2. Zero-scale allows the wiper to “directly” connect to Terminal B, while full-scale allows the wiper to “directly” connect to Terminal A.
3. There is one R
s
resistor between the maximum wiper value and Terminal A.
4. This current is with the serial interface inactive, and not during an EEPROM write cycle (for non-volatile devices).
5. The serial interface has been tested to 1.8V, the device’s analog characteristics (resistor) have been tested from 2.7V to 5.5V. Review the device’s characterization graphs for information on analog
performance between 1.8V and 2.7V.
6. One of the terminal pins (A or B) is internally connected to ground, due to the limitation of the number of pins on the package.
Packages
Device
Digital Potentiometers Design Guide
3
Low-Voltage Applications
Low-Voltage Applications
Some applications require a low operating voltage. Microchip offers most of the volatile memory devices and some of the
non-volatile devices specified down to 1.8V for their digital operation. The analog performance between 1.8V and 2.7V is
not specified, but is characterized and can be found in the device’s characterization graphs for more information.
Zero-scale allows the wiper to “directly” connect to Terminal B, while full-scale allows the wiper to “directly” connect to Terminal A.
This current is with the serial interface inactive, and not during an EEPROM write cycle (for non-volatile devices).
The digital serial interface has been tested to 1.8V but the device’s analog characteristics have only been specified from 2.7V to 5.5V. Review the device’s characterization graphs for information on
analog performance between 1.8V and 2.7V.
6. One of the terminal pins (A or B) is internally connected to ground, due to the limitation of the number of pins on the package.
7. Shutdown support via software (TCON register(s)). If device has SHDN pin, software shutdown also functions.
Zero-scale allows the wiper to “directly” connect to Terminal B, while full-scale allows the wiper to “directly” connect to Terminal A.
This current is with the serial interface inactive, and not during an EEPROM write cycle (for non-volatile devices).
The digital serial interface has been tested to 1.8V but the device’s analog characteristics have only been specified from 2.7V to 5.5V. Review the device’s characterization graphs for information on
analog performance between 1.8V and 2.7V.
6. One of the terminal pins (A or B) is internally connected to ground, due to the limitation of the number of pins on the package.
7. Shutdown support via software (TCON register(s)). If device has SHDN pin, software shutdown also functions.
1. According to the relevant literature, most ultrasonic transmitting and receiving circuits use discrete components, which are amplified and filtered before being processed at the later stage. Howeve...
I always have this problem when I use CCS5.1 to burn my own board, but it is normal when I use another board. What is the reason? I have also changed the chip, but it is still the same. Please give me...
Summary of basic knowledge of single-chip microcomputers 1. Classification of ARM cores: When ARM launched ARM7, ARM9, and ARM11 in the early days, they were classified by ARM+numbers. The larger the ...
I would like to know what bus, bus voltage and bus current mean. I am working on brushless DC motor drive recently and need to use inverter module. I don't understand what bus is in the literature. Pl...
Capacitive sensors can detect metals and non-conductive materials. Think of viscose, as well as water-based liquids such as (petroleum) oil and water or various other solids such as plastic, stainless...
Emergency hand-held lamps powered by 6V maintenance-free batteries are widely used in rural areas. The charger used is a transformer step-down and single diode half-wave rectifier, and the charging...[Details]
The Mobile Industry Processor Interface (MIPI) Alliance is an organization responsible for promoting the standardization of software and hardware in mobile devices. It has released the D-PHY specif...[Details]
1 Introduction
Ultrasonic waves have strong directivity, slow energy consumption, and can propagate over long distances in a medium, so they are used for distance measurement. Ultrasonic detec...[Details]
In the previous series, we have listed some basic knowledge of C language in Tables 1 to 3. We hope that beginners can strengthen their memory of the above tables and gradually learn to use them wh...[Details]
Instrument stepper motor
The stepper motor is an open-loop control element that converts electrical pulse signals into angular displacement or linear displacement. In the case of non...[Details]
1 Introduction
Intelligent control instruments are one of the most commonly used controllers in industrial control. They are mainly aimed at a specific parameter (such as pressure, tempera...[Details]
1 Introduction
Building Automation System (BAS) is a distributed monitoring system (DCS) designed according to distributed information and control theory. It is the result of the mutual de...[Details]
1 Introduction
With the development of control, computer, communication, network technology, etc., a new control technology, namely fieldbus, has emerged in the field of industrial control...[Details]
1. Introduction to CIF Board
Fieldbus integration based on PC system
Whether it is a master or a slave, fieldbus has won unanimous praise in the field of PC-based automation. For more...[Details]
With the widespread application of new services and technologies in the communications industry, the scale and capacity of operators' network construction are getting larger and larger, and the ris...[Details]
Portable power applications are broad and varied. Products range from wireless sensor nodes with average power consumption of only a few microwatts to in-vehicle medical or data acquisition systems...[Details]
introduction
When it comes to the production of mobile phone lithium-ion batteries, the first thing that comes to mind is Japan's industrialized mechanical assembly line, NOKIO, MOTOLROLA's st...[Details]
The power supply is the core component of a computer. Although it is not of high value, all computer components rely on the switching power adapter to provide energy, so the stability of a power su...[Details]
Today's automotive application developers face numerous design challenges as modern cars add more electronic functionality, while the need for lower power consumption and smaller printed circuit bo...[Details]
Integrated technical exchanges
京公网安备 11010802033920号
EEWORLD
