MIC29150/29300/29500/29750
High-Current Low-Dropout Regulators
General Description
The MIC29150/29300/29500/29750 are high current, high
accuracy, low-dropout voltage regulators. Using Micrel's
®
proprietary Super
βeta
PNP process with a PNP pass
element, these regulators feature 350mV to 425mV (full
load) typical dropout voltages and very low ground current.
Designed for high current loads, these devices also find
applications in lower current, extremely low dropout-critical
systems, where their tiny dropout voltage and ground
current values are important attributes.
The MIC29150/29300/29500/29750 are fully protected
against overcurrent faults, reversed input polarity, reversed
lead insertion, overtemperature operation, and positive
and negative transient voltage spikes. Five pin fixed
voltage versions feature logic level ON/OFF control and an
error flag which signals whenever the output falls out of
regulation. Flagged states include low input voltage
(dropout), output current limit, overtemperature shutdown,
and extremely high voltage spikes on the input.
On the MIC29xx1 and MIC29xx2, the ENABLE pin may be
tied to VIN if it is not required for ON/OFF control. The
MIC29150/29300/29500 are available in 3-pin and 5-pin
2
TO-220 and surface mount TO-263 (D Pak) packages.
The MIC29750 7.5A regulators are available in 3-pin and
5-pin TO-247 packages. The 1.5A, adjustable output
MIC29152 is available in a 5-pin power D-Pak (TO-252)
package.
For applications with input voltage 6V or below, see
MIC37xxx LDOs.
Data sheets and support documentation can be found on
Micrel’s web site at
www.micrel.com.
Features
•
High current capability:
−
MIC29150/29151/29152/29153.............................. 1.5A
−
MIC29300/29301/29302/29303................................. 3A
−
MIC29500/29501/29502/29503................................. 5A
−
MIC29750/29751/29752 ......................................... 7.5A
•
Low-dropout voltage
•
Low ground current
•
Accurate 1% guaranteed tolerance
•
Extremely fast transient response
•
Reverse-battery and “Load Dump” protection
•
Zero-current shutdown mode
(5-pin versions)
•
Error flag signals output out-of-regulation
(5-pin versions)
•
Also characterized for smaller loads with industry-
leading performance specifications
•
Fixed voltage and adjustable versions
Applications
•
•
•
•
•
Battery-powered equipment
High-efficiency “Green” computer systems
Automotive electronics
High-efficiency linear lower supplies
High-efficiency lost-regulator for switching supply
_________________________________________________________________________________________________________________________
Typical Application**
Fixed Output Voltage
Adjustable Output Voltage
(*See Minimum Load Current Section)
Super βeta PNP is a registered trademark of Micrel, Inc.
**See Thermal Design Section
Micrel Inc. • 2180 Fortune Drive • San Jose, CA 95131 • USA • tel +1 (408) 944-0800 • fax + 1 (408) 474-1000 •
http://www.micrel.com
December 2012
M9999-122012-B
Microcontroller MCU
京公网安备 11010802033920号
EEWORLD
