OTS-1L
Wideband Optical Link
DATASHEET | DECEMBER 2012
SATCOM
50 MHz to 3000 MHz Wideband Optical Link
Optiva Wideband fiber-optic links are optimized to perform
in the 50 to 3000 MHz frequency range providing transparent
signal transportation for satellite antenna applications. The
unique features of the OTS-1LT series include simple push
button peaking for optimum performance and our
patent-pending SmartGain™ Control, which ensures consistent
performance over varied signal conditions. As with all EMCORE optical prod-
ucts, the highest quality components and modern production techniques in-
sure that intra-facility links provide the highest performance as a cost-effective
Features
50 to 3000 MHz Optimized for IF, L and S band
Satellite Signals
Supports 20 km Links
30dB Tx Adjustable Gain Range
30 dB Rx Adjustable Gain Range
Peak Optimizer for Quick and Easy Setup
SmartGain™ for Enhanced AGC Performance
50 & 75 Ohm BNC or 50 Ohm SMA
Tx & Rx RF power Monitors via LED, SMA &
SNMP
LNB Power
SNMP Monitoring and Control
Optically-Isolated DFB Lasers Enable High
Dynamic Range Links
Fits in Optiva Enclosures, Which Support Daisy
Chain™ Video, Audio, and Data Links
16, 6, 2, & 1 Slot Enclosures Available
CE & CSA Certified, ROHS
alternative to coaxial cable. They provide much longer transmission distances
than copper cables, simplify network design, ease installation and even en-
hance immunity from EMI, RFI and lightning. These transmitters and receivers
take the high RF performance and diverse features of EMCORE’s Ortel technol-
ogy and combine them into a compact package compatible with the Optiva
family of OT-CC and OT-DTCR enclosures.
System Design
Optiva is a completely modular hot-swappable platform. Both 19” rack mount
and compact tabletop or wall-mountable enclosures are available. The 19”
rack-mount enclosure (Model OT-CC-16F-XXX) can support up to 16 insert
cards and provides a single power supply (Model PS-200), or a dual-redun-
dant, hot-swappable power supply option. Compact enclosures are avail-
able with 1, 2 or 6 slots. The one slot (OT-DTCR-1) and two slot (OT-DTCR-2)
enclosures both use an external power supply (PS-9012) and optionally have
a standard 2-pin DC power connector for more custom applications. Like the
OT-CC-16F the six-slot 1 RU enclosure (OT-CC-6) has hot swap redundant pow-
er supply. The Optiva family’s existing wide range of video, audio and data
transport products include a unique Daisy-Chain™ feature that multiplexes
multiple electrical inputs onto a single fiber, thus resulting in an extremely
capable, yet conveniently flexible, signal transport system.
© 2012 EMCORE Corporation
|
REV 2012.12
626-293-3400
satcom-sales@emcore.com
www.emcore.com
Information contained herein is deemed to be reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specifications at any time without notice.
OTS-1L
Wideband Optical Link
DATASHEET | DECEMBER 2012
SATCOM
Performance Highlights
Parameter
Link
Frequency Range
50 Ohm
75 Ohm
Optical Loss (C/N>10 dB, BW 36 MHz Carrier Level - 35 dBm)
Noise Figure (TG at max, 2150 MHz, 1 dBo loss)
Input IP3 (TG max, 2150 MHz, 1 dBo loss)
Spur Free Dynamic Range (1 dBo loss)
Air Temperature
TX
RF Input within SGC range
1
TX Gain (TG) at max, 1 GHz
2
TG Adjustment Range (reduction from max)
Wavelength
Input Return Loss
50-200 MHz
950-2150 MHz
50-3000 MHz
LNB Voltage
Current
Optical Power
DC Power
LNB Off
RX
RF Output (Tx at peak, 1 dBmo into Rx)
RX Gain (RG), at max, 1 GHz
2
RG Adjustment Range (reduction from max)
Output IP3 (2150 MHz)
Output 1dB compression (2150 MHz)
Receiver Sensitivity
Output Return Loss
50-200 MHz
950-2150 MHz
50-3000 MHz
DC Power
1. Wider RF inputs are acceptable, but will set the RF amp gain to its limit.
2. Link RF Gain
dB
= TG + RG – 2*FiberLoss
dBo
(assumes Rin = Rout)
3. dBmo & dBo indicate optical power & loss to minimize confusion with RF dBm & dB
Typical S21
Min
50
50
-
-
-
-
-10
-
0
30
1280
-
-
-
16
-
3
-
-
-
20
30
20
-
-
-
-
-
-
-
Typical
-
-
-23
13
2
108
-
0 to -35
8
-
-
10
15
19
17
-
5
12
-
-8 to -25
22
-
25
15
-20
10
15
10
12
-
Max
3000
2500
-
-
-
-
50
-
-
-
1340
-
-
-
19
350
6
-
350
-
-
-
-
-
-
-
-
-
-
250
Units
MHz
MHz
dBo
dB
dBm
dB/Hz
2/3
o
2 dB per division
3.0 GHz
C
dBm
dB (W/A)
dB
nm
.05 GHz
3.5 GHz
OTS-1L (TX & RX)
dB
V
mA
dBmo
V
mA
dBm
dB (A/W)
dB
dBm
dBm
dBmo
5.06 in.
128 mm
3 RU
TX
RX
dB
V
mA
Enclosure Options
© 2012 EMCORE Corporation
|
REV 2012.12
626-293-3400
satcom-sales@emcore.com
www.emcore.com
Information contained herein is deemed to be reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specifications at any time without notice.
OTS-1L
Wideband Optical Link
DATASHEET | DECEMBER 2012
SATCOM
Ordering Information
Product Code
OTS-1LT/S5-1303-SA-IC
OTS-1LT/B5-1303-SA-IC
OTS-1LT/B7-1303-SA-IC
OTS-1LR/S5-SA-IC
OTS-1LR/B5-SA-IC
OTS-1LR/B7-SA-IC
OPV-CTLR-IC
OTP-1ETR-A2/A2
OT-CC-16F-XXX
PS-200-XX
OT-CC-6-XX
OT-DTCR-1 / OT-DTCR-2
Specifications
Transmitter, 50-3000 MHz, SMA 50 ohm, 1310 nm, 3dBm (min), SC/APC
Transmitter, 50-3000 MHz, BNC 50 ohm, 1310 nm, 3dBm (min), SC/APC
Transmitter, 50-2500 MHz, BNC 75 ohm, 1310 nm, 3dBm (min), SC/APC
Receiver, 50-3000 MHz, SMA 50 ohm, SC/APC
Receiver, 50-3000 MHz, BNC 50 ohm, SC/APC
Receiver, 50-2500 MHz, BNC 75 ohm, SC/APC
NMS SNMP Controller Card & MIB for Optiva Family
Optical Tcvr, 1Ch, Ethernet, SM, Dual LC
Chassis, Rack Mount, 16 Slot, 3RU -- See OT-CC-16F data sheet for exact models
Power Supply, 12 Vdc, 100 to 240 Vac, 50/60 Hz -- See PS-200F data sheet for exact models
Chassis, Rack Mount, 6 Slot, 1RU -- See OT-CC-6 data sheet for exact models
Chassis, flange-mount, w/ Power Supply, 1 slot / 2 slot
Laser Safety
This product meets the appropriate standard in Title 21 of the Code of Federal Regulations (CFR). FDA/CDRH Class 1M laser
product. This device has been classified with the FDA/CDRH under accession number 0220191. All versions of this laser are
Class 1M laser product, tested according to IEC 60825-1:2007 / EN 60825-1:2007
An additional warning for Class 1M laser products. For diverging beams, this warning shall state that viewing the laser output
with certain optical instruments (for example: eye loupes, magnifiers, and microscopes) within a distance of 100 mm may pose
an eye hazard. For collimated beams, this warning shall state that viewing the laser output with certain instruments designed
for use at a distance (for example: telescopes and binoculars) may pose an eye hazard.
Wavelength = 1.3/1.5 μm.
Maximum power = 30 mW.
*Caution - Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.
*IEC is a registered trademark of the International Electrotechnical Commision.
© 2012 EMCORE Corporation
|
REV 2012.12
626-293-3400
satcom-sales@emcore.com
www.emcore.com
Information contained herein is deemed to be reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specifications at any time without notice.
京公网安备 11010802033920号
EEWORLD
