302074-5ZTP976R00AB datasheet, PDF

Datasheet> All Categories > Passive components> The resistor> 302074-5ZTP976R00AB

302074-5ZTP976R00AB: DescriptionFixed Resistor, Metal Foil, 1.25W, 976ohm, 500V, 0.05% +/-Tol, -.2,.2ppm/Cel,; CategoryPassive components The resistor; File Size456KB，6 Pages; ManufacturerVishay; Websitehttp://www.vishay.com; Environmental Compliance

Download Datasheet Parametric View All

302074-5ZTP976R00AB Overview

Fixed Resistor, Metal Foil, 1.25W, 976ohm, 500V, 0.05% +/-Tol, -.2,.2ppm/Cel,

302074-5ZTP976R00AB Parametric

Parameter Name	Attribute value
Is it Rohs certified?	conform to
Objectid	852995974
Reach Compliance Code	compliant
ECCN code	EAR99
structure	Hermetically Sealed
JESD-609 code	e3
Lead diameter	0.645 mm
Lead length	25.4 mm
Number of terminals	4
Maximum operating temperature	125 °C
Minimum operating temperature	-55 °C
Package diameter	12.7 mm
Package length	25.4 mm
Package form	4 Terminals
method of packing	Bulk
Rated power dissipation(P)	1.25 W
resistance	976 Ω
Resistor type	FIXED RESISTOR
series	HZ(OTHER)
technology	METAL FOIL
Temperature Coefficient	-.2,.2 ppm/°C
Terminal surface	Tin (Sn)
Tolerance	0.05%
Operating Voltage	500 V

Preview

Download Datasheet

View All

HZ Series (Z-Foil) with Zero TCR

Vishay Foil Resistors

New Generation of Secondary Standards Hermetically Sealed Construction Ultra High

Precision Z-Foil Technology Resistors with TCR of ± 0.2 ppm/°C, Tolerance of ± 0.001 %

and Load Life Stability of ± 0.002 % (Metrology, Laboratory, Instrumentation, Industrial)

FEATURES



Temperature coefficient of resistance (TCR):

± 0.2 ppm/°C typical (- 55 °C to + 125 °C,

+ 25 °C ref.). For ultra high performances

(instrumentation and metrology) please refer to

the last page



Resistance range: 5



to 1.1 M (higher or lower values of

resistance available)



Foil resistors are not restricted to standard values; specific

“as required” values can be supplied at no extra cost or

delivery (e.g. 1K2345 vs. 1K)



Power coefficient “R due to self heating”:

5 ppm at rated power with the Z-Foil technology



Tolerance:

to ± 0.001 % (10 ppm)



Load life stability to ± 0.002 % (20 ppm) at 25 °C, 2000 h

at rated power



Load life stability, can be considerably improved

through in-house stabilization



Shelf life stability: 2 ppm for at least 6 years

(unaffected by humidity)



Electrostatic discharge (ESD) up to 25 000 V



Power rating: 0.3 W to 2.5 W at + 25 °C (depending on

model - see table 2)



Non-inductive, non-capacitive design



Non hot spot design



Rise time: 1 ns effectively no ringing



Current noise: 0.010 µV

RMS

/V of applied voltage (< - 40 dB)



Thermal EMF: 0.05 µV/°C typical



Voltage coefficient: < 0.1 ppm/V



Thermal stabilization time < 1 s (nominal value achieved

within 10 ppm of steady state value)



Non-inductive: < 0.08 µH



Terminal finish available: lead (Pb)-free or tin/lead alloy



Impervious to harmful environments - oil filled



Prototype quantities available in just 5 working days

or sooner. For more information, please contact

foil@vishaypg.com



For better performances (values, TCR, tolerance, stability),

please contact us

INTRODUCTION

The Z-Foil based oil filled, hermetically sealed HZ Series

resistors represent an industry breakthrough. The hermetic

sealing eliminates the ingress of moisture and oxygen, while

the oil acts as a thermal conductor, thus eliminating

long-term degradation elements of unsealed resistors, while

at the same time allowing the device to accept short periods

of overload without degradation.

The Z-Foil technology provides a significant reduction of the

resistive components, sensitivity to ambient temperature

variations (TCR) and applied power changes (PCR). When

combined with the hermetic sealing and oil filling, the

HZ Series resistors become

the most precise and stable

resistors available.

They are used as the most precise

secondary standards for ultra precision metrology.

With accuracies of ± 0.001 % (10 ppm) and a resistance

range from 5



to 1.1 M and long term shelf life of less than

2 ppm, these devices are virtually secondary standards that

can be carried in sets for daily or periodic calibration of

factory measurement equipment.

The HZ Series is available with laboratory and metrology

level precision and long-term stability with additional

in-house oriented processes such as: chip stabilization,

special TCR plotting, additional treatments for ultra

stability and special post manufacturing operations

(PMO). (Please refer to the last page)

TABLE 1 - TCR VS. RESISTANCE VALUE

RESISTANCE VALUE

()

TYPICAL TCR AND

MAX. SPREAD

(- 55 °C to + 125 °C, + 25 °C ref.)

(ppm/°C)

± 0.2 ± 2

± 0.2 ± 3

± 0.2 ± 4

FIGURE 1 - SHELF LIFE - VHA518-11

12K9 VS. QHE

0.9

0.8

0.7

0.6

0.5

0.4

0.3

0.2

0.1

- 0.1

100 200 300 400 500 600 700 800 900 1000

100 to < 1M1

50 to < 100

5 to < 50

Note

• For maximum TCR < 1 ppm/°C, see VHP100 and contact

application engineering

Resistance Change (ppm)

Time (Days)

Document Number: 63120

Revision: 25-Mar-10

For any questions, contact:

foil@vishaypg.com

www.foilresistors.com

Recommended Resources

Pulse coupled detector circuit diagram

LA3160 audio IC circuit

Three-phase power supply phase sequence detection circuit

555 digital timer circuit for competition

Verbal help box circuit for patient who has fainted

Computer motherboard circuit diagram 440GX_22

AVR ATmega1280 timer PWM output program: #include "kernel.h"unsigned int PWM_Buf[6];//6路PWM频率unsigned long timer0_ticks; unsigned long timer0_tickssec; unsigned long timer1_ticks; unsigned long timer1_ticksmin; unsigned long timer2_ticks; un...; 颜明远 Microchip MCU

Help all the experts! Regarding the connection problem between EBOOT and OAL! Still not solved! Urgently ask paul_chao to help! Thank you!: [b]1. I have added [/b] to config.bib [/b] [b]ELSE ;IMGFLASH [/b] #define NKSTART 9CA80000 (flash virtual start address (0x9ca00000) + EBOOT_OFFSET (0x80000)) #define NKLEN 01B00000 #define RAMSTART 8...; pkvpk Embedded System

RISC-V MCU Development (Part 7): Code Debugging: MounRiver Studio (MRS) can work with online debugging downloaders such as GD-Link, WCH-Link, and JLink to support code debugging functions for RISC-V/ARM core MCU projects such as GDVFx series, CH56x,...; Moiiiiilter MCU

Wince usbfn driver switching problem: I recently downloaded a USBSWITCH code from the Internet and modified it to achieve dynamic switching between a USBFN driver STD and the system driver MASS_STORAGE after the system is running, so that...; wzqd2001 Embedded System

The information on Qingke's website is becoming more and more complete: For example, the information of EMW3161: [url]http://www.joinmx.com/product.php?class_id=15&id=2[/url] EMW3161 is an ultra-small, ultra-low power embedded Wi-Fi module based on MX1081. MX1081 is an ul...; dontium RF/Wirelessly

Memory card formatting error, is there no way out?: I bought a certain brand of mobile phone memory card from an e-commerce website. After using it for 1 and a half years, it suddenly could not be recognized. After using data recovery software to recov...; sanhuasr Analog electronics

Shortcut: E0 E1 E2 E3 E4 E5 E6 E7 E8 E9 EA EB EC ED EE EF EG EH EI EJ EK EL EM EN EO EP EQ ER ES ET EU EV EW EX EY EZ F0 F1 F2 F3 F4 F5 F6 F7 F8 F9 FA FB FC FD FE FF FG FH FI FJ FK FL FM FN FO FP FQ FR FS FT FU FV FW FX FY FZ G0 G1 G2 G3 G4 G5 G6 G7 G8 G9 GA GB GC GD GE GF GG GH GI GJ GK GL GM GN GO GP GQ GR GS GT GU GV GW GX GZ H0 H1 H2 H3 H4 H5 H6 H7 H8 HA HB HC HD HE HF HG HH HI HJ HK HL HM HN HO HP HQ HR HS HT HU HV HW HX HY HZ I1 I2 I3 I4 I5 I6 I7 IA IB IC ID IE IF IG IH II IK IL IM IN IO IP IQ IR IS IT IU IV IW IX J0 J1 J2 J6 J7 JA JB JC JD JE JF JG JH JJ JK JL JM JN JP JQ JR JS JT JV JW JX JZ K0 K1 K2 K3 K4 K5 K6 K7 K8 K9 KA KB KC KD KE KF KG KH KI KJ KK KL KM KN KO KP KQ KR KS KT KU KV KW KX KY KZ

Popular Components