BU-65863G8-400W datasheet, PDF

Datasheet> All Categories > The embedded processor and controller> Microcontrollers and processors> BU-65863G8-400W

BU-65863G8-400W: DescriptionMil-Std-1553 Controller, 2 Channel(s), 0.125MBps, CMOS, CQFP80, 0.890 X 0.890 INCH, 0.130 INCH HEIGHT, CERAMIC, QFP-80; CategoryThe embedded processor and controller Microcontrollers and processors; File Size2MB，77 Pages; ManufacturerData Device Corporation

Download Datasheet Parametric View All

BU-65863G8-400W Overview

Mil-Std-1553 Controller, 2 Channel(s), 0.125MBps, CMOS, CQFP80, 0.890 X 0.890 INCH, 0.130 INCH HEIGHT, CERAMIC, QFP-80

BU-65863G8-400W Parametric

Parameter Name	Attribute value
Objectid	1334476299
package instruction	QFP,
Reach Compliance Code	compliant
Other features	SEATED HT-CALCULATED
Address bus width	32
boundary scan	YES
Bus compatibility	PCI
letter of agreement	MIL-STD-1553A; MIL-STD-1553B; STANAG-3838
Data encoding/decoding methods	BIPH-LEVEL(MANCHESTER)
Maximum data transfer rate	0.125 MBps
External data bus width	32
JESD-30 code	S-CQFP-G80
length	22.35 mm
low power mode	YES
Number of serial I/Os	2
Number of terminals	80
Maximum operating temperature	125 °C
Minimum operating temperature	-55 °C
Package body material	CERAMIC, METAL-SEALED COFIRED
encapsulated code	QFP
Package shape	SQUARE
Package form	FLATPACK
Filter level	MIL-PRF-38534
Maximum seat height	3.708 mm
Maximum supply voltage	3.45 V
Minimum supply voltage	3.15 V
Nominal supply voltage	3.3 V
surface mount	YES
technology	CMOS
Temperature level	MILITARY
Terminal form	GULL WING
Terminal pitch	1.016 mm
Terminal location	QUAD
width	22.35 mm
uPs/uCs/peripheral integrated circuit type	SERIAL IO/COMMUNICATION CONTROLLER, MIL-STD-1553

Preview

Download Datasheet

View All

BU-65743/65843/65863/65864

PCI MINI-ACE

MARK3 AND

Make sure the next

Card you purchase

has...

PCI MICRO-ACE

*-TE

FEATURES

•

32-Bit/33MHz, 3.3Volt, PCI Target

Interface

•

Fully Integrated 1553A/B Notice 2,

1760, McAir, STANAG 3838 Interface

Terminal

•

All +3.3V Operation or +3.3V Logic

and +5V Transceivers

•

0.88 inch square, 80-Pin CQFP (PCI

Mini-ACE Mark3) or 0.80 inch square

324 ball BGA (PCI Micro-ACE TE)

•

Compatible with PCI Enhanced Mini-

ACE, Enhanced Mini-ACE, Mini-ACE

and ACE Generations

•

Choice of :

RT only with 4K RAM (BU-65743)

- BC/RT/MT with 4K RAM (BU-65843)

- BC/RT/MT with 64K RAM, and RAM

Parity (BU-65863, BU-65864)

•

Sleep Mode Option

•

Choice of 10, 12, 16, or 20 MHz 1553

Clock

•

Highly Autonomous BC with Built-In

Message Sequence Control:

- Frame Scheduling

- Branching

- Asynchronous Message Insertion

- General Purpose Queue

- User-defined Interrupts

•

Advanced RT Functions

- Global Circular Buffering

- Interrupt Status Queue

- 50% Circular Buffer Rollover

Interrupts

•

Selective Message Monitor or

RT/Monitor

FOR MORE INFORMATION CONTACT:

DESCRIPTION

The PCI Mini-ACE Mark3/Micro-ACE TE family of MIL-STD-1553 terminals

provides a complete interface between a 32-Bit/33Mhz 3.3V signaling PCI Bus

and a MIL-STD-1553 bus. These terminals integrate dual transceiver, protocol

logic, and 4K or 64K words of RAM, all of which can be powered from 3.3V.

With a 0.88-inch square package, the PCI Mini-ACE Mark3 is the smallest

ceramic CQFP PCI 1553 solution available. The 0.80-inch square 324 ball BGA

PCI Micro-ACE TE has an even smaller footprint, but has a more restricted

operating temperature range. Both are 100% software compatible with the

larger PCI Enhanced Mini-ACE and add TAG_CLK inputs. The TAG_CLK input

allows a software selectable external time tag clock input. Both parts are avail-

able with a choice of either 3.3V transceivers or 5V transceivers.

The PCI Micro-ACE TE has a more restricted set of options compared to the

PCI Mini-ACE Mark3. Please consult the ordering information at the rear of the

data sheet to see which options are available. In addition, the PCI Micro-ACE

TE adds RTBOOT and 1553 clock select inputs for applications which must

boot into RT mode with Busy bit set.

The PCI Mini-ACE Mark3/Micro-ACE TE is nearly 100% software compatible

with the Enhanced Mini-ACE and previous generation Mini-ACE terminals. The

PCI interface to this terminal is not 5V tolerant.

Multiprotocol support of MIL-STD-1553A/B and STANAG 3838, including

Mark3 versions incorporating McAir compatible transmitters, is provided. There

is a choice of 10, 12, 16, or 20 MHz 1553 clocks. The BC/RT/MT versions with

64K words of RAM include built-in RAM parity checking.

BC features include a built-in message sequence control engine, with a set of

20 instructions. This provides an autonomous means of implementing multi-

frame message scheduling, message retry schemes, data double buffering,

asynchronous message insertion, and reporting to the host CPU.

The PCI Mini-ACE Mark3 and Micro-ACE TE RT offer single and circular sub-

address buffering schemes, along with a global circular buffering option, 50%

rollover interrupt for circular buffers, and an interrupt status queue.

FOR MORE INFORMATION CONTACT:

Technical Support:

1-800-DDC-5757 ext. 7771

Technical Support:

1-800-DDC-5757 ext. 7771

Data Device Corporation

105 Wilbur Place

Bohemia, New York 11716

631-567-5600 Fax: 631-567-7358

www.ddc-web.com

The technology used in DDC’s Micro-ACE series of products may be

subject to one or more patents pending.

All trademarks are the property of their respective owners.

2003 Data Device Corporation

Recommended Resources

Multi-channel signal generator circuit composed of upc1651

Reactance shunt excitation circuit

water thermometer circuit

Eddy current principle

intermittent operation circuit

Color TV remote control 19

WINCE startup problem, urgent help!: The phenomenon I encountered is the same as many posts on the Internet, but the problem is that it can be started on the development board, but not on the board I made. It can also be started on the p...; xiangyata Embedded System

How to add custom components in dts files: Does anyone know how to configure the dts file under soc, add your own device information in it, and then compile it into a driver tree dtb file, tks! ! ! ! ! ! ! The device I mentioned is my own cust...; flyingcool FPGA/CPLD

The SDK exported by wince 5.0 cannot dynamically link MFC?: I built a project with PB 5.0, and then exported the SDK for installation. Whether using EVC or VS2005, I cannot dynamically link MFC with this SDK. When I run it, it prompts that the component is mis...; zhousw08 Embedded System

Merry Christmas: [size=4]:pleased:Although it is a foreign festival, the important thing is to hope that everyone has a good time and is happy. Merry Christmas! [/size][size=4] [/size]attach://394214.mp4[size=4] Here ...; okhxyyo Talking

About the NFS problem in the development board rootfs: I used mount -t nfs -o nolock 196.168.0.110:/home/name/rootfs on the development board. I pressed Enter and there was no response. It went to the next line, and then it was blank and there was no erro...; huangl53 Embedded System

The power switching frequency is too fast and the program cannot run???: [table=98%,rgb(238, 238, 238)] [tr][td]For 103RBt6 board, if the power supply switching frequency is too fast, the program cannot run. What's the matter? Have you ever encountered this problem? The re...; 1021256354 stm32/stm8

Shortcut: 00 01 02 03 04 05 06 07 08 09 0A 0C 0F 0J 0L 0M 0R 0S 0T 0Z 10 11 12 13 14 15 16 17 18 19 1A 1B 1C 1D 1E 1F 1H 1K 1M 1N 1P 1S 1T 1V 1X 1Z 20 21 22 23 24 25 26 27 28 29 2A 2B 2C 2D 2E 2F 2G 2K 2M 2N 2P 2Q 2R 2S 2T 2W 2Z 30 31 32 33 34 35 36 37 38 39 3A 3B 3C 3D 3E 3F 3G 3H 3J 3K 3L 3M 3N 3P 3R 3S 3T 3V 40 41 42 43 44 45 46 47 48 49 4A 4B 4C 4D 4M 4N 4P 4S 4T 50 51 52 53 54 55 56 57 58 59 5A 5B 5C 5E 5G 5H 5K 5M 5N 5P 5S 5T 5V 60 61 62 63 64 65 66 67 68 69 6A 6C 6E 6F 6M 6N 6P 6R 6S 6T 70 71 72 73 74 75 76 77 78 79 7A 7B 7C 7M 7N 7P 7Q 7V 7W 7X 80 81 82 83 84 85 86 87 88 89 8A 8D 8E 8L 8N 8P 8S 8T 8W 8Y 8Z 90 91 92 93 94 95 96 97 98 99 9A 9B 9C 9D 9F 9G 9H 9L 9S 9T 9W

Popular Components