ATC RF/Microwave Capacitors QPL Approved to MIL-PRF-55681 / 4 and 5
CDR
DESIGNATION: Identifies
established reliability, ceramic
dielectric, fixed, chip capacitors.
12
B
ATC PART NUMBER CODE:
G
101 A
F
W
S
FAILURE RATE LEVEL
(Established at 90% confidence):
M - - 1% per 1000 hours
P - - 0.1% per 1000 hours
R - - 0.01% per 1000 hours
S - - 0.001% per 1000 hours
STYLE: Identifies dimensions of the
capacitor and lead type, where applicable.
RATED TEMP: -55°C to +125°C
VOLTAGE TEMP. (TCC) LIMITS:
G = +90 ±20 PPM/°C; P = 0 ±30 PPM/°C
CAPACITANCE CODE: The first two digits represent
significant figures and the last digit specifies the number
of zeros to follow. When fractional values of pF are required,
the letter R shall be used to indicate the decimal point.
RATED DC VOLTAGE @ 125°C:
A - - 50 VDC, B - - 100 VDC, C - - 200 VDC,
D - - 300 VDC, E - - 500 VDC, K - - 150 VDC
TERMINATION FINISH:
N - Gold over Nickel over Silver (CDR11, CDR13)
S - Solder Coated, Final (CDR12, CDR14, CDR23, CDR25)
T - Silver (CDR21, CDR22, CDR24)
U - Solder Coated, Nickel Barrier (CDR12, CDR14)
N and U - Terminations preferred for best solder-
ability, thermocompression bonding, leach and mig-
ration resistance, and shelf life for chips and pellets.
W - Solder plated, nickel barrier (CDR12, CDR14, not
for new designs)
Z - Solder plated, nickel barrier (CDR12, CDR14)
CAPACITANCE TOLERANCE:
B (±0.1 pF), C (±0.25 pF), D (±0.5 pF), F (±1%),
G (±2%), J (+5%), K (±10%), M (±20%)
TYPE DESIGNATION*
TABLE I - STYLES CDR11 AND CDR12 CAPACITOR CHARACTERISTICS
CAPACITANCE
RANGE (pF)
CAPACITANCE
TOLERANCE
AVAILABLE
B
B, C
B, C, D
B, C, D
B, C, J, K, M
F, G, J, K, M
F, G, J, K, M
F, G, J, K, M
RATED TEMP. AND
VOLTAGE-TEMP.
LIMITS
Characteristic BG
(+90 ±20 PPM/°C)
and
Characteristic BP
(0 ±30 PPM/°C)
BP
RATED DC
VOLTAGE
CDR1-B-0R1KB-- to CDR1-B-0R2---B--
CDR1-B-0R3K--- to CDR1-B-0R4---
CDR1-B-0R5K--- to CDR1-B-2R2---**
CDR1-B-2R4K--- to CDR1-B-6R2---***
CDR1-B-6R8K--- to CDR1-B-9R1---***
CDR1-B-100K--- to CDR1-B-101K---***
CDR1-BP111K--- to CDR1-BP621---***
CDR1-BP681A--- to CDR1-BP102---***
0.1 pF to 0.2 pF
0.3 pF to 0.4 pF
0.5 pF to 2.2 pF
2.4 pF to 6.2 pF
6.8 pF to 9.1 pF
10 pF to 100 pF
110 pF to 620 pF
680 pF to 1000 pF
A = 50
K = 150
A = 50
B = 100
TABLE II - STYLES CDR13 AND CDR14 CAPACITOR CHARACTERISTICS
TYPE DESIGNATION*
CAPACITANCE
RANGE (pF)
0.1 pF to 0.2 pF
0.3 pF to 0.4 pF
0.5 pF to 2.2 pF
2.4 pF to 6.2 pF
6.8 pF to 9.1 pF
10 pF to 100 pF
110 pF to 200 pF
220 pF to 470 pF
510 pF to 620 pF
680 pF to 1000 pF
1100 pF to 5100 pF
CAPACITANCE
TOLERANCE
AVAILABLE
B
B, C
B, C, D
B, C, D
B, C, J, K, M
RATED TEMP. AND
VOLTAGE-TEMP.
LIMITS
RATED DC
VOLTAGE
CDR1-B-0R1EB-- to CDR1-B-0R2---B--
CDR1-B-0R3E--- to CDR1-B-0R4---
CDR1-B--0R5E--- to CDR1-B-2R2---**
CDR1-B-2R4E--- to CDR1-B-6R2---***
CDR1-B-6R8E--- to CDR1-B-9R1---***
CDR1-B-100E--- to CDR1-B-101---***
CDR1-B-111D--- to CDR1-B-201---***
CDR1-B-221C--- to CDR1-B-471C---***
CDR1-B-511B--- to CDR1-B-621---***
CDR1-B-681A--- to CDR1-B-102A---***
CDR1-BP112A--- to CDR1-BP512A---***
*
Characteristic BG
(+90 ±20 PPM/°C)
and
Characteristic BP
(0 ±30 PPM/°C)
C = 200
E = 500
F, G, J, K, M
BP
C = 200 D = 300
C = 200
A = 50 B = 100
A = 50
Complete type designation will include additional symbols to indicate style, voltage-temperature limits, capacitance tolerance
(where applicable), termination finish, and failure rate level.
** Intermediate values in this category are in 0.1 pF steps.
*** Intermediate values in each category are given by the RETMA 5% Table.
A M E R I C A N
T E C H N I C A L
ATC Europe
saleseur@atceramics.com
C E R A M I C S
ATC Asia
sales@atceramics-asia.com
2
ATC North America
sales@atceramics.com
w w w.a tc e r a m ics .c o m
ATC RF/Microwave Capacitors QPL Approved to MIL-PRF-55681 / 4 and 5
TABLE III - STYLES CDR21 TO CDR25 CAPACITOR CHARACTERISTICS
TYPE DESIGNATION*
CAPACITANCE
RANGE (pF)
0.1 pF to 0.2 pF
0.3 pF to 0.4 pF
0.5 pF to 2.2 pF
2.4 pF to 6.2 pF
6.8 pF to 9.1 pF
10 pF to 100 pF
110 pF to 200 pF
220 pF to 470 pF
510 pF to 620 pF
680 pF to 1000 pF
1100 pF to 5100 pF
CAPACITANCE
TOLERANCE
AVAILABLE
B
B, C
B, C, D
B, C, D
B, C, J, K, M
RATED TEMP. AND
VOLTAGE-TEMP.
LIMITS
RATED DC
VOLTAGE
CDR2-B-0R1EB-- to CDR2-B-0R2EB--
CDR2-B-0R3E--- to CDR2-B-0R4E---
CDR2-B--0R5E--- to CDR2-B-2R2E---**
CDR2-B-2R4E--- to CDR2-B-6R2E---***
CDR2-B-6R8E--- to CDR2-B-9R1E---***
CDR21-B-100E--- to CDR2-B-101E---***
CDR2-B-111D--- to CDR2-B-201D---***
CDR2-B-221C--- to CDR2-B-471C---***
CDR2-B-511B--- to CDR2-B-621B---***
CDR2-B-681A--- to CDR2-B-102A---***
CDR2-BP112A--- to CDR2-BP512A---***
*
Characteristic BG
(+90 ±20 PPM/°C)
and
Characteristic BP
(0 ±30 PPM/°C)
500 = E
F, G, J, K, M
BP
300 = D
200 = C
100 = B
50 = A
Complete type designation will include additional symbols to indicate style, voltage-temperature limits, capacitance tolerance
(where applicable), termination finish (T for styles CDR21, CDR22 and CDR24, and S for styles CDR23 and CDR25), and failure rate level.
Please note:
Leaded devices CDR 21 through CDR 25 are available to the R Failure Rate Level only.
** Intermediate values in this category are in 0.1 pF steps.
*** Intermediate values in each category are given by the RETMA 5% Table as follows: 10, 11, 12, 13, 15, 16, 18, 20, 22, 24, 27, 30, 33, 36, 39, 43, 47, 51, 56, 62, 68, 75, 82, 91.
MECHANICAL CONFIGURATIONS
MIL-
PRF-55681
STYLES
CDR 11
CDR 13
CDR 12
CDR 14
CDR 12
CDR 14
CASE
SIZE
A
B
A
B
A
B
B
TYPE
Chip
L
OUTLINES
BODY DIMENSIONS
LENGTH
WIDTH
THICKNESS
LEAD AND TERMINATION
DIMENSIONS
AND MATERIALS
N - Gold Over Nickel
Over Silver
N is ATC’s UNI-TERM
®
CA
W
T
.055 ±.015
(1.4 ±0.38)
.110 ±.020
(2.79 ±0.51)
.055 ±.025
(1.4 ±0.63)
T
.020/.057
(0.51/1.45)
.030/.102
(0.76/2.59)
.020/.057
(0.51/1.45)
.030/.102
(0.76/2.59)
.020/.057
(0.51/1.45)
.030/.102
(0.76/2.59)
CA
Chip
Pellet
Pellet
W/T IS A
TERMINATION SURFACE
P
W
L
.055 ±.015
(1.4 ±0.38)
.110 ±.020
(2.79 ±0.51)
P
W/T IS A
TERMINATION SURFACE
.110 +.035 -.020
(2.79 +0.89 -0.51)
S - Solder Coated, Final
U - Solder Coated,
Nickel Barrier
U is ATC’s BARRIER//CAP
®
Solder Plate
W
W
L
WL
TL
LL
.055 ±.015
(1.4 ±0.38)
T
Solder Plate
W
W/T IS A
TERMINATION SURFACE
L
T
W
.110 ±.020
(2.79 ±0.51)
W - Nickel Barrier,
Solder Plate.
CDR 21
Microstrip
MS
WL
TL
LL
LENGTH
WIDTH
W
L
T
TL
LL
THICK-
NESS
CDR 22
B
AR
Axial
Ribbon
Radial
Ribbon
WL
W
L
LL
T
.250 (6.35)
min.
WL
.093
±.005
(2.36
±0.13)
.004
±.001
(0.10
±0.03)
CDR 24
B
RR
W
L
LL
T
TL
WL
.135 ±.015
(3.43 ±0.38)
.110 ±.015
(2.79 ±0.38)
.060/.100
(1.52/2.54)
(Termination T - Silver)
CDR 23
B
Radial
RW
Wire
Axial
Wire
W
L
T
• •
L
W
L
LL
T
W
LL
WL
CDR 25
B
AW
• •
L
LL
T
.50 (12.7)
min.
•
T
W
• •
L
LL
#26 AWG
.016 (.375)
dia. nom.
(Termination S - Solder Coated)
All leads and ribbon are silver and are attached with high temperature solder.
T
W
All dimensions are in inches, except those in parentheses which are in millimeters.
STYLE
CDR11
CDR12
CDR13
CDR14
EQUIV. ATC PART NO.
CHARACTERISTICS
• •
BG
BP
LL
STYLE
CDR21
CDR22
CDR23
CDR24
CDR25
W
•
L
T
EQUIV. ATC PART NO.
CHARACTERISTICS
BG
BP
100B ------ MS
100B ------ AR
100B ------ RW
100B ------ RR
100B ------ AW
700B ------ MS
700B ------ AR
700B ------ RW
700B ------ RR
700B ------ AW
100A
100A
100B
100B
700A
700A
700B
700B
A M E R I C A N
ATC North America
sales@atceramics.com
T E C H N I C A L
ATC Europe
saleseur@atceramics.com
C E R A M I C S
ATC Asia
sales@atceramics-asia.com
w w w.a t c e r am ic s .c o m
3
Sales of ATC products are subject to the terms and conditions contained in American Technical Ceramics Corp. Terms and Conditions of Sale(ATC document #001-992). Copies of these terms
and conditions will be provided upon request. They may also be viewed on ATC’s website at www.atceramics.com/productfinder/default.asp. Click on the link for Terms and Conditions of Sale.
ATC has made every effort to have this information as accurate as possible. However, no responsibility is assumed by ATC for its use, nor for any infringements of rights of third parties which
may result from its use. ATC reserves the right to revise the content or modify its product without prior notice.
SPI Specialist (Process Optimization): 1. Bachelor degree or above, computer-related major2. More than 2 years of software development experience, at least 1 year of SPI, CMM or ISO related experience...
This is the sending code:
void Usart1SendChar(uint8_t chr){//Send an 8-bit string data through Usart1USART_SendData8(USART1, chr);//Wait for the sending to be completed and the flag bit to be lowwhile...
There are many types of LED display screens, which can be divided into indoor screens and outdoor screens according to the use environment. Indoor LED screens are very different from outdoor LED scree...
The source program is as follows://###########################################################################
//
// FILE:Example_2833xI2c_eeprom.c
//
// TITLE: DSP2833x I2C EEPROM Example
//
// ASSUM...
★Road conditions: very difficult, not suitable for single-handed efforts, it is best to travel in groups. ★Suitable vehicle type: short-wheelbase 4-wheel drive off-road vehicle, preferably a 6-cylin...
Introducing a TFT driver module M600. This module has great advantages. The driver module provides RS232 serial port mode, which controls the display of the screen through the protocol. It is very sim...
Microcontrollers (MCUs), which are widely used in automotive electronics, are rapidly facing time and cost pressures. The main advantage of using MCUs has always been to create high-level system in...[Details]
Abstract: In order to generate a stable excitation signal, the design of a digital frequency synthesizer is implemented on FPGA using Verilog hardware language. The design includes accumulator, wav...[Details]
With the continuous improvement of the requirements of intelligent building security systems and the continuous improvement of people's safety awareness, indoor anti-theft has gradually attracted peop...[Details]
1 Introduction
In recent years, there have been many major advances in the production technology and processes of automotive headlights, which have greatly improved the performance of automoti...[Details]
This controller uses PIC16C54 single-chip microcomputer as the controller, and it is very easy to use: just connect a telephone line to the loudspeaker through the controller, and you can rem...[Details]
Different initialization between C8051F and 80C51 series microcontrollers
In the past 30 years, major electronic component manufacturers in the world have launched their own unique single-chip...[Details]
Capacitance Measurement
Used to verify that capacitors meet the manufacturer's specifications. For quality control, a group of capacitors may be placed in an environmental chamber and the cap...[Details]
Motors are important products that convert electrical energy into mechanical energy to achieve automation, and they are widely used in industrial control, medical electronics, white a...[Details]
Introduction
Automakers are working to reduce vehicle weight to reduce CO2 emissions and improve fuel efficiency. Designers are therefore seeking new technologies and design techniques that can...[Details]
LED technology has made rapid progress, and improvements in chip design and materials have promoted the development of brighter and more durable light sources, and the scope of light source applica...[Details]
1. Overview
At present, an information revolution is in the ascendant around the world, led by microelectronics, computers and communication technologies, and centered on information technolog...[Details]
1 Introduction
With the improvement of people's quality of life, lamps are no longer just basic indoor lighting tools, but also a kind of practical art for architectural decoration. When ther...[Details]
Fruit planting is an important part of China's agricultural development, and fruit tree pest control operations are becoming more and more important. At present, the overall level of pesticide applica...[Details]
The invention of the steam engine ushered in the first conversion of internal energy and mechanical energy for mankind, and the birth of the internal combustion engine at the end of the 19th centur...[Details]
Overview
By transmitting ultrasonic energy into the human body and receiving and processing the returning reflected signals, phased array ultrasound systems can generate images of organs and s...[Details]
Embedded System
京公网安备 11010802033920号
EEWORLD
