The EMCORE PONA 2100 Series Erbium Doped Fiber Amplifier (EDFA) is an
ideal building block for OEM system integrators. The family of PONA 2100 series
EDFA’s is designed to meet the most demanding noise performance requirements
of CATV applications, and performs all the functions required of an optical
amplifier for system integration. PONA 2100 series EDFA’s provide optical
isolation on the input and output of the gain block for stable, low noise operation.
The input and output optical signal power levels are detected for monitoring and
control. The input optical signal is amplified with active gain control for a constant
output power level, or with active output power control for constant gain mode.
The PONA 2100 series EDFA’s also provide monitors and associated alarms for
all vital characteristics. The optical output of the PONA 2100 series EDFA’s can
be split into multiple ports by an optional external splitter.
Applications
High Performance Supertrunking Links
High Power Distribution Networks
Redundanct Ring Architectures
FTTx Networks.
Features
Full Functionality 1 RU EDFA
Low Noise Figure (Typ < 5.5 dB)
Total Input Power Range: -10 dBm to
+12 dBM
+14 dBm to +30 dBm Output Power
Optional Internal Optical Power Splitters
Standard RS-232 Communications
Standard SNMP Communication
(coming soon)
Key Lock Switch
Standard and Optional Gain Flatness
(1530 nm – 1562 nm)
VFD Panel Status Indicator
Low Electrical Power Consumption
Input/Output Isolation >40/40 dB
Polarization Dependant Gain < 0.1 dB
Polarization Mode Dispersion < 0.5 ps
General and Mechanical Specifications
Property
Operating Wavelength
Operating Case Temperature
Storage Temperature
Operating Humidity
Voltage Supply Range
Optical Connectors
Dimensions in Inches
Requirement
1532 ~ 1565 nm
1545 ~ 1565 nm
-10C to 55C
-40C to 85C
20% to 85%
100 VAC to 240 VAC 50/60 Hz
-36 to –60 V DC
SC/APC; SC/UPC; FC/APC;
FC/UPC; E2000/APC
19.0”W x 14.76”D x 1.72”H
Comments
PONA 2114 – PONA2127
PONA 2130
Standard
Standard
Non-condensing
Standard
Optional
User Specified
19” Rack Mounted, 1U
| REV 2012.01
Information contained herein is deemed reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specification at any time without notice.
PONA 2100 Series
DATASHEET | JANUARY 2012
FIBER OPTICS
Optical/Electrical Characteristics
1
Property
Operating Input Power
Operating Input Power
Output Power
Noise Figure
Static Gain Flatness
Dynamic Gain Flatness
Output Power Stability
Power Consumption
(steady state regime)
Symbol
(Units)
Pin (dBm)
Pin (dBm)
Po (dBm)
NF (dB)
GF (dB)
(dB)
(dB)
Psys (W)
Limit
2114
Max
Min
+12
-10
14.0
+/-.25
Typ/Ma
x
Max
Max
Max
Max
4.5/5.0
+/-0.5
+/-1
+/- 0.2
5
PONA Models
2117
+12
-10
17.0
+/- .25
4.5/5.0
+/-0.5
+/-1.25
+/- 0.2
7
Comments
2124
+12
-10
24.0
+/- .25
2120
+12
-10
20.0
+/- .25
4.5/5.0
+/-0.5
+/-1.5
+/- 0.2
9
2122
+12
-10
22.0
+/- .25
4.5/5.0
+/-0.5
+/-2.0
+/- 0.2
12
2127
+12
-10
27.0
+/- .25
5.0/5.5
+/-0.5
+/-2.0
+/- 0.2
35
2130
+12
-10
30.0
+/- .25
5.5/6.0
(Note 7)
(Note 7)
+/- 0.2
40
Typical
(May vary for
some models)
(Note 2)
(Notes 3, 8)
(Note 4)
(Notes 5, 8)
(Note 6)
50 C Case
o
5.0/5.5
+/-0.5
+/-2.0
+/- 0.2
20
Notes
:
1. Unless stated otherwise, all specifications apply over the full operating temperature and humidity ranges
0 dBm (Measuring with 1 input optical signal with Pin
≈
0 dBm
and
≈
1550 nm is also possible. (Low Noise Figure options with NF
≤
4.0/4.5 dB are available for some models)
4. Measured with a swept Probe Signal (Pp), where Pp
≈
0 dBm @ 25C
5. Measured with a swept Probe Signal (Pp), and a fixed Tone Signal (Pt) @ ~ 1550 nm; (Pt
≈
Pp+20 dB; Pt + Pp
≈
0 dBm) @ 25C;
Gain Flattened Options with
ΔG ≤
+/-1.0dB are available (for some models)
6. Over polarization and temperature
7. Static and Dynamic Gain Flatness for PONA 2130 can be defined for 1545 nm
≤
≤
1562 nm and by special request only.
8. Specific NF and
ΔG
can be guaranteed at a single specified Input Optical Power Level (Pin = Pt + Pp) equal or different from 0 dBm.
(Please contact your Sales Representative for more information)
| REV 2012.01
Information contained herein is deemed reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specification at any time without notice.
PONA 2100 Series
DATASHEET | JANUARY 2012
FIBER OPTICS
Outline Drawing
AC versions shown below with 8-port option
DC versions shown below with 8-port option
Compliance Information
89/336/EEC
73/23/EEC
EN 50083-2, (2001)
EN 55013
EN 61000-3-2
EN 55020
EN 61000-4-6
EN 61000-4-3
EN 61000-4-2
EN 61000-4-4
EN 60950
EN 60825-1
EN 60825-2
CDRH
Fit Rate:
Electromagnetic Compatibility Directive, amended by 92/31/EEC & 93/68/EEC
Low Voltage Directive, amended by 93/68/EEC
Cable networks for TV signals, sounds and interactive services, Part 2
Electromagnetic Compatibility for equipment.
Mains Conducted Emissions
Mains Frequency and its Harmonics, Conducted Emissions
Radiation from Active Equipment, Radiated Immunity
Immunity of Active Equipment, Radiated Immunity
Immunity of Active Equipment, Radiated Immunity
Electrostatic Discharge Immunity
Electrical Fast Transient / Burst Immunity
Low Voltage Directives
Laser Safety Requirement
Laser Safety Requirement
Laser Safety Requirement
90% level of confidence < 1700 @ 30C (PONA 2130)
| REV 2012.01
Information contained herein is deemed reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specification at any time without notice.
PONA 2100 Series
DATASHEET | JANUARY 2012
FIBER OPTICS
Ordering Information
PONA 21
Optical Output
Power
14 -
14 dBm
17 -
17 dBm
20 -
20 dBm
22 -
22 dBm
24 -
24 dBm
27 -
27 dBm
30 -
30 dBm
-
-
Input Voltage
-
-
*
Connector
GFF/ NF Options
00 -
Standard
01 –
Gain Flattened Option
02
- Low NF Option
03
– Gain Flattened AND Low
NF Option
Output
Ports
1
2
4
8
16
AC
– 90-260V 50/60 Hz
DC
– 48 V
2DC –
Redundant 48 V
SC –
SC/APC (Default Option)
FC
- FC/APC (Default Option)
EC
- E2000/APC
TC
- SC/UPC
GC
- FC/UPC
Notes:
1.
For ordering PONA
preamplifiers
please contact your Sales Representative
2. Only some models can be order with Gain Flattened and/or Low NF options. (-01, -02, and –03 suffixes).
Please contact your
Emcore Sales Representative for details
Laser Safety Information
This product meets the applicable requirements of 21 CFR 1010 & 1040 and is classified as a Class IV laser product based
on the maximum optical output power shown below. During use as intended, the laser energy is fully contained within the
fiber network such that there is no accessible laser radiation and would meet the requirements for a Class I laser product.
The laser product report has been submitted to the CDRH and the accession number is expected by October 2006.
Wavelength = 1530 ~ 1561 nm (dependant on input source)
Maximum Output Power = 1.0 W (single output, 30 dBm model)
| REV 2012.01
Information contained herein is deemed reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specification at any time without notice.
The legendary price is $30 per piece, and shipping is free when you spend $80.Universal Dev Board Accepts MSP430, C2000, or Stellaris MCU Chipssample of a new development board arrived from SchmartBoa...
How can I use the instruction to read the CPU running clock number of TI-6416? I want to let the DSP wait for a while before reading the next interface command. I am in a hurry to use it. Can anyone h...
Improved the OLED driver to support multiple fonts. Currently supports:6x8
8x16
12x24
16x32Drivers:
[hide] https://github.com/micropython-Chinese-Community/mpy-lib/tree/master/LED/OLED_I2C_ASC [/hide]...
1. Introduction
RFID (radio frequency identification) is a non-contact automatic identification technology that emerged in the 1990s. It uses the characteristics of radio frequency signal prop...[Details]
1. Introduction
Since the 1980s, with the continuous development of automotive electronic technology, there are more and more electronic control units in automobiles, such as electronic fuel i...[Details]
Analog engineers have traditionally struggled with complexity when designing power supplies that required multiple outputs, dynamic load sharing, hot-swap, or extensive fault-handling capabilities....[Details]
The reason for the light decay of white LEDs: the decline of phosphor performance
So far, the rapid decline of the luminous performance of white light LEDs, especially low-power white light LE...[Details]
Electronic systems are located at different points on the automotive power bus and therefore often need to operate under very stringent power requirements. These include load dump, cold crank, very lo...[Details]
1. Overview
The Virtual CAN Interface (VCI) function library is an application program interface specifically provided for the use of ZLGCAN devices on PCs. The functions in the library ar...[Details]
1. Project Introduction
Shandong Dezhou Xingtai Paper Co., Ltd. is a newly built high-end paperboard production enterprise with domestic leading level established by Shandong Zhaodongfang Pape...[Details]
1. Introduction
Testing the temperature of steel billets before rolling is an important measure to ensure the quality of steel. Traditional manual testing is difficult to ensure product qu...[Details]
introduction
MEMS is a high-tech that has flourished on the basis of integrated circuit production technology and dedicated micro-electromechanical processing methods. Pressure sensors develop...[Details]
According to the Industrial Technology Research Institute of Taiwan, due to factors such as the oil crisis and global warming, the issues of energy conservation and environmental protection have at...[Details]
0 Introduction
There are many types of sensors, and the working principles, measurement targets and measurement environments of different types of sensors vary greatly. The corresponding detection s...[Details]
A few days ago, I bought an 8LED flashlight in the market (the flashlight uses No. 5 batteries). Because I had other things to do, I didn't pay attention when purchasing it. When I got home and use...[Details]
The demand for improved healthcare environments is endless, so medical imaging equipment with higher resolution is needed to better observe the human body. High resolution brings problems with sign...[Details]
Battery clamps, commonly known as battery connectors, come in two sizes depending on the thickness of the battery terminals. One is the battery clamp used on thick terminals, with a positive termin...[Details]
Electrostatic coupling and interference occur when a charged object is close to the input of the circuit being measured. At low impedance, the effects of interference are not noticeable because th...[Details]
Microcontroller MCU
京公网安备 11010802033920号
EEWORLD
