Configurable Four Output, Low Jitter Clock Generator for Automotive
Features
• AEC-Q100 Automotive Qualified
• Low RMS Phase Jitter: <1 ps (typ.)
• Complies with PCIe Gen1/2/3/4 Common Clock
Spec
• High Stability: ±25 ppm, ±50 ppm
• Wide Temperature Range:
- Automotive Grade 2: –40°C to +105°C
- Automotive Grade 3: –40°C to +85°C
• High Supply Noise Rejection: –50 dBc
• Four Format-Configurable Outputs:
- LVPECL, LVDS, HCSL, LVCMOS
• Available Pin-Selectable Frequency Table
- 1 Pin per Bank for 2 Frequency Sets
• Wide Frequency Range:
- 2.3 MHz – 460 MHz
• 20-Pin QFN Footprint (5.0 mm x 3.2 mm)
• Excellent Shock and Vibration Immunity
• High Reliability
- 20x better MTF than quartz-based devices
• Wide Supply Range of 2.25V to 3.6V
• Lead Free and RoHS-Compliant
General Description
The DSA400 is a four output clock generator. It utilizes
proven PureSilicon™ MEMS technology to provide
excellent jitter and stability while incorporating
additional device functionality.
The nominal frequencies of the outputs can be identical
or independently derived from common PLLs.
The four output DSA400 MEMS oscillators are
excellent choices for use as clock references in
automotive applications in which small size, low power
consumption, and long-term reliability are paramount.
The DSA400 is AEC-Q100 qualified.
Each output may be configured independently to
support a single-ended LVCMOS interface or a
differential interface. Differential options include
LVPECL, LVDS, or HCSL.
The DSA400 provides two independent select lines for
choosing between two sets of pre-configured
frequencies per bank. It also has two OE pins to allow
for enabling and disabling outputs.
The DSA400 is packaged in a 20-pin QFN (5 mm x
3.2 mm) and is available in extended commercial and
industrial temperature grades.
The DSA400 is a highly configurable device and is
factory programmed to meet the customer’s needs.
Microchip’s
ClockWorks Configurator
must be used to
choose the necessary options, create the final part
number, data sheet, and order samples.
Applications
•
•
•
•
Automotive Infotainment
Automotive ADAS
Autonomous Driving
In-Vehicle Network
Block Diagram
CONTROL
CIRCUITRY
BANK 1
MEMS
PLL
PLL
OE1
OE2
FSB1
FSB2
OUTPUT
CONTROL
AND
DIVIDERS
BANK 2
CLK2+
CLK2-
CLK3+
CLK3-
CLK0+
CLK0-
CLK1+
CLK1-
2020 Microchip Technology Inc.
DS20006356A-page 1
DSA400
1.0
ELECTRICAL CHARACTERISTICS
Absolute Maximum Ratings †
Supply Voltage .......................................................................................................................................... –0.3V to +4.0V
Input Voltage ...................................................................................................................................... –0.3V to V
For example, I have two modules, A, which caches two lines of data, samples data on the rising edge, then multiplies the two lines of data one by one, and then puts the multiplication result into a ne...
Hey guys, help me... The file exists, I just want to open it, but ZwCreateFile always returns 0xC000000D, which is STATUS_INVALID_PARAMETER. What is the problem? Thank you! ! The source code is as fol...
Generally speaking, Atria AT-START-F425 is very developer-friendly, has a very concise code structure, is easy to use, has rich sample codes, and is quite developer-friendly. I personally like it very...
My graduation project is to design the interaction between the virtools environment and the force feedback device. I encountered difficulties when using the virtools sdk to develop the force feedback ...
I want to make a bus filter driver to intercept the read and write operations of infrared devices and control their read and write. I added it to the upfilter of HKEY_LOCAL_MACHINE\SYSTEM\CurrentContr...
summaryThe MPI/PPI port of Siemens S7-200PLC is used on site, and Xingda Easy Control PPI-ETH-XD1.0 Ethernet communication module expands a network port for upper communication.Network diagram
1. Inst...
Reflow soldering is a critical process in electronics assembly production, and the cleanliness of the reflow oven has a direct impact on product quality. Dust and residue accumulation within the ov...[Details]
Abstract:
With the increasing complexity of smart vehicle electrical and electronic architectures, the full lifecycle management of vehicle electronic control components faces multiple challe...[Details]
As the number of cars increases, environmental pressures are also increasing. At this time, some people are saying that new energy vehicles are energy-efficient and environmentally friendly, and ar...[Details]
As time goes by, people are increasingly concerned about their own and their families' health. However, existing monitoring devices for individual vital signs have struggled to gain market share du...[Details]
On August 20th, Tiantai Robotics Co., Ltd., along with strategic partners including Shandong Future Robotics Technology Co., Ltd., Shandong Future Data Technology Co., Ltd., and Gangzai Robotics Gr...[Details]
Industrial computers with GPUs leverage powerful parallel processing to build deep learning models to analyze and respond to optical inputs. The systems develop an understanding of visual data to i...[Details]
On August 22, the Wall Street Journal reported on the 21st local time that the new US government does not plan to acquire equity in semiconductor wafer foundry giant TSMC and Micron, one of the thr...[Details]
Charging is an essential topic for electric vehicles. Batteries are a core component of new energy vehicles. So, what's the optimal charge level for electric vehicles? Based on current battery tech...[Details]
With the continuous development of ultrasonic technology, ultrasound has been widely used in fields such as inspection, cleaning, welding, and medical treatment, and has even found its way into tex...[Details]
Today, the voltage of electronic products continues to rise to 400V, 600V and even 1000V, so there are few electronic load models that can handle such high voltages. Many people consider connecting...[Details]
With rapid economic development, the types of pollution sources are increasing, especially in chemical and industrial zones and their surroundings. The patterns of pollution and the types of ecolog...[Details]
Electronics engineers all know that transient voltage suppression (TVS) diodes are used to protect ports, preventing damage to downstream circuits caused by transient voltage surges. In short, TVS ...[Details]
According to foreign media reports, German chipmaker Infineon has recently completed the acquisition of Marvell Technology's automotive Ethernet business for a total transaction amount of US$2.5 bi...[Details]
Recently, UBTECH announced its patent for "robot self-battery replacement structure, device and method".
The Qichacha patent abstract shows that the robot's self-battery replacement stru...[Details]
In the wave of electrification and intelligence in the automotive industry, the E/E architecture is transitioning from distributed to domain control and then to regional architecture.
Th...[Details]
FPGA/CPLD
京公网安备 11010802033920号
EEWORLD
