Y002456R9000B19L datasheet, PDF

Datasheet> All Categories > Passive components> The resistor> Y002456R9000B19L

Y002456R9000B19L: DescriptionFixed Resistor, Metal Foil, 0.3W, 56.9ohm, 300V, 0.1% +/-Tol, -2,2ppm/Cel, 4216,; CategoryPassive components The resistor; File Size451KB，6 Pages; ManufacturerVishay; Websitehttp://www.vishay.com; Environmental Compliance

Download Datasheet Parametric View All

Y002456R9000B19L Overview

Fixed Resistor, Metal Foil, 0.3W, 56.9ohm, 300V, 0.1% +/-Tol, -2,2ppm/Cel, 4216,

Y002456R9000B19L Parametric

Parameter Name	Attribute value
Is it Rohs certified?	conform to
Objectid	851322753
Reach Compliance Code	compliant
Country Of Origin	Israel
ECCN code	EAR99
YTEOL	10
structure	Hermetically Sealed
Lead diameter	0.64 mm
Lead length	25.4 mm
lead spacing	3.81 mm
Number of terminals	2
Maximum operating temperature	125 °C
Minimum operating temperature	-55 °C
Package height	10.92 mm
Package length	10.54 mm
Package form	Radial
Package width	4.11 mm
method of packing	Bulk
Rated power dissipation(P)	0.3 W
resistance	56.9 Ω
Resistor type	FIXED RESISTOR
series	H(OTHER)
size code	4216
technology	METAL FOIL
Temperature Coefficient	2 ppm/°C
Tolerance	0.1%
Operating Voltage	300 V

Preview

Download Datasheet

View All

H Series

Vishay Foil Resistors

New Generation of Secondary Standards Hermetically Sealed High Precision Bulk

Metal

Foil Technology Resistors with TCR of ± 2 ppm/°C, Tolerance of ± 0.001 % and

Load Life Stability of ± 0.005 % (Metrology, Laboratory, Instrumentation, Industrial)

FEATURES

•

Temperature coefficient of resistance (TCR):

± 2 ppm/°C typical (- 55 °C to + 125 °C, + 25 °C

ref.).

For

ultra

high

performances

(instrumentation and metrology) please refer to

the last page

•

Resistance range: 5

to 1.84 MΩ (higher or

lower values of resistance available)

•

Vishay Foil resistors are not restricted to standard values;

specific “as required” values can be supplied at no extra

cost or delivery (e.g. 1K2345 vs. 1K)

•

Power rating: 0.3 W to 2.5 W at + 25 °C (depending on

model - see table 2)

•

Tolerance: to ± 0.001 % (10 ppm)

•

Load life stability to ± 0.002 % (20 ppm) at 25 °C, 2000 h

at rated power

•

Load life stability can be considerably improved

through in-house stabilization

•

Shelf life stability: ± 2 ppm for at least 6 years

(unaffected by humidity)

•

Electrostatic discharge (ESD) up to 25 000 V

•

Rise time: 1 ns effectively no ringing

•

Thermal stabilization time < 1 s (nominal value achieved

within 10 ppm of steady state value)

•

Current noise: 0.010 µV

RMS

/V of applied voltage (< - 40 dB)

•

Thermal EMF: 0.05 µV/°C typical

•

Voltage coefficient: < 0.1 ppm/V

•

Non-inductive: < 0.08 µH

•

Non-inductive, non-capacitive design

•

Non hot spot design

•

Terminal finish available: lead (Pb)-free or tin/lead alloy

•

Impervious to harmful environments - oil-filled

•

Compliant to RoHS directive 2002/95/EC

•

Prototype quantities available in just 5 working days

or sooner. For more information, please contact

foil@vishaypg.com

•

For better performances (values, TCR, tolerance, stability),

please see the HZ series

INTRODUCTION

The H series resistors are oil-filled, hermetically sealed ultra

precision resistors and are used as secondary standards for

metrology applications.

The hermetic sealing eliminates the ingress of moisture and

oxygen, while the oil acts as a thermal conductor, thus

eliminating the long-term degradation elements of unsealed

resistors, while at the same time allowing the device to

accept short periods of overload without degradation.

Vishay’s Bulk Metal

Foil outperforms all other resistor

technologies available today for applications that require

precision and stability. When combined with the hermetic

sealing and oil filling, the H series resistors become

the most

precise and stable resistors available.

With accuracies of 0.001 %, a resistance range from 5

to 1.84 MΩ, and long term shelf life of less than 2 ppm,

these devices are virtually secondary standards that can be

carried in sets for daily or periodic calibration of factory

measurement equipment.

The H series is available with laboratory and metrology

level precision and long-term stability with additional

in-house oriented processes such as: chip stabilization,

special TCR plotting, additional treatments for ultra

stability and special post manufacturing operations

(PMO). (Please refer to the last page)

TABLE 1 - TCR VS. RESISTANCE VALUE

RESISTANCE

VALUE (Ω)

100 to < 1M84

50 to < 100

5 to < 50

TYPICAL TCR AND MAX. SPREAD

(- 55 °C to + 125 °C, + 25 °C ref.)

(ppm/°C)

± 2 ± 2.5

± 2 ± 3.5

± 2 ± 4.5

FIGURE 1 - SHELF LIFE - VHA518-11

12K9 VS. QHE

0.9

0.8

0.7

0.6

0.5

0.4

0.3

0.2

0.1

- 0.1

100 200 300 400 500 600 700 800 900 1000

Note

• For maximum TCR < 1 ppm/°C, see VHP100 and contact

application engineering

* Pb containing terminations are not RoHS compliant, exemptions may apply

Resistance Change (ppm)

Time (Days)

Document Number: 63006

Revision: 23-Mar-10

For any questions, contact:

foil@vishaypg.com

www.foilresistors.com

Recommended Resources

BBC engine circuit diagram

Electric contact pressure gauge liquid level automatic control circuit 5

Start circuit diagram using relays, etc.

RF noise bridge

800HZ clock circuit diagram for cassette machine

Programmable pulse width generation circuit

I need a cracked version of CodeWarrior for HCS08: Does anyone have a confirmed version of CodeWarrior for hcs08? Could you please send it to my email? yby227@163.com Thank you very much...; chunxilu1979 Embedded System

Electric actuator problem. Please teach me: The electric actuator, I gave a signal of 20%. Or more. But the feedback sometimes does not move. After I went to the site to manually debug, the feedback can move again. Is it a problem with the posi...; eeleader Industrial Control Electronics

Could you please help me find the error when compiling u-boot?: 前提是我拿别人的交叉编译工具. root@localhost u-boot-1.1.6]# export PATH=/ning/2.95.3/bin:$PATH[root@localhost u-boot-1.1.6]# make B2_configConfiguring for B2 board...[root@localhost u-boot-1.1.6]# makefor dir in to...; ailikelhl Embedded System

It's all the fault of the adjustable resistor (potentiometer), matrix keyboard debugging notes: An experience, a lesson. Let's take a look. I have been debugging AVR microcontroller circuit boards these days and found a strange phenomenon: the matrix keyboards on more than half of the boards can...; tiankai001 MCU

How to use 430f149 pwm to generate sine wave: I use pwm to read the sine wave table, but the output is just the duty cycle changing, not the sine wave. Is there something missing? Can an expert give me some advice? Thanks!...; 1122zxh Microcontroller MCU

How to simulate the USB interface of embedded development board into a keyboard?: [align=left][color=rgb(0, 0, 0)][backcolor=rgb(255, 255, 255)][font=微软雅黑][size=14px][size=4]As the title says, cortex-A8 platform, kernel version: linux 2.6.37[/size][/size][/font][/backcolor][/color]...; 37°男人 ARM Technology

Shortcut: A0 A1 A2 A3 A4 A5 A6 A7 A8 A9 AA AB AC AD AE AF AG AH AI AJ AK AL AM AN AO AP AQ AR AS AT AU AV AW AX AY AZ B0 B1 B2 B3 B4 B5 B6 B7 B8 B9 BA BB BC BD BE BF BG BH BI BJ BK BL BM BN BO BP BQ BR BS BT BU BV BW BX BY BZ C0 C1 C2 C3 C4 C5 C6 C7 C8 C9 CA CB CC CD CE CF CG CH CI CJ CK CL CM CN CO CP CQ CR CS CT CU CV CW CX CY CZ D0 D1 D2 D3 D4 D5 D6 D7 D8 D9 DA DB DC DD DE DF DG DH DI DJ DK DL DM DN DO DP DQ DR DS DT DU DV DW DX DZ

Popular Components