— Provides device-specific information to the system,
allowing host software to easily reconfigure for
different Flash devices
Sector Protection features
— A hardware method of locking a sector to prevent any
program or erase operations within that sector
— Sectors can be locked in-system or via programming
equipment
— Temporary Sector Unprotect feature allows code
changes in previously locked sectors
Erase Suspend/Erase Resume
— Suspends an erase operation to read data from, or
program data to, a sector that is not being erased,
then resumes the erase operation
Unlock Bypass Program Command
— Reduces overall programming time when issuing
multiple program command sequences
Data# Polling and toggle bits
— Provides a software method of detecting program or
erase operation completion
— Unlock Bypass Program Command
Reduces overall programming time when issuing
multiple program command sequences
Secured Silicon Sector
— 128-word sector for permanent, secure identification
through an 8-word random Electronic Serial Number
— May be programmed and locked at the factory or by
the customer
— Accessible through a command sequence
Hardware Features
Ready/Busy# pin (RY/BY#)
— Provides a hardware method of detecting program or
erase cycle completion
Compatibility with JEDEC standards
— Pinout and software compatible with single-power
supply Flash
— Superior inadvertent write protection
Hardware reset pin (RESET#)
— Hardware method to reset the device to reading array
data
Package Options
48-ball FBGA
48-pin TSOP
40-pin TSOP
WP#/ACC input pin
— Write protect (WP#) function allows protection of two
outermost boot sectors (boot sector models only),
regardless of sector protect status
— Acceleration (ACC) function provides accelerated
program times
Performance Characteristics
High performance
— Access times as fast as 70 ns
Publication Number
S29AL032D_00
Revision
A
Amendment
3
Issue Date
June 13, 2005
This document contains information on one or more products under development at Spansion LLC. The information is intended to help you evaluate this product. Do not
design in this product without contacting the factory. Spansion LLC reserves the right to change or discontinue work on this proposed product without notice.
A d v a n c e
I n f o r m a t i o n
General Description
The S29AL032D is a 32 megabit, 3.0 volt-only flash memory device, organized as 2,097,152
words of 16 bits each or 4,194,304 bytes of 8 bits each. Word mode data appears on DQ0-DQ15;
byte mode data appears on DQ0-DQ7. The device is designed to be programmed in-system with
the standard 3.0 volt VCC supply, and can also be programmed in standard EPROM programmers.
The device is available with access times as fast as 70 ns. The devices are offered in 40-pin TSOP,
48-pin TSOP and 48-ball FBGA packages. Standard control pins- chip enable (CE#), write enable
(WE#), and output enable (OE#)-control normal read and write operations, and avoid bus con-
tention issues.
The device requires only a
single 3.0 volt power supply
for both read and write functions. In-
ternally generated and regulated voltages are provided for the pro-gram and erase operations.
S29AL032D Features
The
Secured Silicon Sector
is an extra sector capable of being permanently locked by Spansion
or customers. The
Secured Silicon Indicator Bit
(DQ7) is permanently set to a 1 if the part is
factory locked,
and set to a 0 if customer lockable. This way, customer lockable parts can never
be used to replace a factory locked part.
Note that the S29AL032D has a Secured Silicon
Sector size of 128 words (256 bytes).
Factory locked parts provide several options. The Secured Silicon Sector may store a secure, ran-
dom 16 byte ESN (Electronic Serial Number), customer code (programmed through the Spansion
programming service), or both.
The S29AL032D is entirely command set compatible with the
JEDEC single-power-supply
Flash standard.
Commands are written to the command register using standard microprocessor
write timings. Register contents serve as input to an internal state-machine that controls the
erase and programming circuitry. Write cycles also internally latch addresses and data needed for
the programming and erase operations. Reading data out of the device is similar to reading from
other Flash or EPROM devices.
Device programming occurs by executing the program command sequence. This initiates the
Em-
bedded Program
algorithm—an internal algorithm that automatically times the program pulse
widths and verifies proper cell margin. The
Unlock Bypass
mode facilitates faster programming
times by requiring only two write cycles to program data instead of four.
Device erasure occurs by executing the erase command sequence. This initiates the
Embedded
Erase
algorithm—an internal algorithm that automatically preprograms the array (if it is not al-
ready programmed) before executing the erase operation. During erase, the device automatically
times the erase pulse widths and verifies proper cell margin.
The host system can detect whether a program or erase operation is complete by observing the
RY/BY# pin, or by reading the DQ7 (Data# Polling) and DQ6 (toggle)
status bits.
After a pro-
gram or erase cycle has been completed, the device is ready to read array data or accept another
command.
The
sector erase architecture
allows memory sectors to be erased and reprogrammed without
affecting the data contents of other sectors. The device is fully erased when shipped from the
factory.
Hardware data protection
measures include a low V
CC
detector that automatically inhibits write
operations during power transitions. The
hardware sector protection
feature disables both
program and erase operations in any combination of the sectors of memory. This can be achieved
in-system or via programming equipment.
2
S29AL032D
S29AL032D_00_A3 June 13, 2005
A d v a n c e
I n f o r m a t i o n
The
Erase Suspend/Erase Resume
feature enables the user to put erase on hold for any period
of time to read data from, or program data to, any sector that is not selected for erasure. True
background erase can thus be achieved.
The
hardware RESET# pin
terminates any operation in progress and resets the internal state
machine to reading array data. The RESET# pin may be tied to the system reset circuitry. A sys-
tem reset would thus also reset the device, enabling the system microprocessor to read the
boot-up firmware from the Flash memory.
The device offers two power-saving features. When addresses have been stable for a specified
amount of time, the device enters the
automatic sleep mode.
The system can also place the
device into the
standby mode.
Power consumption is greatly reduced in both these modes.
The Spansion Flash technology combines years of Flash memory manufacturing experience to
produce the highest levels of quality, reliability and cost effectiveness. The device electrically
erases all bits within a sector simultaneously via Fowler-Nordheim tunneling. The data is
Because the power supply is not clean and has several mV of high noise, it is a narrow pulse of about 100MHz when magnified, so an LC-PI filter circuit is added. However, because the transient current...
①For the OTA area, my understanding is that the user must define the boot_table_t structure at the address 0x08004000, and then fill in the content as needed. After the UPDATE[/size][/font][/color][co...
The seat wrapping of the new Elysee (torque sensor) has been enhanced, and the rear seats have also added a patented split-down function. The leather sewing process of the steering wheel and the large...
[i=s]This post was last edited by 向阳xl on 2019-10-14 17:30[/i]Note: Because the first version was incomplete, I have re-edited it to make the problem and my needs clear.The rightmost c105 in the figur...
I've seen that there are usually anti-interference measures at the entrance of DC power supply. But there are two types, one is to use two capacitors, one large and one small, and the other is a commo...
《Design of digital filter based on FPGA》：
It mainly introduces the design of digital filters using FPGA, and details the design of IIR and FIR digital filters using VHDL.《DSP+FPGA_Multiple Design Sche...
UHF and HF are both general technology categories, but each category has independent supporting protocols. HF is more consistent in the 13.56MHz frequency band, although there are many internation...[Details]
Sensors have made inroads into automotive, medical, industrial and aerospace applications. But you may not see anything changing yet. Growing demands for safety, convenience, entertainment and efficie...[Details]
Controller Area Network (CAN) is a type of fieldbus. It is a serial communication network that effectively supports distributed control or real-time control and is recognized as one of the most pro...[Details]
This summary will introduce the transmitter characteristic test of TD terminal products - uplink power control. According to the 3GPP TS34.122 standard, UE uplink power control is divided into uplink ...[Details]
1 Introduction
The intelligent meter reading system is a system that reads the data of multiple user meters in a centralized manner through the transmission media by the master station. It...[Details]
A financial analyst pointed out that the signal reception problems of Apple's 3G iPhone may be caused by some defective chips.
Richard Windsor, an analyst at Nomura Securities, said in a resea...[Details]
IntroductionUSB
, serial port, and parallel port are commonly used interfaces for communication between PC and peripherals. However, for images with large data volumes, if the serial RS-232 protoc...[Details]
0 Introduction
One of the basic tasks of machine vision is to obtain image information from the camera and calculate the geometric information of objects in three-dimensional space, so as ...[Details]
Preface
Sine wave inverters are widely used in various fields such as electricity, post and telecommunications, communications, and aerospace. Moreover, with the continuous development and...[Details]
Fairchild Semiconductor provides the industry's smallest power management solution FAN5902 for 3G mobile phone and wireless data card designers. This RF power DC-DC converter uses a 12-bump 0.5mm p...[Details]
Today, a new systematic maintenance approach can measure, locate and repair problems in rail and tram tracks in a timely manner. Combining mature railway engineering techniques with advanced techno...[Details]
Modern living patterns make the safety of family life particularly important. At present, security prevention and alarm systems are important guarantees for ensuring the safety of residences and re...[Details]
In recent years, LED has made great progress in backlight applications. It has not only been popularized in the backlight applications of small-size LCD displays, but has also begun to enter the ba...[Details]
Mathematical models have always been helpful in determining the best compensation components for a particular design, however, compensating a WLED current regulating boost converter is slightly dif...[Details]
In industrial and agricultural production, the transmission of collected data is mostly done by wired means, because the transmission distance, data transmission rate and anti-interference ability ...[Details]
Power technology
京公网安备 11010802033920号
EEWORLD
