There is a problem with using Receive to implement format conversion in DShow development. HRESULT Receive(IMediaSample *pSample) { YUV2RGB565(pSample, m_width, m_height, unsigned char* pRGB); return ...
Recently, some colleagues wrote some code in C++. The code image they wrote in the past six months is larger than the compiled code we have accumulated for 10 years. I used NMPPC to sort and export va...
The TIMER trigger ADC configuration method can't enter the interrupt. Can you please see if there is any problem? The ADC_TRIGGER_PROCESSOR method can enter the interrupt, but the ADC_TRIGGER_TIMER me...
There are two common methods for reducing ripple in PWM DACs: one is to lower the cutoff frequency of the low-pass filter, and the other is to increase the frequency of the PWM signal. However, the fo...
This program is written to simulate the serial port hardware mechanism. When used, a timed interrupt can be set with a time interval of 1/4 baud rate. The receiving function is called once for ea...[Details]
DSP (digital signal processor) is used more and more frequently in today's engineering applications. There are three main reasons for this: first, it has powerful computing power and is capable of ...[Details]
The rectified DC voltage is then converted back to AC using power electronics such as insulated gate bipolar transistors.
The output voltage is switched on and off at a high frequency, control...[Details]
The production process of lithium batteries does not mention the previous processes such as material preparation, winding, liquid injection, and packaging, but only talks about the final formation ...[Details]
The power consumption of a switching power supply includes fixed losses caused by parasitic resistances such as semiconductor switches, magnetic components, and wiring, as well as switching losses ...[Details]
1. Brief Introduction
With the continuous development and improvement of single-chip microcomputer technology, single-chip microcomputers have been widely used in all walks of life, and ...[Details]
As we all know, the manufacturing of modern automobiles is divided into four major processes: stamping, welding, painting and assembly, and the powertrain constitutes five inseparable production pr...[Details]
The platemaking machine is an indispensable device in platemaking and printing, and plays a very important role. The platemaking machine is a device used to make printing plates. The principle is c...[Details]
1 Introduction
The early stage control system used relay control. Due to the large number of stage equipment, the number of control elements is huge and the wiring is complicated. Therefore, th...[Details]
1. Don't say "Give me a code" as the first sentence when you see someone else's reply. You should think about why. When you figure it out yourself
and refer to other people
's
tips, you will...[Details]
1. Introduction
Industrial fieldbus technology is one of the technologies that has received the most attention in the automation industry in recent years, and it has brought a qualitative leap...[Details]
Typically, buck regulators are designed for continuous mode operation, which simplifies output voltage calculations and system design. However, if the system is non-synchronous and required to oper...[Details]
introduction
1 The significance of using RTOS on MSP430
It is understandable that it is meaningless to use RTOS on MSP430. Because the hardware resources of MSP430 are limited (for exampl...[Details]
High-frequency electrodeless lamp is a high-tech product that integrates electronic technology, vacuum science, power electricity, plasma science, magnetic material science and other disciplines. Elec...[Details]
The so-called constant current source is a power supply with a very stable output current, but this stability is relative, not absolutely unchanging, but its rate of change is so small that it can be ...[Details]
DSP and ARM Processors
京公网安备 11010802033920号
EEWORLD
