TekProbe interface (P5202A, P5205A, and P5210A Series probes)
®
®
Safe high-voltage probe solutions
The THDP0100 and P5210A have the largest differential dynamic range
capability from Tektronix, allowing users to safely measure up to ±6000 V.
The THDP0100 supports bandwidths up to 100 MHz and slew rates up to
2500 V/ns at 1/1000 gain. These probes are supplied with two sizes of hook
tips and have an overrange visual and audible indicator which warns the
user when they are exceeding the linear range of the probe.
The THDP0200 and P5205A are active differential probes that are capable
of safely measuring differential voltages up to ±1500 V. The probes are
effective in making measurements in IGBT circuits such as motor drives and
power converters. The THDP0200 supports bandwidths up to 200 MHz and
slew rates up to 275 V/ns at 1/250 gain.
The TMDP0200 and P5202A are designed for medium-voltage applications
with differential requirements up to ±750 V. These probes have lower
attenuation ranges and offer better signal-to-noise ratio.
The P5200A can be used with any oscilloscope and enables users to safely
make measurements of floating circuits with their oscilloscope grounded.
The P5200A Active Differential Probe converts floating signals to low-
voltage ground-referenced signals that can be displayed safely and easily
on any ground-referenced oscilloscope.
Tektronix offers a broad portfolio of high-voltage probing solutions that
enable users to safely and accurately make floating measurements.
Key performance specifications
Bandwidths up to 200 MHz
Up to 6000 V differential (DC + pk AC)
Up to 2300 V common (RMS)
Key features
Overrange Indicator
Safety Certified
Switchable Attenuation
Switchable bandwidth limit
Applications
Floating measurements
Switching power supply design
Motor drive design
Electronic ballast design
CRT display design
Power converter design and service
Power device evaluation
Datasheet
Connectivity options
The TMDP and THDP Series probes are equipped with the TekVPI
interface which allows smart communication between the oscilloscope and
probe. Pushing the probe menu button will launch the probe control menu
on the oscilloscope display providing access to all relevant probe settings
®
and controls. These probes are designed to operate on TekVPI
oscilloscopes without requiring the TPA-BNC adapter.
®
The P52xxA Series probes are equipped with the Tektronix TekProbe
interface which communicates scale information to the oscilloscope. Direct
®
connections can be made to oscilloscopes configured with the TekProbe
®
interface or to any oscilloscope when used with the 1103 TekProbe Power
Supply.
®
Specifications
All specifications apply to all models unless noted otherwise.
Model overview
Probes with the TekVPI
®
interface
TMDP0200
Attenuation
Differential Voltage
Common Mode Voltage
Maximum Input Voltage-to-Earth
Bandwidth
Rise Time
Slew Rate
Input Impedance at the Probe Tip
Typical CMRR
25X / 250X
250X: ±750 V
25X: ±75 V
±750 V
550 V CAT I
300 V CAT III
200 MHz
<1.8 ns
<275 V/ns at 1/250 gain
5 MΩ || <2 pF
DC: > -80 dB
100 kHz: > -60 dB
3.2 MHz: > -30 dB
100 MHz: > -26 dB
1.5 m
THDP0200
50X / 500X
500X: ±1500 V
50X: ±150 V
±1500 V
1000 V CAT II
600 V CAT III
200 MHz
<1.8 ns
<650 V/ns at 1/500 gain
10 MΩ || <2 pF
DC: > -80 dB
100 kHz: > -60 dB
3.2 MHz: > -30 dB
100 MHz: > -26 dB
1.5 m
THDP0100
100X / 1000X
1000X: ±6000 V
100X: ±600 V
±6000 V
2300 V CAT I
1000 V CAT III
100 MHz
<3.5 ns
<2500 V/ns at 1/1000 gain
40 MΩ || <2.5 pF
DC: > -80 dB
100 kHz: > -60 dB
3.2 MHz: > -30 dB
100 MHz: > -26 dB
1.5 m
Cable Length
Probes with the BNC and TekProbe
®
interface
P5200A
Attenuation
Differential Voltage
Common Mode Voltage
50X / 500X
500X: ±1300 V
50X: ±130 V
±1300 V
P5202A
20X / 200X
200X: ±640 V
20X: ±64 V
±640 V
450 V CAT l
300 V CAT ll
100 MHz
5 MΩ || 2 pF
2.5 MΩ || 4 pF
DC: >80 dB
100 kHz: >60 dB
3.2 MHz: >40 dB
50 MHz: >30 dB
P5205A
50X / 500X
500X: ±1300 V
50X: ±130 V
±1300 V
1000 V CAT II
100 MHz
10 MΩ || 2 pF
5 MΩ || 4 pF
P5210A
100X / 1000X
1000X: ±5600 V
100X: ±560 V
±5600 V
2300 V CAT l
1000 V CAT III
50 MHz
40 MΩ || 2.5 pF
20 MΩ || 5 pF
Maximum Input Voltage-to-Earth 1000 V CAT II
Bandwidth
Differential Input Impedance
Input Impedance between each
Input and Ground
Typical CMRR
50 MHz
10 MΩ || 2 pF
5 MΩ || 4 pF
DC: >80 dB
100 kHz: >60 dB
3.2 MHz: >30 dB
50 MHz: >26 dB
1.8 m
Cable length
2 www.tektronix.com
1. The differential voltageis the maximum measurable range between the (+) and (-) input leads of the probe. Beyond these limits, the output could be clipped.
2. The maximum common mode voltage and maximum input voltage-to-earth (RMS) are the maximum voltages that each input lead (+/-) can be from ground.
Ordering information
Standard accessories
P5200A, P5202A, and P5205A
Description
Hook clips
Pincer clips
Alligator clips
Extension cables
Quantity included
1 set of red and black hook clips
1 set of red and black pincer clips
1 set of red and black alligator clips
1 set of red and black extension cables
Reorder part number
AC280-FL
AC283-FL
AC285-FL
196-3523-00
TMDP0200 and THDP0200
Description
Hook clips
Pincer clips
Alligator clips
Extension cables
Test leads
High voltage differential browser
Probe holder
Quantity included
2
2
2
2
2
1
1
Reorder part number
AC280-FL
AC283-FL
AC285-FL
196-3523-00
TP175-FL
THV-BROWSER
TPH1000
www.tektronix.com 3
Datasheet
THDP0100 and P5210A
Description
Probe tips
Large hook clips
Small hook clips
Probe heads
Quantity included
2
2
2
2
Reorder kit part number
020-3070-00
Probe and Accessory Derating Table
Common mode, relative to ground, when used with P52xxA Series probes
Accessory
Description
TMDP0200 / P5202A
450 V CAT I
300 V CAT II
Standard
450 V CAT I
300 V CAT II
Standard
450 V CAT I
300 V CAT II
Standard
450 V CAT I
300 V CAT II
Standard
450 V CAT I
300 V CAT II
Optional
450 V CAT I
300 V CAT II
Standard (TMDP0200)
550 V CAT I
300 V CAT III
THDP0200 / P5200A / P5205A
1000 V CAT II
600 V CAT III
Standard
1000 V CAT II
600 V CAT III
Standard
1000 V CAT II
600 V CAT III
Standard
1000 V CAT II
600 V CAT III
Standard
1000 V CAT II
600 V CAT III
Optional
1000 V CAT II
600 V CAT II
Standard (THDP0200)
1000 V CAT II
600 V CAT III
THDP0100 / P5210A
2300 V CAT I
1000 V CAT III
Standard
2300 V CAT I
1000 V CAT III
Optional
1000 V CAT I
1000 V CAT III
Optional
1000 V CAT I
1000 V CAT III
Optional
1000 V CAT I
1000 V CAT III
Standard
2300 V CAT I
1000 V CAT II
Optional
2300 V CAT I
1000 V CAT III
196-3523-00
2x Extender Leads (1.5 m)
2300 V CAT I
1000 V CAT III
2x Hook Clips
1000 V CAT III
600 V CAT IV
2x Pincer Clips
1000 V CAT III
600 V CAT IV
2x Alligator Clips
1000 V CAT III
600 V CAT IV
Hook Clip Kit
2300 V CAT I
1000 V CAT II
2x Test Leads
1000 V CAT III
600 V CAT IV
AC280-FL
AC283-FL
AC285-FL
020-3070-00
TP175-FL
Options
Power plug options (P5200A only)
Opt. A0
Opt. A1
Opt. A2
Opt. A3
Opt. A4
Opt. A5
Opt. A6
Opt. A10
Opt. A11
Opt. A12
Opt. A99
North America power plug (115 V, 60 Hz)
Universal Euro power plug (220 V, 50 Hz)
United Kingdom power plug (240 V, 50 Hz)
Australia power plug (240 V, 50 Hz)
North America power plug (240 V, 50 Hz)
Switzerland power plug (220 V, 50 Hz)
Japan power plug (100 V, 110/120 V, 60 Hz)
China power plug (50 Hz)
India power plug (50 Hz)
Brazil power plug (60 Hz)
No power cord
4 www.tektronix.com
Service options
Opt. C3
Opt. C5
Opt. D1
Opt. D3
Opt. D5
Opt. R3
Opt. R5
Opt. SILV200
Calibration Service 3 Years
Calibration Service 5 Years
Calibration Data Report
Calibration Data Report 3 Years (with Opt. C3)
Calibration Data Report 5 Years (with Opt. C5)
Repair Service 3 Years (including warranty)
Repair Service 5 Years (including warranty)
Standard warranty extended to 5 years
Probes and accessories are not covered by the oscilloscope warranty and Service Offerings. Refer to the datasheet of each probe and accessory model for its unique warranty
and calibration terms.
The P52xxA Series probes provide high-voltage differential measurement solutions for
any oscilloscope.
Tektronix is registered to ISO 9001 and ISO 14001 by SRI Quality System Registrar.
Run Ruby code on embedded microcontrollers. The MicroRuby framework allows Ruby bytecode to be executed on limited resource systems, including low-cost microcontrollers. Creating embedded applications...
[align=left][color=rgb(85, 85, 85)][size=3]The method of using MSP430F5xxx to implement real-time HDLC encoding and decoding in ETC system. MSP430F5xxx is the latest product series of TI's MSP430 fami...
After the first quarter of 2010, the factory was seriously under-utilized and the company's turnover was less than 1/4 of the first quarter of 2009. Under this circumstance, the company took measures ...
He was once an IC design engineer. He had the courage to imagine and challenge authority. At the age of 35, he created a new device that changed the semiconductor industry and created a new semiconduc...
[i=s]This post was last edited by dcexpert on 2018-7-7 11:09[/i] The pyboard/pyboardCN V2 uses I2C1 to access the MMA7660 accelerometer. However, if we use the following code to search for I2C devices...
I've been having problems using Quartus7.2 lately.
Then reinstall it
The license was found to be invalid (I used a cracker to crack it, but I was just learning, not doing any commercial purposes)
It c...
Hardware designers have begun to adopt FPGA technology in high-performance DSP designs because it can provide 10-100 times faster computing than PC-based or microcontroller-based solutions. Previou...[Details]
Assume that data is read from 8-bit AD (if it is a higher-bit AD, the data type can be defined as int), the subroutine is get_ad();
1. Limited secondary filtering
/* A value can be adjust...[Details]
introduction
1 The significance of using RTOS on MSP430
It is understandable that it is meaningless to use RTOS on MSP430. Because the hardware resources of MSP430 are limited (for exampl...[Details]
introduction
my country has a vast territory and a large population. The scale of housing construction is huge, and the amount of residential construction is large and wide. It is still on t...[Details]
Floating-point digital signal processing has become a constant requirement for precision technology, often in applications requiring high accuracy in areas such as aviation, industrial machinery, a...[Details]
Due to the significant increase in electronic devices in automotive and industrial applications, the automotive and industrial markets continue to play an important role in China's electronics in...[Details]
In this article, the high-performance DSP developed by TI can be used as an effective confidentiality method if it is applied to PC encryption cards.
As an effective network security solution,...[Details]
1 Introduction
Solar street lights are mainly composed of four parts: solar photovoltaic cell components, batteries, charge and discharge controllers, and lighting fixtures. The bo...[Details]
Contact resistance
is the resistance to current flow through a closed pair of contacts. This type of measurement is performed on devices such as connectors,
relays
, and switches. The...[Details]
I. Introduction
Since RS232 has a short communication distance (only 15 meters according to EAT/TAI-232 standard), and can only perform point-to-point communication, it cannot directly f...[Details]
1 Introduction to HART Protocol
HART (Highway Addressable Remote Transducer), an open communication protocol for addressable remote sensor high-speed channels, was launched by Rosemen in the U...[Details]
Digital array radar (DAR) uses digital beam forming (DBF) in both receiving and transmitting modes to achieve flexible distribution and reception of RF signal power in the airspace, obtain excellent t...[Details]
Overview
In spectral measurement, photomultiplier tubes (PMT) and charge-coupled devices (CCD) are often used as photoelectric converters. PMT is used in slow-changing, high-precision spectral...[Details]
TC9012F is a universal CMOS large-scale integrated circuit for infrared remote control signal transmission, suitable for remote control of TV, VTR, laser player and other equipment. In the market, ...[Details]
Analysis of the three core aspects of digital TV transmission standards
According to the differences in regionality, transmission method and modulation method, the transmission method needs to...[Details]
MicroPython Open Source section
京公网安备 11010802033920号
EEWORLD
