Integrated Device Technology, Inc. reserves the right to make changes to its products or specifications at any time, without notice, in order to improve design or performance
and to supply the best possible product. IDT does not assume any responsibility for use of any circuitry described other than the circuitry embodied in an IDT product. The
Company makes no representations that circuitry described herein is free from patent infringement or other rights of third parties which may result from its use. No license is
granted by implication or otherwise under any patent, patent rights or other rights, of Integrated Device Technology, Inc.
CODE DISCLAIMER
Code examples provided by IDT are for illustrative purposes only and should not be relied upon for developing applications. Any use of the code examples below is completely
at your own risk. IDT MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND CONCERNING THE NONINFRINGEMENT, QUALITY, SAFETY OR SUITABILITY
OF THE CODE, EITHER EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICU-
LAR PURPOSE, OR NON-INFRINGEMENT. FURTHER, IDT MAKES NO REPRESENTATIONS OR WARRANTIES AS TO THE TRUTH, ACCURACY OR COMPLETENESS
OF ANY STATEMENTS, INFORMATION OR MATERIALS CONCERNING CODE EXAMPLES CONTAINED IN ANY IDT PUBLICATION OR PUBLIC DISCLOSURE OR
THAT IS CONTAINED ON ANY IDT INTERNET SITE. IN NO EVENT WILL IDT BE LIABLE FOR ANY DIRECT, CONSEQUENTIAL, INCIDENTAL, INDIRECT, PUNITIVE OR
SPECIAL DAMAGES, HOWEVER THEY MAY ARISE, AND EVEN IF IDT HAS BEEN PREVIOUSLY ADVISED ABOUT THE POSSIBILITY OF SUCH DAMAGES. The code
examples also may be subject to United States export control laws and may be subject to the export or import laws of other countries and it is your responsibility to comply with
any applicable laws or regulations.
LIFE SUPPORT POLICY
Integrated Device Technology's products are not authorized for use as critical components in life support devices or systems unless a specific written agreement pertaining to
such intended use is executed between the manufacturer and an officer of IDT.
1. Life support devices or systems are devices or systems which (a) are intended for surgical implant into the body or (b) support or sustain life and whose failure to perform,
when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user.
2. A critical component is any components of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device
or system, or to affect its safety or effectiveness.
IDT, the IDT logo, and Integrated Device Technology are trademarks or registered trademarks of Integrated Device Technology, Inc.
About This Manual
®
Notes
Overview
This user manual includes hardware and software information on the 89HPES24NT6AG2, a member of
IDT’s PRECISE™ family of PCI Express® switching solutions offering the next-generation I/O interconnect
standard.
Finding Additional Information
Information not included in this manual such as mechanicals, package pin-outs, and electrical character-
istics can be found in the data sheet for this device, which is available from the IDT website
(www.idt.com)
as well as through your local IDT sales representative.
Content Summary
Chapter 1, “PES24NT6AG2 Device Overview,”
provides an introduction to the performance capabili-
ties of the 89HPES24NT6AG2 and a high level architectural overview of the device.
Chapter 2, “Clocking,”
provides a description of the PES24NT6AG2 clocking architecture.
Chapter 3, “Reset and Initialization,”
describes the PES24NT6AG2 reset operations and initialization
procedure.
Chapter 4, “Switch Core,”
provides a description of the PES24NT6AG2 switch core.
Chapter 5, “Switch Partitions,”
describes how the PES24NT6AG2 supports up to 6 active switch parti-
tions.
Chapter 6, “Failover,”
provides a description of the flexible failover mechanism that allows the
construction of highly-available systems.
Chapter 7, “Link Operation,”
describes the operation of the link feature including polarity inversion,
link width negotiation, and lane reversal.
Chapter 8, “SerDes,”
describes basic functionality and controllability associated with the Serialiazer-
Deserializer (SerDes) block in PES24NT6AG2 ports.
Chapter 9, “Power Management,”
describes the power management capability structure located in the
configuration space of each PCI-to-PCI bridge in the PES24NT6AG2.
Chapter 10, “Transparent Operation,”
describes the device-specific architectural features for the
transparent switch associated with each PES24NT6AG2 partition (i.e., the PCI-to-PCI bridge functions and
their interaction in the switch).
Chapter 11, “Hot-Plug and Hot-Swap,”
describes the behavior of the hot-plug and hot-swap features
in the PES24NT6AG2.
Chapter 12, “SMBus Interfaces,”
describes the operation of the 2 SMBus interfaces on the
PES24NT6AG2.
Chapter 13, “General Purpose I/O,”
describes how the 9 General Purpose I/O (GPIO) pins may be
individually configured as general purpose inputs, general purpose outputs, or alternate functions.
Chapter 14, “Non-Transparent Operation,”
describes how a non-transparent bridge in the
PES24NT6AG2 allows two roots or PCI Express trees (i.e., hierarchies) to be interconnected with one or
more shared address windows between them.
Chapter 15, “DMA Controller,”
describes how the PES24NT6AG2 supports two direct memory access
controller (DMA) functions.
PES24NT6AG2 User Manual
1
January 30, 2013
IDT
Notes
Chapter 16, “Switch Events,”
describes mechanisms provided by the PES24NT6AG2 to facilitate
communication between roots associated with different partitions as well as for communication between
these roots and a management agent.
Chapter 17, “Multicast,”
describes how the multicast capability enables a single TLP to be forwarded
to multiple destinations.
Chapter 18, “Temperature Sensor,”
provides a description of the on-chip temperature sensor with
three programmable temperature thresholds and a temperature history capability.
Chapter 19, “Register Organization,”
describes the organization of all the software visible registers in
the PES24NT6AG2 and provides the address space for those registers.
Chapter 20, “PCI to PCI Bridge and Proprietary Port Specific Registers,”
lists the Type 1 configura-
tion header registers in the PES24NT6AG2 and provides a description of each bit in those registers.
Chapter 21, “Proprietary Registers,”
lists the proprietary registers in the PES24NT6AG2 and provides
a description of each bit in those registers.
Chapter 22, “NT Endpoint Registers,”
lists the NT Endpoint registers in the PES24NT6AG2 and
provides a description of each bit in those registers.
Chapter 23, “DMA Registers,”
lists the DMA registers in the PES24NT6AG2 and provides a descrip-
tion of each bit in those registers.
Chapter 24, “Switch Control Registers,”
lists the switch control and status registers in the
PES24NT6AG2 and provides a description of each bit in those registers.
Chapter 25, “JTAG Boundary Scan,”
discusses an enhanced JTAG interface, including a system logic
TAP controller, signal definitions, a test data register, an instruction register, and usage considerations.
Chapter 26, “Usage Models,”
describes possible configurations of the PES24NT6AG2 switch and
presents some important system usage models.
Signal Nomenclature
To avoid confusion when dealing with a mixture of “active-low” and “active-high” signals, the terms
assertion and negation are used. The term assert or assertion is used to indicate that a signal is active or
true, independent of whether that level is represented by a high or low voltage. The term negate or negation
is used to indicate that a signal is inactive or false.
To define the active polarity of a signal, a suffix will be used. Signals ending with an ‘N’ should be inter-
preted as being active, or asserted, when at a logic zero (low) level. All other signals (including clocks,
buses and select lines) will be interpreted as being active, or asserted when at a logic one (high) level.
To define buses, the most significant bit (MSB) will be on the left and least significant bit (LSB) will be on
the right. No leading zeros will be included.
Throughout this manual, when describing signal transitions, the following terminology is used. Rising
edge indicates a low-to-high (0 to 1) transition. Falling edge indicates a high-to-low (1 to 0) transition. These
terms are illustrated in Figure 1.
PES24NT6AG2 User Manual
2
January 30, 2013
IDT
Notes
single clock cycle
1
2
3
4
high-to-low
transition
low-to-high
transition
Figure 1 Signal Transitions
Numeric Representations
To represent numerical values, either decimal, binary, or hexadecimal formats will be used. The binary
format is as follows: 0bDDD, where “D” represents either 0 or 1; the hexadecimal format is as follows:
0xDD, where “D” represents the hexadecimal digit(s); otherwise, it is decimal.
The compressed notation ABC[x|y|z]D refers to ABCxD, ABCyD, and ABCzD.
The compressed notation ABC[y:x]D refers to ABCxD, ABC(x+1)D, ABC(x+2)D,... ABCyD.
Data Units
The following data unit terminology is used in this document.
Term
Byte
Word
Doubleword (DWord)
Quadword (QWord)
Words
1/2
1
2
4
Bytes
1
2
4
8
Bits
8
16
32
64
Table 1 Data Unit Terminology
In quadwords, bit 63 is always the most significant bit and bit 0 is the least significant bit. In double-
words, bit 31 is always the most significant bit and bit 0 is the least significant bit. In words, bit 15 is always
the most significant bit and bit 0 is the least significant bit. In bytes, bit 7 is always the most significant bit
and bit 0 is the least significant bit.
The ordering of bytes within words is referred to as either “big endian” or “little endian.” Big endian
systems label byte zero as the most significant (leftmost) byte of a word. Little endian systems label byte
zero as the least significant (rightmost) byte of a word. See Figure 2.
Owning more than two watches does not help people judge time more accurately. Instead, it creates confusion and makes the person who looks at the watch lose his or her judgment of time. This is the fa...
1. Who can provide a detailed feature comparison between WinCE 6 and the newer WinCE 5? (I found a comparison on a foreigner's page on Google, but it's not very detailed) It would be best if it's very...
Can anyone talk about the principle, design features, etc. of this article?http://www.ti.com/general/docs/litabsmultiplefilelist.tsp?literatureNumber=slaa515...
The core of a machine vision system is image acquisition and processing. All information comes from images, and image quality is crucial to the entire vision system. A good image can improve the st...[Details]
Recently,
Xpeng Motors and Xinlian Integrated Circuit jointly announced the mass production of China's first hybrid silicon carbide product.
Designed and developed by Xpeng Motors and joint...[Details]
On August 22nd, Lantu Motors unveiled a new technology called "Lanhai Intelligent Hybrid" during a live broadcast of CCTV News' "Top Laboratory." The name sounds like another new term, but a closer...[Details]
For autonomous vehicles to safely navigate the road, they must identify far more complex objects than just traffic lights, pedestrians, and other familiar objects. Among these obstacles is a crucia...[Details]
Electric vehicles are becoming increasingly popular, with increasingly longer ranges. There are two ways to charge electric vehicles: slow charging and fast charging. Which is the most suitable? Sl...[Details]
SMT placement machines are important equipment in surface mount technology (Surface Mount Technology). Their performance has a decisive impact on the quality and efficiency of electronic manufactur...[Details]
1. Multi-channel DAC technology bottleneck
Currently,
the development of multi-channel DAC technology focuses on two core challenges.
First, industrial applications urgently ...[Details]
The 2025 China International Automotive Testing Exhibition will be held at the Shanghai World Expo Exhibition and Convention Center from August 27 to 29, 2025.
Clacton Seafront, UK, ...[Details]
Reflow soldering, as an electronics assembly process, has become a vital component of the electronics manufacturing industry. Choosing reflow soldering equipment is crucial for improving production...[Details]
Speaking of the problem of vehicle spontaneous combustion, whether it is a pure electric vehicle or a fuel vehicle, there will be incidents of spontaneous combustion. For the same spontaneous combu...[Details]
Tires are a very important component for cars. They are related to the driving experience of the vehicle. We are almost inseparable from cars in our daily lives. For tires, according to the role of...[Details]
Consumer demand for premium listening experiences has driven rapid evolution in the wireless headphone market in recent years. Hybrid designs, which utilize two drivers per earbud to enhance sound ...[Details]
Lithium-ion batteries are a key component of electric vehicles. Their high energy density enables them to store a large amount of energy in a relatively compact and lightweight package, which is cr...[Details]
The screen is the first thing you notice when evaluating a phone's quality. Its quality directly impacts both visual and operational performance. However, understanding mobile phone screens r...[Details]
With the growth of the Internet of Things (IoT), wearable, and portable devices, consumers are growing weary of cluttered cables and the need for frequent battery recharges. The benefits of wireles...[Details]
MCU
京公网安备 11010802033920号
EEWORLD
