Iss: 1
WINSLOW ADAPTICs
W82172T38xx / W82172G03xx
Generic Data Sheet
2.54mm
A
B
2.40mm
2.5mm
0.635
Tolerance: 0.0 +/-0.25
0.00 +/-0.1
0.000 +/-0.01
Dimensions in mm.
Also available from Winslow Adaptics are cost effective, time saving solutions to test, obsolescence,
supply problems and upgrades. OEMs can upgrade equipment with custom Adaptics utilising addi-
tional logic, often saving considerable cost and time on re-design. If lead-time becomes an issue con-
tact us for a suitable package converter. We specialise in conversion of all package lead-frames. For
further information please contact your nearest sales office
sales@winslowadaptics.com
www.winslowadaptics.com
Iss: 1
WINSLOW ADAPTICs
W82172T38xx / W82172G03xx
Generic Data Sheet
Replace ‘xx’ in part number with desired suffix from list below
72 is the maximum number of pins for the Dual version—replace to required size
SUFFIX
40
41
00
06
30
02
09
10
11
01
05
08
39
15
14
25
28
18
23
07
26
24
37
17
16
29
12
27
13
DIM A
3.00
3.50
5.70
5.70
5.70
5.70
5.70
5.70
5.80
5.80
5.80
6.00
6.00
6.70
7.00
7.00
7.00
7.00
7.50
8.50
8.50
9.00
11.00
12.00
12.70
12.70
12.75
12.90
14.50
DIM B
4.60
3.50
2.56
3.06
5.80
7.56
10.06
12.76
2.54
2.96
3.46
4.96
19.00
3.26
2.96
3.00
5.11
10.06
2.54
2.46
3.00
2.54
3.06
4.46
3.06
5.11
5.73
3.00
2.96
Can’t see what you want? Call us with your enquiry: 0044 1874 625555
Iss: 1
WINSLOW ADAPTICs
W82172T38xx / W82172G03xx
Generic Data Sheet
General Specifications.
Unless stated all values are typical.
Contact
Resistance:
20 Milliohms Max
Current Rating:
1 amp max.
Dielectric Withstanding Voltage: AC 650 Volts RMS at Sea Level
Material:
Half Hard Brass.
Plating:
Tin:
6.0 microns pure bright tin over 2.5 microns nickel.
Gold:
Au/Ni 0.10µm Gold over 2.5µm Nickel
Moulding
Material:
30% Glass Fibre-Reinforced Polyester (Polybutylene
Terephthalate -
PBT)
Insulation Resistance:
5000 Megohms (contact to contact) at 500VDC
Arc Resistance:
145 seconds at 23 degrees C
Electrical Strength:
121KV/cm at 23 degrees C
Dielectric Constant:
3.9 (48 hrs 90%RH) at 100Hz 23 degrees C
4.5 at 100Hz 121 degrees C
3.7 (48 hrs 90%RH) at 1MHz 23 degrees C
4.3 at 1MHz 121 degrees C
Dissipation Factor:
0.0077 (48 hrs 30%RH) at 100Hz 23 degrees C
0.0300 at 100Hz 121 degrees C
0.0150 (48 hrs 30%RH) at 1MHz 23 degrees C
0.0200 at 1MHz 121 degrees C
Volume Resistivity:
3 x 1013ohms-CM (48 hrs 90%RH) at 25 degrees C
1013ohms-CM at 121 degrees C
Operating Temperature:
-65 to 150 degrees C
Flammability:
UL94V-0
sales@winslowadaptics.com
DIP Support products from Winslow Adaptics
www.winslowadaptics.com
Custom Upgrades
Package
Conversion
Pitch Change
Also available from Winslow Adaptics are cost effective, time saving solutions to test, obsolescence,
supply problems and upgrades. OEMs can upgrade equipment with custom Adaptics utilising addi-
tional logic, often saving considerable cost and time on re-design. If lead-time becomes an issue con-
tact us for a suitable package convertor. We specialise in conversion of all package lead-frames.