SHORT CIRCUIT AND OVERLOAD PROTECTION FOR ALL DEVICES
(Conforming to the IEC60947-4-2 and UL508)
IEC standard 60947-4-1
make a distinction between two different types of protection, (called “coordination”), which are designated types “1” and "2".
Any short-circuit that occurs is cleared safely by either type of coordination.
The only difference between the 2 categories concerns the extent of the SSR damage caused by the short-circuit.
Type "1"
coordination requires that in the event of a short-circuit, the Solid State Contactor does not endanger personnel or installations,
but permanent damage to the SSC is permissible. In this case the SSC may need to be replaced. For this type of co-ordination,
the use of fusing or circuit breakers adequate to protect the system and wiring from short circuits, (but not specifically considering SSC protection), can be used.
Type "2"
coordination requires that under a short-circuit condition, the circuit is interrupted, the SSC does not endanger persons or installations,
and in addition the SSR will be able to operate after the fault condition is repaired.
Type of coordination 1
Solid State Contactor
Protection by Thermal Magnetic Circuit Breaker
Nominal Motor
Current
0.40-0.63 A
0.63-1 A
1-1.6 A
1.6-2.5 A
2.5-4 A
4-6.3 A
6.3-10 A
Thermal Magnetic Circuit Breaker
(Schneider Electric)
GV2ME04 / GV2P04
GV2ME05 / GV2P05
GV2ME06 / GV2P06
GV2ME07 / GV2P07
GV2ME08 / GV2P08
GV2ME10 / GV2P10
GV2ME14 / GV2P14
Solid State Contactor
2 controlled legs
DRC3Pxxx4xxx2
DRC3Pxxx4xxx2
DRC3Pxxx4xxx2
DRC3Pxxx4xxx2
DRC3Pxxx4xxx2
DRC3Pxxx4xxx2
DRC3Pxxx4xxx2 (up to 7.6A)
Solid State Contactor
3 controlled legs
DRC3Pxxx4xxx
DRC3Pxxx4xxx
DRC3Pxxx4xxx
DRC3Pxxx4xxx
DRC3Pxxx4xxx
DRC3Pxxx4xxx (up to 4.8A)
-
Solid State Contactor
Reversing
DRC3Rxxx4xx
DRC3Rxxx4xx
DRC3Rxxx4xx
DRC3Rxxx4xx
DRC3Rxxx4xx
DRC3Rxxx4xx
DRC3Rxxx4xx (up to 7.6A)
Protection by overload relays and fuses
Nominal Motor
Current
0.40-0.63 A
0.63-1 A
1-1.6 A
1.6-2.5 A
2.5-4 A
4-6.3 A
6.3-10 A
Overload Relay
(Schneider Electric)
LRD04
LRD05
LRD06
LRD07
LRD08
LRD10
LRD14
Class gG fuses
(example from Littlefuse)
CY14X51G16
CY14X51G16
CY14X51G25
CY14X51G25
CY14X51G25
CY14X51G40
CY14X51G40
Solid State Contactor
2 controlled legs
DRC3Pxxx4xxx2
DRC3Pxxx4xxx2
DRC3Pxxx4xxx2
DRC3Pxxx4xxx2
DRC3Pxxx4xxx2
DRC3Pxxx4xxx2
DRC3Pxxx4xxx2 (up to 7.6A)
Solid State Contactor
3 controlled legs
DRC3Pxxx4xxx
DRC3Pxxx4xxx
DRC3Pxxx4xxx
DRC3Pxxx4xxx
DRC3Pxxx4xxx
DRC3Pxxx4xxx (up to 4.8A)
-
Solid State Contactor
Reversing
DRC3Rxxx4xx
DRC3Rxxx4xx
DRC3Rxxx4xx
DRC3Rxxx4xx
DRC3Rxxx4xx
DRC3Rxxx4xx
DRC3Rxxx4xx (up to 7.6A)
Type of coordination 2
Protection by overload relays and fuses
Nominal Motor Overload Relay
Semiconductor fuses with less than 1621A2S
Solid State Contactor
(Schneider Electric) Littlefuse SIBA (Cylindric) Ferraz (Cylindric) 2 controlled legs
Current
0.40-0.63 A
0.63-1 A
1-1.6 A
1.6-2.5 A
2.5-4 A
4-6.3 A
6.3-10 A
LRD04
LRD05
LRD06
LRD07
LRD08
LRD10
LRD14
LA50QS40-4
LA50QS40-4
LA50QS40-4
LA50QS40-4
LA50QS40-4
LA50QS40-4
LA50QS40-4
50.058.06.40
50.058.06.40
50.058.06.40
50.058.06.40
50.058.06.40
50.058.06.40
50.058.06.40
A093909
A093909
A093909
A093909
A093909
A093909
A093909
DRC3Pxxx4xxx2
DRC3Pxxx4xxx2
DRC3Pxxx4xxx2
DRC3Pxxx4xxx2
DRC3Pxxx4xxx2
DRC3Pxxx4xxx2
DRC3Pxxx4xxx2 (up to 7.6A)
Solid State Contactor
3 controlled legs
DRC3Pxxx4xxx
DRC3Pxxx4xxx
DRC3Pxxx4xxx
DRC3Pxxx4xxx
DRC3Pxxx4xxx
-
Solid State Contactor
Reversing
DRC3Rxxx4xx
DRC3Rxxx4xx
DRC3Rxxx4xx
DRC3Rxxx4xx
DRC3Rxxx4xx
DRC3Rxxx4xx (up to 7.6A)
DRC3Pxxx4xxx (up to 4.8A) DRC3Rxxx4xx
Note:
All the Schneider Electric Thermal magnetic circuit breakers GV2 family (GV2ME and GV2P) is fully mechanical compatible with the DRC contactor using the GV2AF3 connection block.
All the Schneider Electric Overload relay LRD family is fully mechanical compatible with the DRC contactor without the need of any adapter.
The DRC Series can accept the LAD7C1 module (pre-wiring kit allowing direct connection of the NC contact of relay LRD to the contactor)
When the LAD7C1 module is used, the common terminal for the control input is not anymore the ”A2” terminal of DRC but it is the “96” terminal of the overload relay.
Recently I have been dealing with domestic substitution plans. Although the plans are there, the domestic chip production capacity is insufficient and there is no supply.
So I have always had a questi...
The Model 2510 is programmed based on a given temperature sensor TEC cooler and sets a single point temperature. The AC resistance of the TEC is first measured and displayed before the controller stab...
One frequency is 32768Hz and the other is 32786.885Hz. If these two frequencies are used as clocks, how big is the error of the second frequency? How to calculate it?
Please help me answer this questi...
[i=s]This post was last edited by jameswangsynnex on 2015-3-3 20:02[/i]This electronic fly killer is simple and easy to make, and can kill all flies that fly onto the fly killer's electric grid.The ci...
USB TYPE-C is two words. First, USB, which means it is an interface standard released by the USB-IF organization. Second, TYPE-C. C is the version number of the physical form of the interface, which i...
If the ultimate form of a car is a silicon-based life form, then in
the field of
intelligent driving
, it has gradually taken on the appearance of a "veteran driver." In
the field of
the ...[Details]
How do you know if a machine is operating properly? The answer: by leveraging deep learning to detect anomalies in routine vibration data from industrial machines. Anomaly detection has many uses, ...[Details]
Nios II is a configurable 16-/32-bit RISC processor. Combined with a rich set of peripheral-specific instructions and hardware acceleration units, it provides a highly flexible and powerful SOPC sy...[Details]
1. Project Overview
1.1 Introduction
Currently, most music files are saved in MP3 format, a lossy audio compression format that cannot perfectly reproduce the original music. With the exp...[Details]
As the number of cars increases, environmental pressures are also increasing. At this time, some people are saying that new energy vehicles are energy-efficient and environmentally friendly, and ar...[Details]
For autonomous vehicles to safely navigate the road, they must identify far more complex objects than just traffic lights, pedestrians, and other familiar objects. Among these obstacles is a crucia...[Details]
1. Fault phenomenon and cause analysis
1. During the operation of the equipment, the expansion sleeve is subjected to a large torque, and the mating surfaces of the shaft and the sleeve move...[Details]
"We have successfully launched the first version of our dedicated chip for EMB brake-by-wire. Second-generation samples have also been successfully completed, and we are actively planning a third-g...[Details]
In the field of communications power supplies, AC/DC rectifier power supplies are called primary power supplies or basic power supplies, while DC/DC converters are called secondary power supplies. ...[Details]
On August 21, according to a report by Korean media SEDaily yesterday, according to semiconductor industry sources, the HBM4 samples provided by Samsung to Nvidia last month have passed initial tes...[Details]
Facial recognition, a biometric technology that uses facial features to authenticate identity, has rapidly become a global market hotspot in recent years as the technology has entered practical use...[Details]
Qiangmao, your trusted semiconductor solutions partner, sincerely invites you to visit Electronics India 2025, South Asia's leading trade show for electronic components, systems, applications...[Details]
01. Introduction
As in-vehicle networks migrate from the CAN
bus
to
Ethernet
, traditional millisecond-level synchronization accuracy can no longer meet the requirements of mul...[Details]
introduction
As core electronic components used in vastly different fields, automotive-grade chips and mobile/consumer-grade chips exhibit significant differences in their...[Details]
With the growth of the Internet of Things (IoT), wearable, and portable devices, consumers are growing weary of cluttered cables and the need for frequent battery recharges. The benefits of wireles...[Details]