18900 Panduit Drive
Tinley Park, IL 60487
Customer Service: 800-777-3300
TDS:
Effective Date:
Revision:
GMY6
27MAY2015
9
Technical Data Sheet
Laser/Inkjet Printable Polyester Film
This specification is intended to outline the physical and chemical properties of
P
ANDUIT
’s pressure sensitive laser and inkjet
printable polyester material and include the following part numbers and printable material identifiers:
Part Number Prefixes
LJSL*Y
PLL
Y*J
Printable Material Suffixes
PRODUCT SPECIFICATIONS:
Description:
Material is RoHS compliant (European Union directive 2002/95/EC).
Material is top coated to provide a laser/inkjet printable surface. This
material is halogen free.
This material is recommended for laser and inkjet printing.
Acrylic based, pressure sensitive permanent adhesive.
Clear with white/colored print-on area
2.0 +/- 0.3 mils (substrate and adhesive)
-65°F to 225°F (-54°C to 107°C)
50°F (10°C)
Store at 70°F (21°C) and 50% Relative Humidity.
Print Methods:
Adhesive:
Standard Colors:
Thickness:
Service Temperature Range:
Minimum Application Temperature:
Storage Conditions:
PROPERTIES:
Peel Adhesion to Stainless Steel:
Shear Adhesion:
Tensile Strength:
Elongation:
Elevated Temperature Exposure:
Tack:
Immersion Resistance:
PERFORMANCE:
35 oz/in width (PSTC-101, 15 min. dwell)
24+ hours (PSTC-107, Procedure A)
MD 56lbs/ inch width +/- 15% (ASTM D882)
TD 72 lbs/inch width +/- 15% (ASTM D882)
MD 160% +/- 15% (ASTM D882)
TD 120% +/- 15% (ASTM D882)
After 8 hours at 275°F (135°C) there was no deterioration of the substrate
470 g/cm
2
(ASTM D-2979-71, 1 sec dwell)
Printed samples were applied to stainless steel panels and immersed in “Isopar
‘L’ and Isopar ‘M’ solutions to determine if the printing would smear or if the
adhesive would degrade.
Immersion Time
Visual Changes
10 minutes
None
30 minutes
None
60 minutes
None
24 hours
None
*3000 hours no change observed (ASTM G154)
UV Resistance:
*3000 hours equates to 5 years of assimilated
Outdoor UV exposure.
Page 1 of 2
2005
PANDUIT
Corp
TDS: GMY6
18900 Panduit Drive
Tinley Park, IL 60487
Customer Service: 800-777-3300
TDS:
Effective Date:
Revision:
GMY6
27MAY2015
9
Technical Data Sheet
Air Handling Spaces:
Meets the outgassing requirements of ASTM E-595 suitable for use in air
handling spaces.
CHEMICAL/SOLVENT RESISTANCE:
Samples were laser and inkjet printed. These samples were laminated to flat steel panels and were also wrapped around a 1/12”
OD wire. The test was conducted at room temperature after 24 hour dwell. The samples were then immersed in the specified
reagents for 5 immersions using the following cycle: a 10 minute immersion time followed by a 30 minute recovery time. After
the fifth immersion, the samples were conditioned for 24 hours before testing. Percent retention of performance for samples on
flat steel panels was based on a 48 hour adhesion value of 50 oz/inch width.
Chemical Reagent
Distilled Water
Mineral Spirits
Toluene
Isopropyl alcohol
Methanol
Acetone
Methyl Ethyl Ketone
1,1,1 Trichloroethane
Freon TF
Super Agitene
Jet A Fuel
Arco Truslide 68
SAE 30 Motor Oil
10% Nitric Acid
PSTC:
ASTM:
Visual Observation
No effect
No effect
Slight adhesive bleed
No effect
No effect
Slight adhesive bleed
Slight adhesive bleed
No effect
No effect
No effect
No effect
No effect
No effect
No effect
Print
Laser
Inkjet
No effect No effect
No effect No effect
No effect No effect
No effect No effect
No effect No effect
No effect No effect
No effect No effect
No effect No effect
No effect No effect
No effect No effect
No effect No effect
No effect No effect
No effect No effect
No effect No effect
Percent Retention of
Performance
98%
96%
91%
96%
91%
87%
87%
94%
87%
90%
90%
89%
102%
92%
Pressure Sensitive Tape Council (U.S.A.)
American Society for Testing and Materials (U.S.A.)
Approval
UL Recognized: UL969
LIMITED WARRANTY
File Number: MH14979 (white print-on area labels)
All
P
ANDUIT
Identification Solution Products (except for Software programs) are warranted to be free from
defects in material and workmanship at the time of sale but our obligation under this warranty is limited to
replacement of the product proved to be defective within 6 months from the date of sale, or in the case of
printers, within 90 days from the date of sale. This warranty is void if the products or printers are modified,
altered or misused in any way. Use of
P
ANDUIT
printers with any product other than the specified
P
ANDUIT
products for which the printer was designed constitutes misuse. Before using, the user shall determine the
suitability of the product for its intended use and user assumes all risk and liability whatsoever in connection
therewith. The foregoing may not be altered except by an agreement signed by officers or seller and
manufacturer.
NEITHER
P
ANDUIT
OR SELLER SHALL BE LIABLE FOR ANY OTHER INJURY, LOSS OR DAMAGE,
WHETHER DIRECT OR CONSEQUENTIAL, ARISING OUT OF THE USE OF, OR THE INABILITY TO USE
THE PRODUCT OR THE PRINTER.
THIS WARRANTY IS MADE IN LIEU OF AND EXCLUDES ALL OTHER WARRANTIES, EXPRESS OR
IMPLIED. THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS OF PARTICULAR USE
ARE SPECIFICALLY EXCLUDED.
The information contained in this literature is based on our experience to date and is believed to be
reliable. It is intended as a guide or use by persons having technical skill at their own discretion and
risk. We do not guarantee favorable results or assume any liability in connection with its use.
Dimensions contained herein are for reference purposes only. This publication is not to be taken as a
license to operate under, or a recommendation to infringe any existing patents. This supersedes and
voids all previous literature, etc.
Page 2 of 2
2005
PANDUIT
Corp
TDS: GMY6
MCU
京公网安备 11010802033920号
EEWORLD
