S:\part\s3\38\380-003-2OF2.prtS:\part\s3\38\380-003-2OF2.prt
S:\part\s3\38\380-003-2OF2.prt
REVISIONS
SYM.
DESCRIPTION
SEE SHEET 1
DATE
APPROVED
380-003
RANGE
MAX
.250( 6.4)
.375( 9.5)
.500(12.7)
.625(15.9)
.750(19.1)
.875(22.2)
1.000(25.4)
1.125(28.6)
1.250(31.8)
1.375(34.9)
H
.500(12.7)
.590(15.1)
.610(15.5)
.700(17.8)
.885(22.5)
.975(24.8)
.975(24.8)
1.125(28.6)
1.125(28.6)
1.225(31.1)
1.575(40.0)
1.775(45.1)
DASH
NO
01
02
03
04
05
06
07
08
09
10
TABLE VI
CABLE
GROUND
M
RING I.D.
MIN
MAX
.968(24.6) .125( 3.2) .125( 3.2)
1.046(26.6) .250( 6.4) .250( 6.4)
1.156(29.4) .375( 9.5) .250( 6.4)
1.218(30.9) .500(12.7) .375( 9.5)
1.343(34.1) .625(15.9) .500(12.7)
1.463(37.2) .750(19.1) .625(15.9)
1.593(40.5) .875(22.2) .625(15.9)
1.718(43.6) 1.000(25.4) .750(19.1)
1.843(46.8) 1.125(28.6) .875(22.2)
2.187(55.5) 1.250(31.8) 1.000(25.4)
1.684(42.8)
1.804(45.8)
1.824(46.3)
1.894(48.1)
1.984(50.4)
2.154(54.7)
2.154(54.7)
2.264(57.5)
2.264(57.5)
2.434(61.8)
2.684(68.2)
2.684(68.2)
E
MAX
G
MAX
P
MAX
.81(20.57)
.91(23.11)
.97(24.64)
1.03(26.16)
1.09(27.68)
1.15(29.21)
1.20(30.48)
1.27(32.26)
1.33(33.78)
1.39(35.31)
1.46(37.08)
1.59(40.38)
1.69(42.93)
1.27(32.26)
F
MAX
TABLE III
H
MAX
R
S
T
MAX
MAX
MAX
1.03(26.26) .69(17.53) .96(24.38)
1.91(48.77) .78(19.81) 1.78(45.21)
1.97(50.04) .81(20.57) 1.81(45.97)
2.03(50.56) .83(21.08) 1.83(46.48)
2.09(53.09) .85(21.59) 1.85(46.99)
2.15(54.61) .88(22.35) 1.88(47.75)
2.20(55.88) .90(22.86) 1.90(48.26)
2.27(57.66) .93(23.62) 1.93(49.02)
2.33(59.18) .95(24.13) 1.95(49.53)
2.39(60.71) .98(24.89) 1.98(50.29)
2.46(62.48) 1.15(29.21) 2.15(54.61)
2.59(65.79) 1.21(30.73) 2.21(56.13)
2.69(68.33) 1.24(31.50) 2.24(56.90)
1.49(37.85) .88(22.35) 1.10(27.94)
SHELL SIZE
F,L,S
A
03 6
08
08
10
10
12
12
14
14
16
16
18
18
20
20
22
22
24
24
28
32
36
61 6
09 .457(11.6) 1.674(42.5)
11 .520(13.2) 1.734(44.0)
13 .582(14.8) 1.794(45.6)
15 .645(16.4) 1.884(47.9)
17 .738(18.7) 1.994(50.6)
19 .926(23.5) 2.184(55.5)
21 .926(23.5) 2.184(55.5)
23 1.020(25.9) 2.334(59.3)
25 1.020(25.9) 2.334(59.3)
1.145(29.1) 2.384(60.6)
1.207(30.7) 2.484(63.1)
1.238(31.4) 2.574(65.4)
RANGE
EXAMPLE:
PRODUCT SERIES
MAX
.250( 6.4)
.312( 7.9)
.438(11.1)
.562(14.3)
.625(15.9)
.750(19.1)
.938(23.8)
1.250(31.8)
1.375(34.9)
1.625(41.3)
1.875(47.6)
2.375(60.3)
K
MAX
.780(19.8)
.780(19.8)
.780(19.8)
.780(19.8)
.811(20.6)
.905(23.0)
1.092(27.7)
1.124(28.5)
1.399(35.5)
1.399(35.5)
MAX
.312( 7.9)
.437(11.1)
.562(14.3)
.625(15.9)
.750(19.1)
.937(23.8)
1.250(31.8)
1.375(34.9)
1.625(41.3)
1.875(47.6)
380
RANGE
PART NUMBER DEVELOPMENT
A
S 003
M
16
10
M
6
DASH
NO
03
04
06
08
10
12
16
20
24
28
32
40
J
MAX
.760(19.3)
.760(19.3)
.760(19.3)
.760(19.3)
.760(19.3)
.760(19.3)
1.073(27.3)
1.323(33.6)
1.323(33.6)
1.572(39.9)
1.572(39.9)
1.572(39.9)
TABLE IV
CABLE
K
MIN
MAX
.843(21.4) .156( 4.0)
.906(23.0) .188( 4.8)
1.093(27.8) .281( 7.1)
1.187(30.1) .344( 8.7)
1.281(32.5) .375( 9.5)
1.500(38.1) .438(11.1)
1.719(43.7) .562(14.3)
2.062(52.4) .750(19.1)
2.312(58.7) .781(19.8)
2.719(69.1) .969(24.6)
2.969(75.4) 1.125(28.6)
3.531(89.7) 1.469(37.3)
DASH
NO
04
06
08
10
12
16
20
24
28
32
TABLE VII
CABLE
N
MIN
MAX
.957(24.3) .125( 3.2)
1.145(29.1) .250( 6.4)
1.332(33.8) .312( 7.9)
1.332(33.8) .350( 8.9)
1.551(39.4) .500(12.7)
1.770(45.0) .625(15.9)
2.113(53.7) .875(22.2)
2.363(53.7) 1.000(25.4)
2.770(70.4) 1.250(31.8)
3.020(76.7) 1.437(36.5)
CONNECTOR DESIGNATOR,
A,F,H,L OR S, TABLE I 1
ANGULAR FUNCTION,
S = STRAIGHT
A = 90
O
B = 45
O
H = 45
O
WELDED
J = 90
O
WELDED
BASIC NO
FINISH SYM, TABLE II 1
SHELL SIZE, TABLE III
NOTES:
1
SEE SHEET 2 (COMMON ACCESSORY INTERFACE DATA).
2
STANDARD MINIMUM LENGTH FOR STYLE I IS 1.00 INCH, FOR
STYLE II IS 1.50 INCHES. FOR SHORTER LENGTH, CONSULT
FACTORY. APPLIES TO SYM S, STRAIGHT, ONLY.
DASH NO, TABLE IV, V, VI, VII
STRAIN RELIEF STYLE (A-M-D-L)
LENGTH; STRAIGHT ONLY
(1/2 INCH INCREMENTS: e.g. ; 6 = 3 INCHES)
C
3
WHEN CABLE DIAMETER EXCEEDS INSIDE DIAMETER OF CONNECTOR
SHELL, STYLE II WILL BE SUPPLIED. E, F, G & H DIMENSIONS
DO NOT APPLY TO STYLE II, CONSULT FACTORY.
DASH
NO
03
04
06
08
10
12
16
20
24
28
32
40
TABLE V
L
MAX
.630(16.0)
.755(19.2)
.942(23.9)
1.067(27.1)
1.192(30.3)
1.380(35.1)
1.535(39.0)
2.848(46.9)
2.255(57.3)
2.505(63.6)
2.755(70.0)
3.255(82.7)
CABLE RANGE
MAX
.250( 6.4)
.312( 7.9)
.438(11.1)
.562(14.3)
.625(15.9)
.750(19.1)
.938(23.8)
1.250(31.8)
1.375(34.9)
1.625(41.3)
1.875(47.6)
2.375(60.3)
4.
METRIC DIMENSIONS (mm) ARE INDICATED IN PARENTHESES.
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN INCHES
TOLERANCES:
F
5.
GLENAIR 600 SERIES BACKSHELL ASSEMBLY TOOLS ARE RECOMMENDED
FOR ASSEMBLY AND INSTALLATION.
CAD 1994
6
SHELL SIZES 03 & 61 AVAILABLE ON ANGULAR FUNCTIONS H, J & S ONLY.
DRAWN
CHECK
ENGR
T.LE
P.OAKES
R.PAINTER
05/06/94
05/06/94
05/06/94
1211 AIR WAY - GLENDALE - CALIFORNIA 91201
7.
FRACTIONS
DECIMALS
ANGLES
MATERIAL/FINISH:
ELBOW, ADAPTER, COUPLING NUT, FERRULES & CLAMP - AL ALLOY/TABLE II
HARDWARE - CRES/PASSIVATE
+ 1/16
-
+ .03
.XX
-
.XXX + .015
-
+ 2
-
DO NOT SCALE THIS DRAWING
RELEASE DATE
ORIGINAL
RELEASE DATE
APPROVED
BACKSHELL, RFI/EMI FOR
CONNECTORS PER TABLE I
05/09/94
B/F
94-6774
P/C
380
NON REPARABLE COMMERCIAL ITEM
APPROVED
CODE IDENT. NO.
06324
Nestor Fuertes
SIZE
SCALE
N/A
WEIGHT
C
380-003
F
N/A
SHEET
REV.
3 OF 3
1 of 1
How
to Order
GLENAIR
SYMBOL
A
B
C*
G*
J
LF
M
N
NC
NF
T
U
ZU**
ZN
*
**
W
N
A
M85049 SYMBOL
REFERENCE ONLY
FINISH
Cadmium Plate, Bright
Anodize, Black
Hard Coat, Anodic
Electroless Nickel
Cadmium Plate, Black
Cadmium Plate, Black
Reference Information
Standard Materials and Finishes
TABLE II - STANDARD FINISHES
SPECIFICATION(S)
AMS-QQ-P-416, Type I, Class 2
AMS-QQ-P-416, Type II, Class 3
AMS-A-8625, Type II, Class 2
AMS-A-8625, Type III, Class 1
Cadmium Plate, Olive Drab
Iridite, Gold Over Cadmium Plate Over MIL-C-5541, Class 3 AMS-QQ-P-416, Type II,
Electroless Nickel
Class 3 over AMS-C-26074, Class 4, Grade B
Cadmium Plate, Bright Over
Electroless Nickel
Cadmium Plate, Olive Drab Over
Electroless Nickel
Zinc Cobalt, Dark Olive Drab
Cadmium Plate, Olive Drab Over
Electroless Nickel
Cadmium Plate, Bright Over
Electroless Nickel
1000 Hour Corrosion Resistance
AMS-C-26074, Class 4, Grade B
AMS-QQ-P-416, Type II, Class 3 over Electroless Nickel
AMS-C-26074
96 Hour Corrosion Resistance
1000 Hour Corrosion Resistance
AMS-QQ-P-416, Type I, Class 3
ASTMB 733-90, SC2, Type I, Class 5, MIL-C-26074***
AMS-QQ-P-416, Type II, Class 3
AMS-QQ-P-416, Type II, Class 3
ASTMB 841-91, Over Electroless Nickel 1000 Hour Salt
Spray
Zinc-Nickel Alloy, Olive Drab
Anodize finish; not suitable for EMI Shielding or grounding applications.
Applicable to corrosion resisting steel backshells and accessories. Consult factory for other available finishes.
The following standard materials are used for the majority of Glenair
backshells and connector accessories. However, backshell compo-
nents are not limited to those items listed, but are representative of
the elements used in Glenair's general accessory products. Contact
Glenair for applicable specifications on items not listed below.
STANDARD MATERIALS - BACKSHELLS AND ACCESSORIES
COMPONENT
Machined components: such as backshell bodies, fabricated elbows, protective covers,
rotatable couplers, dummy stowage receptacles, lock nuts, G-spring support rings,
EMI ground rings, grommet followers, etc.
Die cast components: such as angular backshells, strain relief backshells, strain relief
bodies, strain relief saddles, special EMI ground rings, etc.
Backshells or strain reliefs: available in optional corrosion resisting steel; and
hardware: such as screws, washers, rivets, wire rope, sash chain, band straps, etc.
Elastomeric seals: such as O-rings, cable jacket seals, grommets, etc.
Anti-friction and thrust washers
Anti-rotation device
MATERIAL
Aluminum
SPECIFICATION
AMS-QQ-A-200
ASTMB221, 209
QQ-A-591
ASTMB85, 26
Corrosion Resisting Steel ASTMA582 (300 Series)
AMS-QQ-S-763
Silicone
ZZ-R-765, MIL-R-25988
Teflon
TFE
N/A
Corrosion Resistant
Material
Aluminum
BODY STRAP
Glenair offers an optional stainless steel body strap for
attaching protective covers as illustrated. To specify body
strap, add suffix letter C to the end of the part number. For
example 360AS001M1610M6C.
NOTES
On all length callouts, tolerance is ± .060 unless otherwise
specified.
Unless otherwise specified, the following other dimensional
tolerances will apply:
.xx = ± .03 (0.8)
.xxx = ± .015 (0.4)
Lengths = ± .060 (1.52)
Angles = ± 5°
Metric dimensions (mm) are indicated in parentheses
2-56 Screw and Nut
© 2005 Glenair, Inc.
NOTE: For your convenience these tables have
been reproduced inside the back cover fold-out.
CAGE Code 06324
Printed in U.S.A.
GLENAIR, INC.
•
1211 AIR WAY
•
GLENDALE, CA 91201-2497
•
818-247-6000
•
FAX 818-500-9912
www.glenair.com
E-Mail: sales@glenair.com
14
Glenair Backshell and Accessory Material and Finish Options
Backshell and accessory base materials, plating options, specifications and codes
Code
A
AB
AL
B
C
E
G
J
JF
LF
M
MT
N
NC
NF
P
T
TP2
U
UC
UCR
UF
XAL
XB
XM
XMT
XO
XW
XZN
Z1
Z2
ZC
ZCR
ZL
ZM
ZMT
ZN
ZNU
ZR
ZU
ZW
Material
Aluminum
Marine Bronze
Aluminum
Aluminum
Aluminum
Aluminum
Aluminum
Aluminum
Aluminum
Aluminum
Aluminum
Aluminum
Aluminum
Aluminum
Aluminum
Stainless Steel
Aluminum
Titanium
Aluminum
Aluminum
Aluminum
Aluminum
Composite
Composite
Composite
Composite
Composite
Composite
Composite
Stainless Steel
Aluminum
Stainless Steel
Stainless Steel
Stainless Steel
Stainless Steel
Stainless Steel
Aluminum
Aluminum
Aluminum
Stainless Steel
Stainless Steel
Finish
Cadmium, No Chromate
Unplated
AlumiPlate, Clear Chromate
Cadmium, Olive Drab
Anodize, Black
Chem Film
Anodize, Hardcoat
Cadmium, Gold
Cadmium, Gold
Cadmium, Clear
Electroless Nickel
Nickel-PTFE
Cadmium, Olive Drab
Zinc-Cobalt, Olive Drab
Cadmium, Olive Drab
Electrodeposited Nickel
Cadmium, No Chromate
Electrodeposited Nickel
Cadmium, Black
Zinc-Cobalt, Black
Zinc-Cobalt, Black
Cadmium, Black
AlumiPlate
Unplated Black
Electroless Nickel
Nickel-PTFE
Unplated Light Brown
Cadmium, Olive Drab
Zinc-Nickel, Black
Passivate
Gold
Zinc-Cobalt, Black
Zinc-Cobalt, Black
Electrodeposited Nickel
Electroless Nickel
Nickel-PTFE
Zinc-Nickel, Olive Drab
Zinc-Nickel, Black
Zinc-Nickel, Black
Cadmium, Black
Cadmium, Olive Drab
Finish Specification
SAE-AMS-QQ-P-416 Type I Class 3
MIL-DTL-83488, Class 2, Type II over electroless nickel
SAE-AMS-QQ-P-416 Type II Class 3
AMS-A-8625 Type II Class 2
MIL-DTL-5541 Type 1 Class 3
AMS-A-8625 Type III, Class 1, .001" thick
SAE-AMS-QQ-P-416 Type II, Class 2 over electroless nickel
SAE-AMS-QQ-P-416 Type II, Class 2 over electroless nickel
SAE-AMS-QQ-P-416 Type II Class 2 over electroless nickel
AMS-C-26074 Class 4 Grade B; ASTM-B-733, SC 2, Type IV
GMF-002 Type II Class 1
SAE-AMS-QQ-P-416 Type II Class 3 over electroless nickel
ASTM B 840 Grade 6 Type D over electroless nickel
SAE-AMS-QQ-P-416 Type II Class 2 over electroless nickel
SAE-AMS-QQ-N-290 Class 1 Grade F
SAE-AMS-QQ-P-416 Type I Class 3
SAE-AMS-QQ-N-290 Class 1 Grade F
SAE-AMS-QQ-P-416 Type I Class 3
ASTM B 840 Grade 6 Type D over electroless nickel
ASTM B 840 Grade 6 Type D over electroless nickel
SAE-AMS-QQ-P-416 Type II Class 2 over electroless nickel
MIL-DTL-86448, Class 2, Type II over electroless nickel
AMS-C-26074
GMS-002 Class 2 Type II
SAE-AMS-QQ-P-416 Type II Class 3 over electroless nickel
ASTM B841 Grade 5 over electroless nickel
SAE-AMS-SAE-AMS-QQ-P-35 Type VI
MIL-DTL-45204 Class 1 over electroless nickel
ASTM-B840, Grade 6
ASTM-B840, Grade 6
SAE-AMS-QQ-N-290 Class 1 Grade F
AMS-C-26074 Class 1 Grade A
GMF-002 Type II Class 3
ASTM B841 Grade 5 over electroless nickel
ASTM B841 Grade 5 over electroless nickel
ASTM B841 Grade 5 over electroless nickel
SAE-AMS-QQ-P-416 Type II Class 3
SAE-AMS-QQ-P-416 Type II Class 2 over electroless nickel
Hrs. Salt
Spray
48
1000
1000
96
336
168
336
500
1000
1000
48
1000
500
350
1000
500
48
96
48
350
350
1000
2000
2000
2000
2000
2000
2000
2000
1000
48
Electrical
Conductivity
Conductive
Conductive
Conductive
Conductive
Non-Conductive
Conductive
Non-Conductive
Conductive
Conductive
Conductive
Conductive
Conductive
Conductive
Conductive
Conductive
Conductive
Conductive
Conductive
Conductive
Conductive
Conductive
Conductive
Conductive
Non-Conductive
Conductive
Conductive
Non-Conductive
Conductive
Conductive
Conductive
Conductive
Conductive
Conductive
Conductive
Conductive
Conductive
Conductive
Conductive
Conductive
Conductive
Conductive
Operating Temp.
Range
-65 to +175°C
-65 to +200°C
-65 to +175°C
-65 to +175°C
-65 to +175°C
-65 to +175°C
-65 to +200°C
-65 to +175°C
-65 to +175°C
-65 to +175°C
-65 to +200°C
-65 to +175°C
-65 to +175°C
-65 to +175°C
-65 to +175°C
-65 to +200°C
-65 to +175°C
-65 to +200°C
-65 to +175°C
-65 to +175°C
-65 to +175°C
-65 to +175°C
-65 to +175°C
-65 to +175°C
-65 to +175°C
-65 to +175°C
-65 to +175°C
-65 to +175°C
-65 to +175°C
-65 to +200°C
-65 to +200°C
-65 to +175°C
-65 to +175°C
-65 to +200°C
-65 to +200°C
-65 to +175°C
-65 to +175°C
-65 to +175°C
-65 to +175°C
-65 to +175°C
-65 to +175°C
RoHS
Notes
Not recommended for new projects. LF is preferred.
Marine and geophysical applications.
Approved for MIL-DTL-38999L and MIL-DTL-83513G.
Not recommended for new projects. NF is preferred.
Glenair’s standard black anodize finish.
Glenair’s standard chem film finish.
Glenair’s preferred hardcoat finish.
Not recommended for new projects. JF is preferred.
Glenair’s preferred gold cadmium finish.
Glenair’s preferred clear cadmium finish.
Glenair’s standard electroless nickel finish.
Approved for MIL-DTL-38999L and MIL-DTL-83513G.
Not recommended for new projects. NF is preferred.
Glenair’s standard olive drab zinc-cobalt finish.
Glenair’s standard olive drab cadmium finish.
Use ZM for electroless nickel alternative.
Not recommended for new projects. LF is preferred.
Glenair’s preferred finish for titanium connectors.
Not recommended for new projects. UF is preferred.
Glenair’s standard black zinc-cobalt finish.
RoHS version of UC.
Glenair’s preferred black cadmium finish.
Approved for MIL-DTL-38999L.
Glenair’s standard unplated composite.
Glenair’s standard electroless nickel finish over composite.
Approved for MIL-DTL-38999L.
Not recommended for new projects. Use XB.
Glenair’s standard olive drab cadmium finish over composite.
Glenair’s standard black zinc-nickel finish over composite.
Glenair’s standard passivated stainless steel.
Glenair’s standard gold plating for space programs.
Glenair’s standard zinc-cobalt over stainless steel.
RoHS version of ZC.
Used on hermetic connectors. Use ZM for other applications.
Glenair’s preferred nickel-plated stainless steel.
Glenair’s new 1000 Hour Grey over stainless steel.
Glenair’s standard olive drab zinc-nickel finish.
Glenair’s standard black zinc-nickel finish.
Glenair’s RoHs compliant black zinc-nickel.
Glenair’s standard black cadmium over stainless steel.
Glenair’s standard olive drab cadmium over stainless steel.
1000
1000
1000
1000
500
1000
2000
京公网安备 11010802033920号
EEWORLD
