs
Technical features
Electrical
• Current rating: 1 A max
1
• Peak current: 50A / 30ms
• Test Voltage rating: 2000 Vrms
• Insulation Resistance:
≥
5000 MΩ under
500 Vdc
• Contact resistance: 5 mΩ
• Shielding resistance:
≤
20 mΩ
Mechanical
• Mating / Unmating effort: 0,1 daN.m
2
• Endurance: 500 mating / unmating
• Cable clamp resistance:
Traction 50 N / Torsion 0,5 Nm
Environmental
• Ambient temperature:
-10 to 70°C (1 to 1
4
58°F)
• Max temperature: 85°C (185°F)
• Ambient humidity: 75% max.
• Cumulated radiation: 250 kGy (25 MRads) /
70°C (1
58°F)
• Dry heat test: 40°C (104°F) / 93% HR / 504h
• Salt spray resistance: 168h
• Protection against water penetration:
- IP X6
- IP 68
Seism / Vibration
• Seism:
- Operating Basis Earthquake (OBE): 3g ZPA
- Safe Shutdown Earthquake (SSE): 6g ZPA
• Vibration (Sine): 10 to 2000Hz; 0,35 mm; 5g
Materials
& Plating
Connector Part
Shells
Stainless Steel
Nickel (locally)
Insulator & grommet
Silicon
/
Seals
Silicon
/
Contacts
Copper alloy
(Zinc / Lead)
Gold over nickel
Material
Plating
2
8N45 Series
Reactor Containment Certified Connectors
Features & benefits
Class 1E Safety Connectors
Designed and manufactured according to RCC-E code
8N45 Series connectors meet the design and manufacturing rules of AFCEN’s RCC-E code, which stands as one
of the major worldwide references for safety electrical equipments of nuclear islands.
K2 Qualified for 40 years operation
8N45 Series connectors are K2 qualified according to RCC-E, which means they are suitable for use on safety
related equipments inside reactor building, under normal and seismic conditions. The qualified lifetime of 8N45
Series connectors is 40 years.
Approved quality assurance program
SOURIAU quality assurance program meets International & Nuclear standards:
• ISO/EN 9001: 2000
• ISO 1
7025
• SGAQ DIN-DPN 2004-04
• Q/N/100, Q/N/200, Q/N/300
• KTA 3507
• NQA-1-1994 & NQA-1a-1995
• 10 CFR50 Appendix B
• 10 CFR21
Applications
SOURIAU 8N45 series connectors are designed to be used for various applications in the
reactor containment building
• Instrumentation
• Control
Field proven
Used in main power plants
SOURIAU 8N45 Series has been extensively used in more than 60 PWR plants
(all types including 900, 1
300, 1
450 MW reactors).
40 years experience
With 40 years of successful usage without any failure experienced in the field,
the 8N45 Series guarantees a safe and reliable connection in the reactor
containment building.
3
8N45 Series
Reactor Containment Certified Connectors
Receptacle & backshell details
8N45 Square flange receptacle
2 types of receptacle backshells are available:
• Simple backnut (represented & described hereunder)
• Straight with cable clamp and sealing gland (refer to plug description
on next page)
F
G
H
ØA
11
21
16,00
20,00
B
33,50
33,50
C
15,40
15,40
D
24,00
27,00
ØE
18,60
22,60
ØF
3,2
3,2
ØG
19,00
23,00
H
H
18,00
21,00
Contact layouts
8N45 11
8N45 21
3#16
3 Contacts Size 16
7 # 16
7 contacts size 16
4
8N45 Series
Reactor Containment Certified Connectors
Plug & backshell details
8N45 Plug details
2 types of plug backshells are available
• Simple backnut (refer to receptacle description on
previous page)
• Straight with cable clamp and sealing gland (described
hereunder)
Type *
1
1
21
21
51
21
A
80
80
80
ØB
22,50
22,50
26,50
Ø C min
7,50
10,50
10,50
Ø C max
9,50
1
2,00
1
2,00
D
23,00
23,00
23,00
* 2 types of straight backshells
with cable clamp and sealing
gland are available for shell
size 1 depending on cable
1
diameter
Ordering information
Product Series
Shell Size / Contact Layout
1
(3 contacts)
1
21
(7 contacts)
1: Receptacle
8: Plug
1:
Pin
5:
Socket
25:
Backnut
21*:
Straight backshell (Shell size 1 & 21)
1
51*:
Straight backshell (Shell size 1 only)
1
Blank:
K2 qualified product according to RCC-E code
NC:
Non-classified product
Blank:
Standard packaging
20:
Long duration packaging - without chlorine
8N45S
1
1
1
1
21
_
_
Shell Type
Contact Type
Backshell / Interface Type
Classification**
Packaging
* See definition table p.6 - ** K2 connectors are manufactured with specific traceability and delivered with End of Manufacturing Report, according to RCC-E code. NC connectors are
manufactured with standard traceability and delivered with Certificate of Conformity only.
I connected two computers with a serial cable. Since the two ends of the serial cable are one male and one female, one end of the serial cable was converted with a serial port conversion connector. (T...
The matrix button is connected to the P2 port LED light P1 port, but there is a problem with the program, the button does not respond, and then the L2 L3 L4 lights are not on, and the rest are on, wai...
[i=s] This post was last edited by chen468859 on 2017-10-25 16:46 [/i] Why can't I find the initialization of the GPIO port corresponding to USART1 and I2C? The project created with CubeMX has been up...
I recently DIYed a fuse. I have added 6.5V voltage to TDI according to the timing, but it just won't burn. Sending the command 0xaaaa from TDI, TDO always returns 0x5555. Not blown. All operations and...
1. Ferrite Magnetic Amplifier in Flyback Power Supply For a dual-output flyback power supply that provides real power at both outputs (5V 2A and 12V 3A, both can achieve ± 5% regulation), when the vo...
PV DC fuses are safety devices used to protect PV panels, inverters, and DC loads. To ensure their safety and reliability, they must be UL248 certified.
Before applying for UL248 certifi...[Details]
Nios II is a configurable 16-/32-bit RISC processor. Combined with a rich set of peripheral-specific instructions and hardware acceleration units, it provides a highly flexible and powerful SOPC sy...[Details]
Electric vehicles are currently gaining momentum, but this is just a facade. Fuel-powered vehicles remain unchallenged. While electric vehicles boast unique advantages in environmental emissions an...[Details]
In recent years, with the application of the IEC61850 standard and the development and deployment of optoelectronic transformers, the concept of digital substations has been put into practical use ...[Details]
With the rapid advancement of automation technology, collaboration between robots is no longer just science fiction. Imagine dozens of machines moving goods in a warehouse without interfering with ...[Details]
There are basically three causes of spontaneous combustion of electric vehicles: The first is that the battery components are punctured or suffer fatal damage due to a collision accident, and part ...[Details]
Learned the following information.
Customer product: industrial computer motherboard
Glue application area: CPU/BGA filling
Glue color requirements: black or t...[Details]
Through AI connection technology supported by Qualcomm X85 5G modem and RF and Qualcomm FastConnect 7900 mobile connection system, seamless switching can be achieved between cellular net...[Details]
Coal mines typically contain gas and coal dust. When gas and coal dust reach a certain concentration, they can cause explosions. Electrical equipment generates arcs during normal operation or durin...[Details]
In daily life, power transformers have different functions and uses due to different usage scenarios. The most common ones can be divided into: control transformers, isolation transformers, rectifi...[Details]
Bosch has released a new SoC series to support L2+ advanced driver assistance functions. The chip integrates high resolution and long-range detection capabilities, and has built-in support for neur...[Details]
On August 20, Geely announced its focus on "One Cockpit". Through a unified AI OS architecture, a unified AI Agent, and a unified user ID, it will achieve an All-in-One AI cockpit, create the first...[Details]
Preface
Low-voltage motors are widely used in nonferrous metallurgical plants. Their abnormal operation not only impacts normal production but can also threaten human life. Therefore, providin...[Details]
MQTT Ethernet I/O modules primarily collect I/O port information and transmit data over the network. In addition to being a TCP server, Ethernet I/O modules can also function as TCP clients. Furthe...[Details]
The driving mode is not unfamiliar to vehicles. According to the driving mode of the vehicle, there are front-wheel drive, rear-wheel drive and even four-wheel drive. Four-wheel drive is a major se...[Details]
Embedded System
京公网安备 11010802033920号
EEWORLD
