The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
2.54mm Pitch Bottom Entry Type Connector
MDF7 Series
sFeatures
1. Board to Board Size Freely Settable
The board to board size can be set at infinite stages, according to the
header pin through type structure and the diverse header variation.
The board to board size can be set at infinite stages.
Board to Board size Freely settable
2. Integrity of Parts Mounted Surface
The parts mounted surface on two boards aren't face each other, and can
be oriented in the same direction.
3. Wide Variation
Single-row product, double-row product, tin plated and gold plated
products are lined up. In addition, the header to correspond to the board
to board size are prepared. Concerning board to board size, other
products can be provided, in addition to products in this catalog. Please
contact HRS company as required.
sApplications
Internal connection of telephone sets and OA/FA equipment, connection
between IPM, IGBT and the board.
A71
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will
Bottom Entry Type Connector
MDF7 Seriesq2.54mm Pitch
be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
sProduct
Specifications
Rating
Current rating: 3A
Operating Temperature Range: -30ç
to
+85ç(Note 1)
Storage Temperature Range: -10ç
to
+60ç (Note 2)
Storage Humidity Range: 40%
to
70%(Note 2)
Voltage rating: 250V AC Operating Humidity Range: 40%
to
80%
Item
1. Insulation Resistance
2. Withstanding voltage
3. Contact Resistance
5. Vibration
6.
Humidity (Steady state)
7. Temperature Cycle
8. Durability
(Mating/un-mating)
1000M
ohms
min.
Specification
500V DC
650V AC/1 minute
100mA
Condition
No flashover or insulation breakdown.
30m
ohms
max.
4. Single Insertion/Extraction Force MIN 0.4N(40gf), MAX 4.4N(450gf)
Measured by the square steel pin with 0.635±0.002mm
No electrical discontinuity of 1µs or more
Contact resistance: 30m
ohms
max.
Insulation resistance: 500M
ohms
min.
Contact resistance: 30m
ohms
max.
Insulation resistance: 1000M
ohms
min.
Contact resistance: 30m
ohms
max.
Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions.
96 hours at temperature of
40 ± 2ç and humidity of 90% to 95%
(-55ç: 30 minutes, 5
to
35ç: 10 minutes
(-85ç:
30 minutes, 5
to
35ç: 10 minutes) 5cycles
Tin plating
Gold plating
: 30 cycles
: 50 cycles
9. Resistance to Soldering heat
No deformation of components affecting performance.
Flow: 260ç for 10 seconds
Manual soldering: 350ç for 3 seconds
Note 1: Includes temperature rise caused by current flow.
Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature
Range and Humidity range covers non conducting condition of installed connectors in storage, shipment or during
transportation.
Note 3: Information contained in this catalog represents general requirements for this Series. Contact us for the drawings and specifications for
a specific part number shown.
sMaterial
Product
Receptacle
Pin Header
Part
Insulator
Contact
Insulator
Contact
Material
Polyamide
Phosphor bronze
PBT
Brass
Finish
Black
Tin plated or gold plated
Main unit: Black/Locator: Gray
Tin plated or gold plated
Remarks
UL94V-0
–––––––
UL94V-0
–––––––
sOrdering
Information
MDF7
q
q
Series Name
e
Connector Type
S : Single row receptacle
-
*
S - 2.54 DSA
w
e
r
t
: 2.54mm
r
Contact Pitch
t
Contact type
DSA: Straight through hole
DS : Right Angle through hole
: MDF7
w
Number of contacts : 3
to
46
D : Double row receptacle
P : Single row pin header
DP: Double row pin header
A72
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your
Note: The quantity for delivery is determined per pack (100 pcs.). If needed, please order the products per pack.
A
38.1
40.64
43.18
45.72
48.26
50.8
53.34
55.88
58.42
60.96
63.5
Unit: mm
B RoHS
35.56
38.1
40.64
43.18
45.72
48.26 YES
50.8
53.34
55.88
58.42
60.96
sDouble
Row Receptacle
Unit: mm
Number of Contacts
Part Number
CL No.
A
B
RoHS
[Specific No.]
–
* *
,
(*
*)
(Note 2)
15.24 12.7
12
MDF7-12D-2.54DSA(**) 547-0032-1-**
(55)
:Tin plated
(56)
:Gold plated
17.78 15.24
14
MDF7-14D-2.54DSA(**) 547-0354-8-**
20.32 17.78
16
MDF7-16D-2.54DSA(**) 547-0363-9-**
25.4 22.86
20
MDF7-20D-2.54DSA(**) 547-0033-4-**
27.94 25.4
22
MDF7-22D-2.54DSA(**) 547-0246-5-**
30.48 27.94
24
MDF7-24D-2.54DSA(**) 547-0244-0-**
YES
33.02 30.48
26
MDF7-26D-2.54DSA(**) 547-0247-8-**
38.1 35.56
30
MDF7-30D-2.54DSA(**) 547-0016-5-**
43.18 40.64
34
MDF7-34D-2.54DSA(**) 547-0227-0-**
50.8 48.26
40
MDF7-40D-2.54DSA(**) 547-0228-3-**
58.42 55.88
46
MDF7-46D-2.54DSA(**) 547-0229-6-**
60.46 58.42
48
MDF7-48D-2.54DSA(**) 547-0060-7-**
Note 1: A quantity for delivery is determined per pack (100 pcs.). If needed, please order the products per pack.
Note 2: The MDF7 series 2-row plating specification is different from the single-row plating specification.
No-specification indicates the gold plating, and (01) indicates the tin plating.
A73
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will
Bottom Entry Type Connector
MDF7 Seriesq2.54mm Pitch
be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
sSingle
Row Straight Pin Header
[Specific No.]
–
* *
,
(*
*)
(55)
:Tin plated
(01)
:Gold plated
qBoard
Through-hole Diameter:
Ø1.0
+
0.1
+
0
[without locator]
[with locator]
qMDF7(Board
to Board Size: 2.54 to 5.5mm)
Part Number
CL No.
Number of Contacts
3
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
A
B
MDF7- 3P-2.54DSA(**) 547-0220-1-**
MDF7- 5P-2.54DSA(
**
) 547-0113-1-**
MDF7- 6P-2.54DSA(**) 547-0130-0-**
MDF7- 7P-2.54DSA(
**)
547-0148-6-**
MDF7- 8P-2.54DSA(
**)
547-0149-9-**
MDF7- 9P-2.54DSA(**) 547-0150-8-**
MDF7-10P-2.54DSA(**) 547-0039-0-**
MDF7-11P-2.54DSA(
**)
547-0151-0-**
MDF7-12P-2.54DSA(**) 547-0043-8-**
MDF7-13P-2.54DSA(**) 547-0152-3-**
MDF7-14P-2.54DSA(
**
) 547-0153-6-**
MDF7-15P-2.54DSA(**) 547-0018-0-**
MDF7-16P-2.54DSA(**) 547-0111-6-**
NDF7-17P-2.54DSA(
**)
547-0154-9-**
MDF7-18P-2.54DSA(**) 547-0022-8-**
MDF7-19P-2.54DSA(**) 547-0155-1-**
MDF7-20P-2.54DSA(
**
) 547-0123-5-**
MDF7-21P-2.54DSA(**) 547-0156-4-**
MDF7-22P-2.54DSA(**) 547-0157-7-**
MDF7-23P-2.54DSA(
**)
547-0158-0-**
MDF7-24P-2.54DSA(**) 547-0159-2-**
MDF7-25P-2.54DSA(**) 547-0023-0-**
7.62 5.08
15.24 12.7
Unit: mm
C
10
10
RoHS
qMDF7B
(Board to Board Size 2.54 to 12mm)
Part Number
CL No.
Number of Contacts
3
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
A
B
MDF7B- 3P-2.54DSA(**) 547-0304-0-**
MDF7B- 5P-2.54DSA(**) 547-0133-9-**
MDF7B- 6P-2.54DSA(**) 547-0131-3-**
MDF7B- 7P-2.54DSA(**) 547-0177-4-**
MDF7B- 8P-2.54DSA(**) 547-0178-7-**
MDF7B- 9P-2.54DSA(**) 547-0179-0-**
MDF7B-10P-2.54DSA(**) 547-0048-1-**
MDF7B-11P-2.54DSA(**) 547-0047-9-**
MDF7B-12P-2.54DSA(**) 547-0041-2-**
MDF7B-13P-2.54DSA(**) 547-0180-9-**
MDF7B-14P-2.54DSA(**) 547-0181-1-**
MDF7B-15P-2.54DSA(**) 547-0024-3-**
MDF7B-16P-2.54DSA(**) 547-0182-4-**
MDF7B-17P-2.54DSA(**) 547-0183-7-**
MSD7B-18P-2.54DSA(**) 547-0025-6-**
MDF7B-19P-2.54DSA(**) 547-0184-0-**
MDF7B-20P-2.54DSA(**) 547-0052-9-**
MDF7B-21P-2.54DSA(**) 547-0185-2-**
MDF7B-22P-2.54DSA(**) 547-0186-5-**
MDF7B-23P-2.54DSA(**) 547-0066-3-**
MDF7B-24P-2.54DSA(**) 547-0067-6-**
MDF7B-25P-2.54DSA(**) 547-0026-9-**
Unit: mm
C
RoHS
7.62 5.08 16.46
12.7 10.16 16.46
15.24 12.7 16.46
17.78 15.24 16.46
20.32 17.78 16.46
22.86 20.32 16.46
25.4 22.86 16.46
27.94 25.4 16.46
30.48 27.94 16.46
33.02 30.48 16.46
35.56 33.02 16.46
38.1 35.56 16.46
40.64 38.1 16.46
43.18 40.64 16.46
45.72 43.18 16.46
48.26 45.72 16.46
50.8 48.26 16.46
53.34 50.8 16.46
55.88 53.34 16.46
58.42 55.88 16.46
60.96 58.42 16.46
63.5 60.96 16.46
YES
12.7 10.16 10
17.78 15.24 10
20.32 17.78 10
22.86 20.32 10
25.4 22.86 10
27.94 25.4
10
30.48 27.94 10
33.02 30.48 10
35.56 33.02 10
38.1 35.56 10
40.64 38.1
10
43.18 40.64 10
45.72 43.18 10
48.26 45.72 10
50.8 48.26 10
53.34 50.8
10
55.88 53.34 10
58.42 55.88 10
60.96 58.42 10
63.5 60.96 10
YES
Note 1: The board to board size in the above table represents the case where the 1.6mm thickness board is used.
Note 2: The quantity for delivery is determined per pack (100 pcs.). If needed, please order the products per pack.
A74
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your
Type Connector
MDF7 Seriesq2.54mm Pitch Bottom Entry
Hirose sales representative.
qMDF7P
(Board to Board Size 2.54 to 8mm)
Unit: mm
Part Number
MDF7P- 3P-2.54DSA(**)
MDF7P- 5P-2.54DSA(**)
MDF7P- 6P-2.54DSA(**)
MDF7P- 7P-2.54DSA(**)
MDF7P- 8P-2.54DSA(**)
MDF7P- 9P-2.54DSA(**)
MDF7P-11P-2.54DSA(**)
MDF7P-13P-2.54DSA(**)
CL No.
–––––––
–––––––
–––––––
–––––––
–––––––
–––––––
–––––––
–––––––
Number of Contacts
3
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
A
B
C
RoHS
qMDF7C
(Board to Board Size 5.08 to 15mm,with Locator)
Unit: mm
Part Number
MDF7C- 3P-2.54DSA(**)
CL No.
–––––––
Number of Contacts
3
5
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
A
B
C RoHS
7.62 5.08 19.46
12.7 10.16 19.46
17.78 15.24 19.46
20.32 17.78 19.46
22.86 20.32 19.46
25.4 22.86 19.46
27.97 25.4 19.46
30.48 27.94 19.46
33.02 30.48 19.46
35.56 33.02 19.46
38.1 35.56 19.46 YES
40.64 38.1 19.46
43.18 40.64 19.46
45.72 43.18 19.46
48.26 45.72 19.46
50.8 48.26 19.46
53.34 50.8 19.46
55.88 53.34 19.46
58.42 55.88 19.46
60.96 58.42 19.46
63.5 60.96 19.46
7.62 5.08 12.5
12.7 10.16 12.5
15.24 12.7
12.5
17.78 15.24 12.5
20.32 17.78 12.5
22.86 20.32 12.5
25.4 22.86 12.5
27.94 25.4
12.5
30.48 27.94 12.5
33.02 30.48 12.5
35.56 33.02 12.5
38.1 35.56 12.5
40.64 38.1
12.5
43.18 40.46 12.5
45.72 43.18 12.5
48.26 45.72 12.5
50.8 48.26 12.5
53.34 50.8
12.5
55.88 53.34 12.5
58.42 55.88 12.5
60.96 58.42 12.5
63.5 60.96 12.5
YES
MDF7C- 5P-2.54DSA(**) 547-0344-4-**
MDF7C- 7P-2.54DSA(**) 547-0378-6-**
MDF7C- 8P-2.54DSA(**) 547-0375-8-**
MDF7C- 9P-2.54DSA(**)
MDF7C-10P-2.54DSA(**)
MDF7C-12P-2.54DSA(**)
–––––––
–––––––
–––––––
MDF7P-10P-2.54DSA(**) 547-0360-0-**
MDF7P-12P-2.54DSA(**) 547-0345-7-**
MDF7P-14P-2.54DSA(**) 547-0385-1-**
MDF7P-15P-2.54DSA(**) 547-0230-5-**
MDF7P-16P-2.54DSA(**) 547-0346-0-**
MDF7P-17P-2.54DSA(**)
MDF7P-18P-2.54DSA(**)
MDF7P-20P-2.54DSA(**)
MDF7P-21P-2.54DSA(**)
MDF7P-22P-2.54DSA(**)
MDF7P-23P-2.54DSA(**)
MDF7P-24P-2.54DSA(**)
–––––––
–––––––
–––––––
–––––––
–––––––
–––––––
–––––––
MDF7C-11P-2.54DSA(**) 547-0376-0-**
MDF7C-13P-2.54DSA(**) 547-0401-6-**
MDF7C-14P-2.54DSA(**) 547-0380-8-**
MDF7C-15P-2.54DSA(**)
MDF7C-16P-2.54DSA(**)
MDF7C-17P-2.54DSA(**)
–––––––
–––––––
–––––––
MDF7C-18P-2.54DSA(**) 547-0029-7-**
MDF7C-19P-2.54DSA(**) 547-0361-3-**
MDF7C-20P-2.54DSA(**) 547-0198-4-**
MDF7C-21P-2.54DSA(**)
MDF7C-22P-2.54DSA(**)
MDF7C-23P-2.54DSA(**)
MDF7C-24P-2.54DSA(**)
–––––––
–––––––
–––––––
–––––––
MDF7P-19P-2.54DSA(**) 547-0347-2-**
MDF7C-25P-2.54DSA(**) 547-0305-2-**
MDF7P-25P-2.54DSA(**) 547-0348-5-**
Note 1: The board to board size in the above table represents the case where the 1.6mm thickness board is used.
Note 2: A quantity for delivery is determined per pack (100 pcs.). If needed, please order the products per pack.
Note 3: As for the products, which HRS No. is not indicated in the above table, we will correspond to samples, and mass-production
according to your demand. Please contact HRS company, as required.
Android SDK does not include JNI support, and there is no documentation on how to support JNI. However, since the entire Android platform is open source, we can find some clues through the source code...
Why are the tools in the development package all source code? They will crash after compiling...I don't have any programming tools other than Keil on my computer. Could someone please give me a usable...
Dear experts, I recently used AD9 to draw several hierarchical schematics. When compiling, I found some problems. I hope you can give me some advice. 1. When the top-level schematic (which is full of ...
launchpadg2553ADC10 multi-channel (two-channel) program uses 1602 display. Its driver program will not be repeated here. The main program is given directly, and the user can configure the LCD program ...
[i=s]This post was last edited by wo4fisher on 2018-9-27 22:35[/i] 1. Off topic: I had no plan to apply for this evaluation activity, but I received multiple email reminders, and I may use similar dev...
Current Development Status of DVR Market
A DVR, or digital video recorder, uses a hard disk for recording, unlike traditional analog video recorders. It's often called a DVR because it's a com...[Details]
In mobile technology, sensors are the primary input for measured signals and form a component of a sensor system. They include sensitive and transducer elements connected to carriers and circuits. ...[Details]
One of the most core components of electric vehicles is the motor. The power supply provides electrical energy to the motor, which converts this electrical energy into mechanical energy, which in t...[Details]
Linear motor modules have become the "sweet spot" in various fields due to their advantages such as long stroke, fast speed, high precision, smooth operation and long life. Different models of line...[Details]
My career has been closely tied to the semiconductor industry. From product management to content marketing, I've provided countless forecasts and predictions across a variety of roles. Whethe...[Details]
China, August 21, 2025 – STMicroelectronics (NYSE: STM), a world-leading semiconductor company serving a wide range of electronics applications, has published its IFRS 2025 semi-annual financial re...[Details]
From time to time, I see some audiophiles spending a lot of money or a lot of time to DIY speakers, but the results are not what they want. Below I list some of the small experiences I summarized b...[Details]
introduction
The rapid adoption of computers has led to a growing number of tasks being performed on them. People from all walks of life, especially programmers and writers, are spending incre...[Details]
The mobile computing market is rapidly evolving, and manufacturers are fiercely competing for market share. A key area of competition is battery life, which encompasses two key aspects: how long th...[Details]
0 Introduction
With a rapidly aging population, a young couple is now required to care for an increasing number of elderly people, leading to a growing difficulty in providing care for them. E...[Details]
We know that the power output by the engine does not directly act on the wheels to drive the car, but needs to pass through a series of power transmission mechanisms. So how is the power transmitte...[Details]
Servo motors, also known as actuator motors, serve as actuators in automatic control systems, converting received electrical signals into angular displacement or angular velocity output on the moto...[Details]
A graphics processor (GPU), also known as a display core, visual processor, or display chip, is a microprocessor specialized for image processing on personal computers, workstations, game consoles,...[Details]
Abstract: This design uses field-effect transistors to create a tube-like audio power amplifier. The preamplifier uses a single Class A transistor, while the power stage utilizes Class AB push-pull...[Details]
On August 14th, Zhiyuan
Robotics
officially
open-sourced
its world model, GenieEnvisioner (GE), unveiled in July
, and once again promoted the concept of "the industry's first world ...[Details]
_pdf/pg_0001.png)
Embedded System
京公网安备 11010802033920号
EEWORLD_pdf/1.png)
_pdf/2.png)
_pdf/3.png)
_pdf/4.png)
_pdf/5.png)
_pdf/pg_0002.png)
_pdf/pg_0003.png)
_pdf/pg_0004.png)
_pdf/pg_0005.png)
