19013 36th Ave. West
Suite H
Lynnwood, WA 98036, USA
SM7745H Series
4 Pad 7 x 5mm Leadless Surface Mount Ceramic Clock Oscillator
CMOS with Enable/ Disable
Fundamental or 3rd Overtone Crystal Used
Standard Specifications
Overall Frequency Stability
Operating Temperature Range
Supply Voltage (Vcc)
Symmetry (Duty Cycle)
Logic Levels
Output Load
Enable/Disable Option (E/D)
SM7745H:
±
50 PPM, SM7744H:
±
25 PPM, SM7720H:
±
20 PPM over Operating Temp. Range
0 to +70°C is standard, but can be extended to
-
40 to +85°C for certain frequencies
5.0 volts, 3.3 volts and 2.5 volts available, .01 µF bypass cap recommended
40/60 to 60/40% is standard, but 45/55% at 50% of Vcc is also available (see Waveform 1)
Logic “1”
90% of Vcc MIN;
Logic “0”
10% of Vcc MAX
Standard load is 15pF maximum, see Test Circuit 2 (consult factory for
heavier
loads)
Output enabled when Pin #1 is open or at Logic “1”; Output disabled when Pin #1 is at Logic “0”.
Supply Current
Icc (mA) w/ 15pF load
Typical
Maximum
Rise and Fall Time
Tr & Tf (nS) w/ 15pF load
Typical
Maximum
1.500 MHz
–
69.999 MHz
Frequency Range
(MHz)
1.500
11.000
24.000
30.000
46.000
–
–
–
–
–
10.999
23.999
29.999
45.999
69.999
5.0
10.0
15.0
20.0
37.0
10.0
15.0
20.0
30.0
45.0
4.0
4.0
3.0
3.0
3.5
5.0
5.0
5.0
5.0
4.5
Part Numbering Guide
Packaging
Tray or
16mm tape
8mm pitch
SM77 45 H Y -- 50.0M - 30
Model
Frequency Stability
45 = ± 50 PPM
44 = ± 25 PPM
20 = ± 20 PPM
Non-Std Output Load
Blank = 15 pF max, 30 = 30 pF max, 50 = 50 pF max
Frequency in MHz
Special Specifications (choose all that apply)
Y: Std Specs (5.0V
± 10%,
0 to +70
°
C, 40/60% Symmetry)
E: Extended Operating Temperature Range (- 40 to +85
°
C)
S: 45/55% Symmetry at 50% of Vcc
V: Supply Voltage of 3.3 volts ±
10%
W: Supply Voltage of 2.5 volts ± 5%
Consult factory for available frequencies and specs. Not all options available for all frequencies. A special part number may be assigned.
Frequency Stability is inclusive of frequency shifts due to calibration, temperature, supply voltage, shock, vibration and load
Mechanical: inches (mm)
not to scale
Solder Pads
.09 (2.2)
Due to part size and factory abilities, part marking may vary from lot to lot and may contain our part number or an internal code.
GND
.276 (7.0 ± .2)
2
OUT
3
.200 (5.08)
.130 (3.3)
3
2
0.01
m
F
bypass capacitor
PLE
1
E/D
4
Vcc
4
1
.07 (1.8)
.197
(5.0 ± .2)
.075 (1.9)
MAX
.08 (2.0)
Feb 2002
Pl tronics, Inc.
(425) 776 -1880, Fax: (425) 776-2760, ple-sales@pletronics.com, www.pletronics.com
9
Electronics Design Contest
京公网安备 11010802033920号
EEWORLD
