Stable and highly reliable transmission parameters
Waterblocking technology
Allows efficient and craft-friendly cable preparation in
outdoor or indoor/outdoor applications
Extra tough double jackets
Ideal for harsh environments
Listed OFN-LS and CSA FT4-ST1, IEC 60332-3, IEC
61034 and IEC 60754-2
Meets burn test criteria
Listed MSHA 30 CFR Pt. 7-K
Mining Safety and Health Administration approved
Corning Cable Systems Dielectric, Low-Temperature,
Tray-Rated, Mining and Petrochemical Fiber Optic
Cables are designed for indoor and outdoor use in mining
and petrochemical backbones (aerial and duct) and hori-
zontal intrabuilding and tunnel backbones where limited-
smoke and zero-halogen requirements exist.
Available in 12 different jacket colors that enables easy
visual identification and segregation of cables while still
providing all the required environmental protection of an
indoor/outdoor cable jacket.
The SZ-stranded, loose tube design isolates fibers from
installation and environmental rigors and allows for easy
midspan access. The design also provides high-fiber
density within a given cable diameter, allowing flexibility
to suit many system designs.
The specially formulated black, UV-resistant, flame-
retardant LSZH inner and outer jacket complies with
IEEE-383 flame test. These extra-tough double jackets
resist hazards found in mines and petrochemical com-
plexes, making this cable ideal for any harsh environment
requiring a more robust cable and suitable for direct buri-
al applications. All-dielectric construction provides tensile
strength and eliminates grounding concerns.
Standards
Approval and Listings
National Electrical Code
®
(NEC
®
) OFN-LS, CSA OFN
FT4-ST1, IEEE 383 Flame
Test, IEC 60332-3, IEC
60754-2, IEC 61034
Outdoor aerial and duct;
indoor general purpose
horizontal according to CSA
C22.2
ANSI/ICEA S-104-696
Common Installations
Design and Test Criteria
Dielectric Strength
Members
Water-Swellable
Tape
Water-Swellable
Tape
Dielectric Central
Element
Flame-Retardant
Tape
Fiber
Ripcord
Buffer
Tube
Filling Element
Water-Swellable
Tape
FRNC / LSZH
Inner Jacket
Mining and Petrochemical Cables, 12-Fibers
Mining and Petrochemical Cables, 12-Fibers
FRNC / LSZH
Outer Jacket
Family Spec Sheet 0020_NAFTA_AEN
Page 1 | Revision date 2013-01-28
Mining and Petrochemical Fiber Optic
Cables
Dielectric Strength
Members
Water-Swellable
Tape
Water-Swellable
Tape
Dielectric Central
Element
Flame-Retardant
Tape
Fiber
Ripcord
Buffer
Tube
Filling Element
Water-Swellable
Tape
FRNC / LSZH
Inner Jacket
FRNC / LSZH
Outer Jacket
Mining and Petrochemical Cables, 60-Fibers
False
Mining and Petrochemical Cables, 60-Fibers
Specifications
Temperature Range
Storage
Installation
Operation
-50 °C to 75 °C (-58 °F to 167 °F)
-30 °C to 60 °C (-22 °F to 140 °F)
-50 °C to 75 °C (-58 °F to 167 °F)
* Corning Cable Systems recommends storing indoor/outdoor cable in a proper temperature environment prior to installation to allow the cable temperature to
meet installation temperature range specifications for best installation results.
Mechanical Characteristics Cable
Max. Tensile Strengths, Short-Term
Max. Tensile Strengths, Long-Term
Fiber
Count
12 - 72
96
144
Product Type
Nominal Outer Diameter
4500 N (1000 lbf)
1500 N (333 lbf)
Min. Bend
Radius
Installation
264 mm
(10.4 in)
306 mm
(12 in)
360 mm
(14.2 in)
Min. Bend
Radius
Operation
176 mm
(6.9 in)
204 mm
(8 in)
240 mm
(9.4 in)
Weight
Buffer Tube
Diameter
2.5 mm
(0.1 in)
2.5 mm
(0.1 in)
2.5 mm
(0.1 in)
Dielectric
Dielectric
Dielectric
17.6 mm
(0.69 in)
20.4 mm
(0.8 in)
24 mm
(0.94 in)
299 kg/km
(201 lb/1000 ft)
400 kg/km
(269 lb/1000 ft)
529 kg/km
(356 lb/1000 ft)
Family Spec Sheet 0020_NAFTA_AEN
Page 2 | Revision date 2013-01-28
Mining and Petrochemical Fiber Optic
Cables
Fiber
Count
192 - 216
288
Product Type
Nominal Outer Diameter
Min. Bend
Radius
Installation
350 mm
(13.8 in)
395 mm
(15.5 in)
Min. Bend
Radius
Operation
233 mm
(9.2 in)
263 mm
(10.4 in)
Weight
Buffer Tube
Diameter
2.5 mm
(0.1 in)
2.5 mm
(0.1 in)
Dielectric
Dielectric
23.3 mm
(0.92 in)
26.3 mm 1.04 mm
472 kg/km
(317 lb/1000 ft)
602 kg/km
(405 lb/1000 ft)
Chemical Resistance
Chemical
ASTM #2 Oil
De-Icing Fluid
Diesel Fuel, MIL-F 16884
Hydraulic Fuel, MIL-H 5606
Hydraulic Fuel, MIL-H 16762
Lubricating Oil, MIL-L23699
Vegetation Killer
Exposure Time
4h
24 h
24 h
24 h
24 h
24 h
168 h
Exposure Temperature
158 °F
122 °F
95 °F
120 °F
120 °F
120 °F
122 °F
Chemical Characteristics
RoHS
Free of hazardous substances according to RoHS 2002/95/
EG
Family Spec Sheet 0020_NAFTA_AEN
Page 3 | Revision date 2013-01-28
Mining and Petrochemical Fiber Optic
Cables
Transmission Performance
Fiber Type
Fiber Core Diameter (µm)
Fiber Category
Fiber Code
Performance Option Code
Wavelengths (nm)
Maximum Attenuation (dB/km)
Serial 1 Gigabit Ethernet (m)
Serial 10 Gigabit Ethernet (m)
Min. Overfilled Launch (OFL)
Bandwidth (MHz*km)
Minimum Effective Modal
Bandwidth (EMB) (MHz*km)
Notes:
Multimode
62.5
OM1
K
30
850 / 1300
3.4 / 1.0
300 / 550
33 / -
200 / 500
220 / -
Multimode
50
OM2
T
31
850 / 1300
3.0 / 1.0
750 / 600
150 / -
700 / 500
950 / -
Multimode
50
OM3
T
80
850 / 1300
3.0 / 1.0
1000 / 600
300 / -
1500 / 500
2000 / -
Multimode
50
OM4
T
90
850 / 1300
3.0 / 1.0
1100 / 600
550 / -
3500 / 500
4700 / -
Multimode
50
OM4
Extended
Distance
T
91
850 / 1300
3.0 / 1.0
1100 / 600
600 / -
3500 / 500
5350 / -
Single-mode
8.2
OS2
E
01
1310 / 1383
/ 1550
0.4 / 0.4 /
0.3
5000 / - / -
10000 / - /
40000
1)
Improved attenuation and bandwidth options available.
2)
Bend-insensitive single-mode fibers available on request.
3)
Contact a Corning Cable Systems Customer Care Representative for additional information.
4)
50 μm multimode fiber macrobend loss ≤ 0.2 dB at 850 nm for two turns around 7.5 mm radius mandrel.
Family Spec Sheet 0020_NAFTA_AEN
Page 4 | Revision date 2013-01-28
Mining and Petrochemical Fiber Optic
Cables
Ordering Information |
Contact Customer Care at 1-800-743-2671 for other options.
This cable is available in 12 different jacket colors: blue, orange, green, brown, slate, white, red, black, yellow, violet, rose and aqua. Black is the standard jacket
color using the part number configurator above. Contact Customer Care at 1-800-743-2675 to order other color options.
Corning Cable Systems LLC • PO Box 489 • Hickory, NC 28603-0489 USA
[b]Table of Contents:[/b] Preface Illustrated History of the Development of Electricity 1. Study Guide for Electronic Circuit Components The Behavior of Free Electrons and Holes in Semiconductors The ...
[font=微软雅黑][size=4]In recent years, the Internet of Things (IoT) has been developing rapidly. The world has seen its huge market prospects, and semiconductor manufacturers are also planning their own ...
Today's computer peripherals are pursuing high speed and high versatility. In order to meet user needs, seven companies led by Intel launched the USB (Universal Serial Bus) bus protocol in 1994, wh...[Details]
Traditional broadcasting systems generally need to be operated manually at a fixed time, and can only realize one-way broadcasting with few functions. Traditional bell ringing equipment has a singl...[Details]
1. Circuit composition
The whole circuit consists of two parts:
1. Power saving control circuit
As shown in the figure below. Including delay circuit and drive circuit.
(1) Delay ci...[Details]
1. Introduction
With the growth of parking demand, the scale of parking lots is becoming larger and larger. A lot of research has been done on intelligent parking lots in China, but most of th...[Details]
Analog engineers have traditionally struggled with complexity when designing power supplies that required multiple outputs, dynamic load sharing, hot-swap, or extensive fault-handling capabilities....[Details]
Converged processors meet scalability requirements
In current embedded system design, solutions based on MCU, DSP, FPGA and ASIC account for more than 90% of the market share. These solutions ...[Details]
Abstract: In order to generate a stable excitation signal, the design of a digital frequency synthesizer is implemented on FPGA using Verilog hardware language. The design includes accumulator, wav...[Details]
The reason for the light decay of white LEDs: the decline of phosphor performance
So far, the rapid decline of the luminous performance of white light LEDs, especially low-power white light LE...[Details]
The solidification and modularization of intelligent video analysis algorithms are the current trends in the application of intelligent video analysis technology. It perfectly combines intelligent ...[Details]
With the rapid development of urban economy, elevators are increasingly used as a vertical transportation tool. However, elevator fault detection and maintenance, especially the role of elevator remot...[Details]
The data collector of the automatic weather station is generally designed based on a single-chip microcomputer or a PC/104 bus controller. It has the characteristics of good compatibility with PC, low...[Details]
1 Introduction
PROFIBUS is an international, open, and manufacturer-independent fieldbus standard. It is widely used in manufacturing automation, process industry automation, and automatio...[Details]
LED is the abbreviation of light emitting diode, which is an electric light source made of semiconductor technology. The core part of LED is a chip composed of P-type semiconductor and N-type semi...[Details]
This controller uses PIC16C54 single-chip microcomputer as the controller, and it is very easy to use: just connect a telephone line to the loudspeaker through the controller, and you can rem...[Details]
The concept of state machine
State machine is an important concept in software programming. More important than this concept is its flexible application. In a clear and efficient program, ther...[Details]
Analog electronics
京公网安备 11010802033920号
EEWORLD
