COMMUNICATIONS COMPONENTS
Miniature Variable Attenuator
MV50 Series
Key Features
• C+L or 1310 nm band operation
• Excellent wavelength dependence and ripple
• Low PDL
• Improved thermal stability
• Compact size
• Single-channel or multichannel applications
Applications
• Power equalization in multichannel,
optically amplified networks
• Power control into narrowband
wavelength division multiplexers
(WDMs) and configurable networks
• Power control into receivers
For the increasing bandwidth demands of today’s networks, JDSU has now
improved on the existing MV50 by allowing for 1310 nm operation, in addition
to the C or L bands. As a next generation-version of the MV47, the MV50 offers
excellent wavelength dependence and ripple, low polarization dependent loss
(PDL), and improved thermal stability. The MV50 series of attenuators provides
an economical solution to managing optical power.
Identical in footprint (the MV50 can be substituted for the MV47) and similar in
design concept to the MV47, the MV50 uses an advanced graded neutral density
filter as its attenuating element. Reflective optics permit same-side jumper exit
and enable easy panel mounting. Attenuation is controlled by turning an
adjustment screw.
Excellent wavelength dependence and ripple facilitate single-channel or
multichannel power equalization, making the MV50 ideal for dense wavelength
division multiplexing (DWDM) systems.
NORTH AMERICA
:
800 498-JDSU (5378)
WORLDWIDE
:
+800 5378-JDSU
WEBSITE
:
www.jdsu.com
MV50 SERIES
Ordering Information
For more information on this or other products and their availability, please contact your local JDSU account manager or
JDSU directly at 1-800-498-JDSU (5378) in North America and +800-5378-JDSU worldwide or via e-mail at
customer.service@jdsu.com.
Sample: MVA-0S1N221B1
MVA - 0 S
Code
S
Mode
Single
mode
Code
1
2
Wavelength
C + L band
1310
nm
N
Code
2
Code
1
2
C
2
Return Loss
45 dB
Buffer Type
900 µm fiber
3 mm
cable
2 mm
cable
1
Code
A
B
C
D
E
F
G
Pigtail Length
1
0.5 m
1.0 m
1.5 m
2.0 m
3.0 m
4.0 m
5.0 m
Code
0
1
3
4
5
8
B
2
Connector Type
None
FC/PC
FC/APC
SC/PC
SC/APC
ST/PC
LC/PC
Code
N
Port Readout
No readout
Code
1
Fiber Type
9/125
single
mode
1. Unless otherwise specified, the tolerance on length is ±10%.
Tolerances for lengths below 1 m are ±10 cm.
2. LC/PC with 900 µm fiber or 2 mm cable only.
NORTH AMERICA
:
800 498-JDSU (5378)
WORLDWIDE
:
+800 5378-JDSU
WEBSITE
:
www.jdsu.com
Product specifications and descriptions in this document subject to change without notice. © 2007 JDS Uniphase Corporation 10115733 Rev. 005 11/07 MV50.DS.CC.AE
SMF-28 is a registered trademark of Corning Incorporated.
November 2007
京公网安备 11010802033920号
EEWORLD
