Note the following details of the code protection feature on Microchip devices:
•
•
•
Microchip products meet the specification contained in their particular Microchip Data Sheet.
Microchip believes that its family of products is one of the most secure families of its kind on the market today, when used in the
intended manner and under normal conditions.
There are dishonest and possibly illegal methods used to breach the code protection feature. All of these methods, to our
knowledge, require using the Microchip products in a manner outside the operating specifications contained in Microchip’s Data
Sheets. Most likely, the person doing so is engaged in theft of intellectual property.
Microchip is willing to work with the customer who is concerned about the integrity of their code.
Neither Microchip nor any other semiconductor manufacturer can guarantee the security of their code. Code protection does not
mean that we are guaranteeing the product as “unbreakable.”
•
•
Code protection is constantly evolving. We at Microchip are committed to continuously improving the code protection features of our
products. Attempts to break Microchip’s code protection feature may be a violation of the Digital Millennium Copyright Act. If such acts
allow unauthorized access to your software or other copyrighted work, you may have a right to sue for relief under that Act.
Information contained in this publication regarding device
applications and the like is provided only for your convenience
and may be superseded by updates. It is your responsibility to
ensure that your application meets with your specifications.
MICROCHIP MAKES NO REPRESENTATIONS OR
WARRANTIES OF ANY KIND WHETHER EXPRESS OR
IMPLIED, WRITTEN OR ORAL, STATUTORY OR
OTHERWISE, RELATED TO THE INFORMATION,
INCLUDING BUT NOT LIMITED TO ITS CONDITION,
QUALITY, PERFORMANCE, MERCHANTABILITY OR
FITNESS FOR PURPOSE. Microchip disclaims all liability
arising from this information and its use. Use of Microchip
devices in life support and/or safety applications is entirely at
the buyer’s risk, and the buyer agrees to defend, indemnify and
hold harmless Microchip from any and all damages, claims,
suits, or expenses resulting from such use. No licenses are
conveyed, implicitly or otherwise, under any Microchip
intellectual property rights.
Trademarks
The Microchip name and logo, the Microchip logo, dsPIC,
K
EE
L
OQ
, K
EE
L
OQ
logo, MPLAB, PIC, PICmicro, PICSTART,
rfPIC and UNI/O are registered trademarks of Microchip
Technology Incorporated in the U.S.A. and other countries.
FilterLab, Hampshire, HI-TECH C, Linear Active Thermistor,
MXDEV, MXLAB, SEEVAL and The Embedded Control
Solutions Company are registered trademarks of Microchip
Technology Incorporated in the U.S.A.
Analog-for-the-Digital Age, Application Maestro, CodeGuard,
dsPICDEM, dsPICDEM.net, dsPICworks, dsSPEAK, ECAN,
ECONOMONITOR, FanSense, HI-TIDE, In-Circuit Serial
Programming, ICSP, ICEPIC, Mindi, MiWi, MPASM, MPLAB
Certified logo, MPLIB, MPLINK, mTouch, nanoWatt XLP,
Omniscient Code Generation, PICC, PICC-18, PICkit,
PICDEM, PICDEM.net, PICtail, PIC
32
logo, REAL ICE, rfLAB,
Select Mode, Total Endurance, TSHARC, WiperLock and
ZENA are trademarks of Microchip Technology Incorporated
in the U.S.A. and other countries.
SQTP is a service mark of Microchip Technology Incorporated
in the U.S.A.
All other trademarks mentioned herein are property of their
respective companies.
© 2009, Microchip Technology Incorporated, Printed in the
U.S.A., All Rights Reserved.
Printed on recycled paper.
Microchip received ISO/TS-16949:2002 certification for its worldwide
headquarters, design and wafer fabrication facilities in Chandler and
Tempe, Arizona; Gresham, Oregon and design centers in California
and India. The Company’s quality system processes and procedures
are for its PIC
®
MCUs and dsPIC
®
DSCs, K
EE
L
OQ
®
code hopping
devices, Serial EEPROMs, microperipherals, nonvolatile memory and
analog products. In addition, Microchip’s quality system for the design
and manufacture of development systems is ISO 9001:2000 certified.
DS61143F-page ii
Preliminary
©
2009 Microchip Technology Inc.
PIC32MX3XX/4XX
High-Performance 80 MHz MIPS-Based 32-bit Flash Microcontroller
64/100-Pin General Purpose and USB
High-Performance 32-bit RISC CPU:
• MIPS32
®
M4K™ 32-bit Core with 5-Stage Pipeline
• 80 MHz Maximum Frequency
• 1.56 DMIPS/MHz (Dhrystone 2.1) Performance
at 0 Wait State Flash Access
• Single-Cycle Multiply and High-Performance
Divide Unit
• MIPS16e™ Mode for Up to 40% Smaller Code
Size
• Two Sets of 32 Core Register Files (32-bit) to
Reduce Interrupt Latency
• Prefetch Cache Module to Speed Execution from
Flash
Microcontroller Features:
• Operating Voltage Range of 2.3V to 3.6V
• 32K to 512K Flash Memory (plus an additional
12KB of Boot Flash)
• 8K to 32K SRAM Memory
• Pin-Compatible with Most PIC24/dsPIC
®
Devices
• Multiple Power Management Modes
• Multiple Interrupt Vectors with Individually
Programmable Priority
• Fail-Safe Clock Monitor Mode
• Configurable Watchdog Timer with On-Chip
Low-Power RC Oscillator for Reliable Operation
• Separate PLLs for CPU and USB Clocks
• Two I
2
C™ Modules
• Two UART Modules with:
- RS-232, RS-485 and LIN 1.2 support
- IrDA
®
with On-Chip Hardware Encoder and
Decoder
• Parallel Master and Slave Port (PMP/PSP) with
8-bit and 16-bit Data and Up to 16 Address Lines
• Hardware Real-Time Clock/Calendar (RTCC)
• Five 16-bit Timers/Counters (two 16-bit pairs com-
bine to create two 32-bit timers)
• Five Capture Inputs
• Five Compare/PWM Outputs
• Five External Interrupt Pins
• High-Speed I/O Pins Capable of Toggling at Up to
80 MHz
• High-Current Sink/Source (18 mA/18 mA) on
All I/O Pins
• Configurable Open-Drain Output on Digital I/O
Pins
Debug Features:
• Two Programming and Debugging Interfaces:
- 2-Wire Interface with Unintrusive Access and
Real-time Data Exchange with Application
- 4-wire MIPS
®
Standard Enhanced JTAG
interface
• Unintrusive Hardware-Based Instruction Trace
• IEEE Std 1149.2 Compatible (JTAG) Boundary
Scan
Peripheral Features:
• Atomic SET, CLEAR and INVERT Operation on
Select Peripheral Registers
• Up to 4-Channel Hardware DMA with Automatic
Data Size Detection
• USB 2.0 Compliant Full Speed Device and
On-The-Go (OTG) Controller
• USB has a Dedicated DMA Channel
• 10 MHz to 40 MHz Crystal Oscillator
• Internal 8 MHz and 32 kHz Oscillators
Analog Features:
• Up to 16-Channel 10-bit Analog-to-Digital
Converter:
- 1000 ksps Conversion Rate
- Conversion Available During Sleep, Idle
• Two Analog Comparators
• 5V Tolerant Input Pins (digital pins only)
©
2009 Microchip Technology Inc.
Preliminary
DS61143F-page 1
Power technology
京公网安备 11010802033920号
EEWORLD
