Figure 7. Standard PECL Output Con guration Figure 8. Single Resistor Termination Scheme
Resistor values are typically 140 ohms for
3.3V operation.
Resistor values are typically 84 ohms for 2.5V
operation.
The VCC6 incorporates a standard PECL output scheme, which are un-terminated emitters as shown in Figure 7. There are numerous application notes on
terminating and interfacing PECL logic and the two most common methods are a single resistor to ground, Figure 8, and a pull-up/pull-down scheme as
shown in Figure 9. An AC coupling capacitor is optional, depending on the application and the input logic requirements of the next stage.
LVDS Application Diagrams
V
CC
LVDS
Driver
100
LVDS
Receiver
LVDS
Driver
100
Receiver
OUT+
OUT-
Figure 10 Standard LVDS
Output Con guration
Figure 11. LVDS to LVDS Connection, Internal 100ohm
Figure 12. LVDS to LVDS Connection
Some LVDS structures have an internal 100 ohm resistor on the
External 100ohm and AC blocking caps
input and do not need additional components.
Some input structures may not have an internal 100 ohm
resistor on the input and will need an external 100ohm
resistor for impedance matching. Also, the input may have
an internal DC bias which may not be compatible with
LVDS levels, AC blocking capacitors can be used.
One of the most important considerations is terminating the Output and Complementary Outputs equally. An unused output should not be left un-termi-
nated, and if one of the two outputs is left open it will result in excessive jitter on both. PC board layout must take this and 50 ohm impedance matching
into account. Load matching and power supply noise are the main contributors to jitter related problems.
I want to make a data acquisition card for collecting voltage signals, but I don't know how to process the AD front end. Please help me. There are two types of measured signals: 1, analog signal of 0-...
[font=微软雅黑][size=4]In 2017, Keysight Technologies (formerly Agilent's Test and Measurement Division) contributed many technical tutorials. We have compiled some of the key points here and hope they wi...
Chip manufacturers such as Qualcomm, Intel, Nvidia, and NXP are eager to introduce their communication technology and experience in the mobile field into the automotive field. [/size][/font][/color][/...
In recent years, portable audio players (commonly known as MP3) have become the brightest spot in the consumer electronics market. At the same time, competition among chip suppliers has become increas...
DSP and ARM Processors
京公网安备 11010802033920号
EEWORLD
