(2/16)
R F
C o m p o n e n t s
REMINDERS FOR USING THESE PRODUCTS
Before using these products, be sure to request the delivery specifications.
SAFETY REMINDERS
Please pay sufficient attention to the warnings for safe designing when using this products.
REMINDERS
The storage period is less than 6 months. Be sure to follow the storage conditions (temperature: 5 to 40°C, humidity: 10 to 75% RH or
less).
If the storage period elapses, the soldering of the terminal electrodes may deteriorate.
Do not use or store in locations where there are conditions such as gas corrosion (salt, acid, alkali, etc.).
Before soldering, be sure to preheat components.
The preheating temperature should be set so that the temperature difference between the solder temperature and chip temperature
does not exceed 150°C.
Soldering corrections after mounting should be within the range of the conditions determined in the specifications.
If overheated, a short circuit, performance deterioration, or lifespan shortening may occur.
When embedding a printed circuit board where a chip is mounted to a set, be sure that residual stress is not given to the chip due to
the overall distortion of the printed circuit board and partial distortion such as at screw tightening portions.
Self heating (temperature increase) occurs when the power is turned ON, so the tolerance should be sufficient for the set thermal
design.
Carefully lay out the coil for the circuit board design of the non-magnetic shield type.
A malfunction may occur due to magnetic interference.
Use a wrist band to discharge static electricity in your body through the grounding wire.
Do not expose the products to magnets or magnetic fields.
Do not use for a purpose outside of the contents regulated in the delivery specifications.
The products listed on this catalog are intended for use in general electronic equipment (AV equipment, telecommunications equip-
ment, home appliances, amusement equipment, computer equipment, personal equipment, office equipment, measurement equip-
ment, industrial robots) under a normal operation and use condition.
The products are not designed or warranted to meet the requirements of the applications listed below, whose performance and/or qual-
ity require a more stringent level of safety or reliability, or whose failure, malfunction or trouble could cause serious damage to society,
person or property.
If you intend to use the products in the applications listed below or if you have special requirements exceeding the range or conditions
set forth in the each catalog, please contact us.
(1) Aerospace/aviation equipment
(2) Transportation equipment (cars, electric trains, ships, etc.)
(3) Medical equipment
(4) Power-generation control equipment
(5) Atomic energy-related equipment
(6) Seabed equipment
(7) Transportation control equipment
(8) Public information-processing equipment
(9) Military equipment
(10) Electric heating apparatus, burning equipment
(11) Disaster prevention/crime prevention equipment
(12) Safety equipment
(13) Other applications that are not considered general-purpose
applications
When designing your equipment even for general-purpose applications, you are kindly requested to take into consideration securing pro-
tection circuit/device or providing backup circuits in your equipment.
20170912 / rf_balun_atb2012_en.fm
(3/16)
R F
C o m p o n e n t s
Product compatible with RoHS directive
Halogen-free
Compatible with lead-free solders
Balun transformers
Wound SMD
Overview of the ATB series
FEATURES
The ATB2012 case size is L2.0×W1.2.
The case size is smaller than conventional Baluns.
Low insertion loss and good balance parameters.
Conforms to the RoHS Directive.
APPLICATION
TV and mobile device tuners (DVB-T/H, ISDB-T, etc.)
STB / tuner power divider
NFC (Near Field Communication)
PART NUMBER CONSTRUCTION
ATB
Series name
2012
L x W dimensions
(mm)
2012
2.0×1.2
E
Internal
code
E
-
200
Input impedance
()
200
20
11
11
Impedance ratio
1:1
-
T
Packaging style
T
ø180mm reel
06
Internal code
ATB
Series name
2012
L x W dimensions
(mm)
2012
2.0×1.2
-
500
Input impedance
()
500
50
750
75
11
11
Impedance ratio
1:1
-
T
Packaging style
T
ø180mm reel
000
Internal code
ATB
Series name
2012
L x W dimensions
(mm)
2012
2.0×1.2
E
Internal
code
E
-
500
Input impedance
()
500
50
750
75
11
12
11
Impedance ratio
1:1
1:2
M
Product
internal
M
-
T
Packaging style
T
ø180mm reel
01
Internal
code
OPERATING TEMPERATURE RANGE, PACKAGE QUANTITY, PRODUCT WEIGHT
Type
Temperature range
Operating
Storage
temperature
temperature
(°C)
(°C)
–40 to +85
–40 to +85
–40 to +85
–40 to +85
Reel diameter
ø180mm
ø180mm
ø180mm
ø180mm
ø180mm
Package quantity
(pieces/reel)
4000
2000
2000
2000
2000
Individual weight
（mg）
5
8
8
8
8
ATB2012E-20011
ATB2012-50011
ATB2012E-50011M
–40 to +85
–40 to +85
ATB2012E-50012M
ATB2012-75011
–40 to +85
–40 to +85
ATB2012E-75011M
–40 to +85
–40 to +85
Operating temperature range includes self-temperature rise.
The storage temperature range is for after the assembly.
RoHS Directive Compliant Product: See the following for more details. https://product.tdk.com/info/en/environment/rohs/index.html
Halogen-free: indicates that Cl content is less than 900ppm, Br content is less than 900ppm, and that the total Cl and Br content is less than 1500ppm.
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
20170912 / rf_balun_atb2012_en.fm
京公网安备 11010802033920号
EEWORLD
