VFCP Series (0805, 1206, 1506, 2010, 2512) (Z-Foil)
Vishay Foil Resistors
Ultra High Precision Z-Foil Flip Chip Resistor with TCR
of ± 0.05 ppm/°C, 35 % Space Saving vs. Wraparound Design
and PCR of 5 ppm at Rated Power
Temperature coefficient of resistance (TCR):
± 0.05 ppm/°C typical (0 °C to + 60 °C)
± 0.2 ppm/°C typical (- 55 °C to + 125 °C,
+ 25 °C ref.)
Tolerance: to ± 0.01 % (100 ppm)
Power coefficient “R due to self heating”
5 ppm at rated power
Load life stability (70 °C for 2000 h): ± 0.005 % (50 ppm)
Power rating to: 600 mW at + 70 °C
Electrostatic discharge (ESD) up to 25 000 V
Resistance range: 10
to 125 k(for lower and higher
values, please contact us)
Foil resistors are not restricted to standard values; specific
“as required” values can be supplied at no extra cost or
delivery (e.g. 1K2345 vs. 1K)
Non-inductive, non-capacitive design
Short time overload 0.005 % (50 ppm)
Non hot spot design
Rise time: 1 ns effectively no ringing
Current noise: - 40 dB
Voltage coefficient < 0.1 ppm/V
Non-inductive: < 0.08 µH
Terminal finishes available: lead (Pb)-free, tin/lead alloy
Compliant to RoHS directive 2002/95/EC
Matched sets are available per request
Prototype quantities available in just 5 working days
or sooner. For more information, please contact
foil@vishaypg.com
For better performances please contact us
FEATURES
Bottom View
INTRODUCTION
One of the most important parameters influencing stability is
the temperature coefficient of resistance (TCR). Although the
TCR of Bulk Metal
®
Foil resistors is considered extremely
low, this characteristic has been further refined over the
years.
The VFCP Series utilizes ultra precision Bulk Metal
®
Z-Foil.
The Z-Foil technology provides a significant reduction to the
resistive element’s sensitivity to ambient temperature
variations (TCR) and to self heating when power is applied
(power coefficient).
Along with the inherently low PCR and TCR, Z-Foil
technology also provides remarkably improved load life
stablility, low noise and availability of tight tolerance.
IM
PR
O
VE
D
The flip chip configuration provides a substantial PCB space
saving of more than 35 % vs. a surface mount chip with
wraparound terminations. The VFCP is available in any
value within the specified resistance range.
Our application engineering department is available to
advise and make recommendations. For non-standard
technical requirements and special applications, please
contact us.
TABLE 1 - TOLERANCE AND TCR VS.
RESISTANCE VALUE
RESISTANCE
VALUE
()
250to 125K
TOLERANCE
(%)
± 0.01
TYPICAL TCR AND
MAX. SPREAD
(- 55 °C to + 125 °C,
+ 25 °C Ref.)
± 0.2 ± 1.6
Percent of Rated Power
100to < 250
50to < 100
25to < 50
± 0.02
± 0.2 ± 1.6
± 0.05
± 0.1
± 0.2 ± 1.8
± 0.2 ± 2.8
10to < 25
± 0.25
± 0.2 ± 2.8
* Pb containing terminations are not RoHS compliant, exemptions may apply
Document Number: 63106
Revision: 25-Mar-10
For any questions, contact:
foil@vishaypg.com
www.foilresistors.com
1
PR
O
DU
CT
APPLICATIONS
Automatic test equipment (ATE)
High precision instrumentation
Laboratory, industrial and medical
Audio
EB applications (electron beam scanning and recording
equipment, electron microscopes)
Military and space
Airborne
Down hole instrumentation
Communication
FIGURE 1 - POWER DERATING CURVE
- 55 °C
100
75
50
25
0
- 75
+ 70 °C
- 50
- 25
0
+ 25
+ 50
+ 75 + 100 + 125 + 150 + 175
Ambient Temperature (°C)
VFCP Series (0805, 1206, 1506, 2010, 2512) (Z-Foil)
Vishay Foil Resistors
FIGURE 2 - TRIMMING TO VALUES
(Conceptual Illustration)
Mutual Inductance
Reduction due
to Change in
Current Direction
Note:
Foil shown in
black,
etched spaces in
white
TABLE 2 - SPECIFICATIONS
CHIP
SIZE
0805
1206
1506
RATED
POWER
(mW)
at + 70 °C
100 mW
250 mW
300 mW
MAXIMUM
VOLTAGE
RATING
(
P
R
)
28 V
79 V
95 V
167 V
220 V
RESISTANCE
RANGE ()
10to 8K
10to 25K
10to 30K
10to 70K
MAXIMUM
WEIGHT
(mg)
5.2
10.3
12
25
IM
PR
O
VE
D
2010
2512
400 mW
600 mW
10to 125K
35
TABLE 4 - PERFORMANCES
TEST OR CONDITION
MIL-PRF-55342
CHARACTERISTIC E
R
LIMITS
± 0.1 %
Thermal Shock
Low Temperature Operation
Short Time Overload
± 0.1 %
± 0.1 %
High Temperature Exposure
± 0.1 %
Resistance to Soldering Heat
Moisture Resistance
± 0.2 %
± 0.2 %
Load Life Stability + 70 °C for 2000 hours
at Rated Power
± 0.5 %
Note
(1)
As shown + 0.01 W to allow for measurement errors at low values.
www.foilresistors.com
2
For any questions, contact:
foil@vishaypg.com
PR
O
DU
CT
Current Path
After Trimming
Trimming Process
Removes this Material
from Shorting Strip Area
Changing Current Path
and Increasing
Resistance
Interloop Capacitance
Reduction in Series
Current Path
Before Trimming
TABLE 3 - LOAD LIFE STABILITY
(+ 70 °C for 2000 h)
CHIP SIZE
0805
1206
1506
2010
2512
MAXIMUMR LIMITS
± 0.005 % at 50 mW
± 0.01 % at 100 mW
± 0.005 % at 150 mW
± 0.01 % at 250 mW
± 0.005 % at 150 mW
± 0.01 % at 300 mW
± 0.005 % at 200mW
± 0.01 % at 400 mW
± 0.005 % at 500 mW
± 0.01 % at 600 mW
TYPICAL
R
LIMITS
± 0.005 % (50 ppm)
± 0.005 % (50 ppm)
± 0.005 % (50 ppm)
± 0.01 % (100 ppm)
± 0.005 % (50 ppm)
± 0.005 % (50 ppm)
± 0.005 % (50 ppm)
MAXIMUM
R
LIMITS
(1)
± 0.01 % (100 ppm)
± 0.01 % (100 ppm)
± 0.01 % (100 ppm)
± 0.02 % (200 ppm)
± 0.015 % (150 ppm)
± 0.02 % (200 ppm)
± 0.01 % (100 ppm)
Document Number: 63106
Revision: 25-Mar-10
VFCP Series (0805, 1206, 1506, 2010, 2512) (Z-Foil)
Vishay Foil Resistors
TABLE 5 - DIMENSIONS AND LAND PATTERN
in inches (millimeters)
BOTTOM VIEW (showing terminals for mounting)
D
Solder Terminals
LAND PATTERN
W
W1 [W - 0.003"]
L - 0.005 (0.13)
L
CHIP
SIZE
0805
1206
1506
2010
2512
Notes
•
•
•
L
± 0.005 (0.13)
0.079 (2.01)
0.126 (3.20)
0.150 (3.81)
0.200 (5.08)
0.250 (6.35)
W
± 0.005 (0.13)
0.049 (1.24)
0.062 (1.57)
0.062 (1.57)
0.100 (2.54)
0.126 (3.20)
THICKNESS
MAXIMUM
0.025 (0.64)
0.025 (0.64)
0.025 (0.64)
0.025 (0.64)
0.025 (0.64)
IM
PR
O
VE
D
Avoid the use of cleaning agents which could attack epoxy resins, which form part of the resistor construction
Vacuum pick up is recommended for handling
Soldering iron is not applicable
FIGURE 3 - CHIP CONFIGURATION
High Purity Alumina Substrate
Resistive
Bulk
®
Metal Foil
Solder
Protective Coating
Document Number: 63106
Revision: 25-Mar-10
For any questions, contact:
foil@vishaypg.com
PR
O
DU
CT
G
X
Z
D
± 0.005 (0.13)
0.010 (0.25)
0.015 (0.38)
0.012 (0.30)
0.020 (0.51)
0.024 (0.61)
Z
G
X
0.078 (1.98)
0.125 (3.18)
0.150 (3.81)
0.199 (5.05)
0.250 (6.35)
0.053 (1.35)
0.090 (2.29)
0.120 (3.05)
0.153 (3.89)
0.196 (4.98)
0.049 (1.24)
0.062 (1.57)
0.062 (1.57)
0.100 (2.54)
0.126 (3.20)
FIGURE 4 - TYPICAL RESISTANCE/
TEMPERATURE CURVE
(for more details, see table 1)
+ 500
+ 400
+ 300
+ 200
+ 100
ΔR
0
R
(ppm)
- 100
- 200
- 300
- 400
- 500
- 55
- 25
0
+ 25
+ 60 + 75
+ 100 + 125
- 0.16 ppm/°C
0.05 ppm/°C
- 0.1 ppm/°C
0.1 ppm/°C
0.14 ppm/°C
0.2 ppm/°C
Ambient Temperature (°C) and TCR Chord Slopes for
Differetn Termperature Ranges
Note
• The TCR values for < 100
are influenced by the termination
composition and result in deviation from this curve
www.foilresistors.com
3
VFCP Series (0805, 1206, 1506, 2010, 2512) (Z-Foil)
Vishay Foil Resistors
TABLE 6 - GLOBAL PART NUMBER INFORMATION
(1)
NEW GLOBAL PART NUMBER: Y163010K0000T9W (preferred part number format)
DENOTES PRECISION
Y
VALUE
R
=
K
= k
CHARACTERISTICS
0
= standard
9
= lead (Pb)-free
1 to 999
= custom
Y
1
6
3
0
1
0
PRODUCT CODE
1629
= VFCP0805
1630
= VFCP1206
1631
= VFCP1506
1632
= VFCP2010
1633
= VFCP2512
RESISTANCE TOLERANCE
T
= ± 0.01 %
Q
= ± 0.02 %
A
= ± 0.05 %
B
= ± 0.10 %
C
= ± 0.25 %
D
= ± 0.50 %
F
= ± 1.00 %
FOR EXAMPLE: ABOVE GLOBAL ORDER Y1630 10K0000 T 9 W:
TYPE: VFCP1206
VALUE: 10.0 k
ABSOLUTE TOLERANCE: ± 0.01 %
TERMINATION: lead (Pb)-free
PACKAGING: waffle pack
HISTORICAL PART NUMBER: VFCP1206 10K000 TCR0.2 T S W (will continue to be used)
VFCP1206
MODEL
VFCP0805
VFCP1206
VFCP1506
VFCP2010
VFCP2512
10K000
OHMIC VALUE
10.0 k
TCR0.2
TCR
Characteristic
T
IM
PR
O
VE
D
Note
(1)
For non-standard requests, please contact application engineering.
www.foilresistors.com
4
For any questions, contact:
foil@vishaypg.com
PR
O
DU
CT
K
0
0
0
0
T
9
W
PACKAGING
R
= tape and reel
W
= waffle pack
S
W
RESISTANCE
TOLERANCE
T
= ± 0.01 %
Q
= ± 0.02 %
A
= ± 0.05 %
B
= ± 0.10 %
C
= ± 0.25 %
D
= ± 0.50 %
F
= ± 1.00 %
TERMINATION
S
= lead (Pb)-free
B
= tin/lead
PACKAGING
T
= tape and reel
W
= waffle pack
Document Number: 63106
Revision: 25-Mar-10
Legal Disclaimer Notice
Vishay Precision Group
Disclaimer
ALL PRODUCTS, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE.
Vishay Precision Group, Inc., its affiliates, agents, and employees, and all persons acting on its or their
behalf (collectively, “Vishay Precision Group”), disclaim any and all liability for any errors, inaccuracies or
incompleteness contained herein or in any other disclosure relating to any product.
The product specifications do not expand or otherwise modify Vishay Precision Group’s terms and
conditions of purchase, including but not limited to, the warranty expressed therein.
Vishay Precision Group makes no warranty, representation or guarantee other than as set forth in the terms
and conditions of purchase.
To the maximum extent permitted by applicable law, Vishay Precision
Group disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and
all liability, including without limitation special, consequential or incidental damages, and (iii) any and
all implied warranties, including warranties of fitness for particular purpose, non-infringement and
merchantability.
Information provided in datasheets and/or specifications may vary from actual results in different
applications and performance may vary over time. Statements regarding the suitability of products for
certain types of applications are based on Vishay Precision Group’s knowledge of typical requirements that
are often placed on Vishay Precision Group products. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular
application.
No license, express, implied, or otherwise, to any intellectual property rights is granted by this document, or
by any conduct of Vishay Precision Group.
The products shown herein are not designed for use in life-saving or life-sustaining applications unless
otherwise expressly indicated. Customers using or selling Vishay Precision Group products not expressly
indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay
Precision Group for any damages arising or resulting from such use or sale. Please contact authorized
Vishay Precision Group personnel to obtain written terms and conditions regarding products designed for
such applications.
Product names and markings noted herein may be trademarks of their respective owners.
Document No.: 63999
Revision: 27-Apr-2011
www.vishaypg.com
1
Test/Measurement
京公网安备 11010802033920号
EEWORLD
