Above ratings are based on the thermal resistances using a multi-layer circuit board (EIA/JESD51). For mounting on a mono-layer board, power derating shall be
needed. Please inquire of us about conditions.
※1 素子毎の負荷電力の合計が、パッケージ定格電力を超えない条件で御½用ください。
※1 Total power consumption of all elements should not exceed the package power rating.
The resistor of this product is formed by narrow patterning a thin metal film. Thus, application of excessive voltage causes burn and destruction of the resistive film, abnormality
in resistance or open resistance and loss of proper function. The properly and electrostatically measured taping materials are used for the components, but attention should be paid
to the fact that there is some danger the parts may be destructed by static electricity(equivalent to 500V or over at 100pF, 1.5kΩ) to cause a change in resistance in the conditions
of an excessive dryness when mounting on the boards. Similarly, care should be given not to apply the excessive static electricity at the time of mounting on the boards. When
designing, consideration can be taken into withstanding ESD for customized KPC products. Please consult with us about the details.
●
Hand soldering by iron soldering or repairment are not recommended because KPC is a multi-pin product.
●
Avoid storing components under direct sun rays, high temperature/humidity. Direct sun rays will cause quality change of taping and difficulty of keeping appropriate peeling
strength. In the case of 5〜35℃/35〜75%RH, there is no deterioration of solderability for 12 months, but take special care for storing, because condensation, dust, and toxic gas
like hydrogen sulfide, sulfurous acid gas, hydrogen chloride, etc. may drop solderability.
[i=s]This post was last edited by ketose on 2018-10-1 20:05[/i] [size=4] Today I was setting up the buttons for the intercom. I wanted to use both buttons on the development board, but I encountered a...
[i=s]This post was last edited by wangerxian on 2021-11-26 15:01[/i]When talking about communications, you can only think of 5G Modem?Behind the excellent communication capabilitiesThere is also an un...
[b]Preface: [/b] [font=楷体_GB2312] "Either in Zhongfa or on the way to Zhongfa," it seems not an exaggeration to describe Ximen with this sentence. Ximen, who has been hanging around Zhongfa for many y...
I picked up an Arduino UNO development board and took a closer look with a magnifying glass. I found that the wiring and paint were very beautiful. I have never looked at it carefully before. I sighed...
The topic assigned by the teacher is to program a data recovery circuit using Verilog. I searched the Internet but couldn't find anything. Which expert can explain this circuit to me and what should I...
In recent years, with the rapid development of the information industry, dot matrix LED display screens have been widely used in various advertising and information display systems such as the fina...[Details]
Today, the value of electronic components in cars accounts for 15-20% of the total vehicle. In the future, this proportion may be as high as 30-40% as more safety electronics, fuel consumption and ...[Details]
1. Overview
At present, an information revolution is in the ascendant around the world, led by microelectronics, computers and communication technologies, and centered on information technolog...[Details]
1 Introduction
With the improvement of people's quality of life, lamps are no longer just basic indoor lighting tools, but also a kind of practical art for architectural decoration. When ther...[Details]
With the continuous advancement of various technologies in the field of measurement and control, the baseband subsystem of general measurement and control equipment has entered the fourth generation o...[Details]
Abstract: Based on the ZigBee parking lot SMS car search system, the location of the vehicle in the parking lot is sent to the owner through SMS, which is convenient for the owner to quickly find ...[Details]
Overview
By transmitting ultrasonic energy into the human body and receiving and processing the returning reflected signals, phased array ultrasound systems can generate images of organs and s...[Details]
introduction
Sudan's Muglad Oilfield is a large oilfield jointly invested, developed and constructed by a four-party consortium of China, Malaysia, Canada and Sudan. It consists of 8 satellite...[Details]
The rotor of the brushless DC motor used in electric bicycles is composed of 30 to 40 pieces of NdFeB magnets. Since the surface magnetic field strength of NdFeB magnets exceeds 500mT, the position se...[Details]
The battery and its management system are one of the key technologies of electric vehicles. In the past few years, most companies have encountered embarrassment in the development of electric vehic...[Details]
The cruise control system (CCS) of a vehicle is also called a constant speed driving system. It is an electronic control device that uses advanced electronic technology to automatically adjust the ...[Details]
Hall sensor
is a semiconductor element that works by using the Hall effect. Due to the high conversion efficiency, fast response speed, wide dynamic range, good frequency characteristics and ...[Details]
The development of the machinery manufacturing industry from single-machine automation to distributed DNC control systems requires the first technical solution to the information exchange and inter...[Details]
When you are sitting in the subway train, feeling the convenience and comfort brought by the underground rail train, at this time, in the control center, the "brain" of the subway, a group of people a...[Details]
One of the most common requirements of the automotive industry for automotive electronic systems is to achieve the best detection results in the smallest space. This is exactly the advantage of shunt ...[Details]
GD32 MCU
京公网安备 11010802033920号
EEWORLD
