See Performance Data: refer to page Important-2 of the A113
Industrial Controls
catalogue.
➋
Operating temperature below 0°C (32°F) are based on the absence of freezing
moisture and liquids.
➌
Per IEC 947-1.
➍
UL File & Guide Number E14840.
Silver nickel alloy
Fine silver
Palladium silver
Gold-plated over
alloy: spanner; gold- silver
plated silver nickel:
stationary contacts
Terminals:
Screw type Plated steel
Push-on type
Agency approvals
Approvals
UL listed
➍/CSA
certified
Standard conformity
UL508, UL486E
NEMA ICS-1 and
CSA22.2 #14,
ICS-2 IEC 204-1,
NEMA ICS-1 and
947; SEV 1005,
ICS-2 (1983), IEC
1093; VDE 0113,
144, IEC 947-1, IEC 0660 Part 201; BS
947-5, VDE 0550,
4794; CEE 24; UL
VDE 0660, Part 200 486E, UL 508,
CSA22.2 #14
6-14
Emergency Stop Devices
Push Buttons
800 E-Stops
Product Selection—22.5mm
2-Position Push-Pull Operators, Non Illuminated—Twist-to-Release, Push-Pull
40mm Trigger Action
Twist-to-Release Mushroom
40mm Twist-to-Release Mushroom
40mm Push-Pull Mushroom
800E-15YE112
Legend Plate for 40mm Ca
Colour
Operator Material
Plastic
Metal
40mm Mushroom Operator
Twist-to-Release — Round (Trigger Action)
!
Push-Pull Twist-to-Release — Round
➋
Push-Pull — Round
➋
Catalogue Number
800EP-MTS44
800EM-MTS44
800EP-MT4
800EM-MT4
800ES-MP24
800EM-MP24
Red
Plastic
Metal
Plastic
Metal
2-Position Trigger Action Operators, Non Illuminated—Key Release
➌
40mm Key Release Mushroom
60mm Key Release Mushroom
800E-16YE112
Legend Plate for 60mm Cap
Colour
2 Position Trigger Action
!
Mushroom Operator
Ronis Key Lock
Size
40mm—Round
60mm—Round
40mm—Round
60mm—Round
Catalogue Number
800EP-MKR44
800EP-MKR64
800EP-MKZ44
800EP-MKZ64
Red
Zadi Key Lock
Back-of-Panel Components, Non Illuminated Operators
Mounting Latch and
Contact Block Combination
Mounting
2-Across
Contact
➊➋
1 N.C. Late break
1 N.O. - 1 N.C. Late break
1 N.C. Late break
1 N.O. - 1 N.C. Late break
1 N.C. Self-monitoring
3-Across
800E-3LX01S
!
Trigger action operators are compliant with EN418 standards using standard N.C., N.C. Late Break, or N.C. Self-Monitoring contact blocks. Key Release operators are
IP66, Type 4/13.
➋
Emergency stop push buttons are compliant with EN 418 standard when using N.C. Late break (N.C.L.B.) contact blocks.
➌
Key release operators are IP66, Type 4 and 13.
2-Across
3-Across
Catalogue Number
800E-2LX01L
800E-2LX11L
800E-3LX01L
800E-3LX11L
800E-2LX01LS
3-Across
2-Across
6-15
Emergency Stop Devices
Push Buttons
800 E-Stops
Product Selection—22.5mm
2-Position Red Push-Pull Operators, Illuminated —Mushroom
➊
40mm Mushroom Push-Pull
60mm Jumbo Mushroom Push-Pull
800E-15YE112
Legend Plate for 40mm Cap
Operator Material
Plastic
Size
40mm
60mm
40mm
Catalogue Number
800ES-LMP24
800ES-LMJP24
800EM-LMP24
800EM-LMJP24
Metal
60mm
Back-of-Panel Components,
Illuminated Operators
2-Across
(5 ckts. max.)
3-Across
(4 ckts. max.)
Mounting
Type
Incandescent
Volts
24 AC/DC
120 AC/DC
Catalogue Number
800E-2DL3
800E-2DL5
800E-2DL3R
800E-2DL5R
800E-3DL3
800E-3DL5
800E-3DL3R
800E-3DL5R
800E-2TL5
800E-2TL7
800E-2TL5R
800E-2TL7R
800E-3TL5
800E-3TL7
800E-3TL5R
800E-3TL7R
2-Across
24 AC/DC
LED (red)
120 AC
24 AC/DC
Incandescent
Full Voltage Power Module with Latch
3-Across
LED (red)
Incandescent
2-Across
LED (red)
Incandescent
3-Across
Transformer Power Module with Latch
2-Across
3-Across
120 AC/DC
24 AC/DC
120 AC
24 AC/DC
120 AC/DC
24 AC/DC
120 AC
24 AC/DC
120 AC/DC
24 AC/DC
LED (red)
120 AC
2-Across (3 ckts. max.)
3-Across
(2 ckts. max.)
2-Across
Late Break
!
800E-2X01L
1 N.C. Late break
800E-3X01L
3-Across
Contact Blocks
!
Emergency stop push buttons are compliant with EN 418 standard when using N.C.L.B. contact blocks.
6-16
Emergency Stop Devices
Push Buttons
800 E-Stops
!
Specifications—30.5mm
Electrical Ratings
Dielectric strength
Electrical design life cycles
Mechanical Ratings
Vibration
2200V for one minute
1,000,000 at max. rated load
10 to 2000Hz 1.52mm displacement
(peak-to-peak) max./10g max. (except
Logic Reed)
1/2 cycle sine wave for 11ms
≥25g
(contact fragility) and no damage at 100g
Type 1, 4, 4X, 12, 13; watertight/oiltight
IEC 529 IP66/65
Shock
Degree of protection
Mechanical design life
cycles
250,000 min.
(Push-pull/twist-to-release)
Contact operation
Shallow, mini, and low voltage contact
blocks: Slow, double make and break.
Typical operating forces
7.5lbs max. push or pull
2-position push-pull
Environment
Temperature range
Operating
➋
-40°C to +55°C (-40°F to +131°F)
Storage
-40°C to +85°C (-40°F to +185°F)
Standard Contact Ratings
Maximum thermal continuous current
I
th
10A AC/2.5A DC.
Bulletin 800T units with 800T-XA contacts have ratings as follows:
Max.
Opertnl.
Volts Ue
Utilization
Category
IEC
NEMA
A600
Rated Operational Currents
Volts Ue
120 to 600
72 to 120
24 to 72
28 to 600
24 to 28
➌
Make
Break
7200VA
720VA
60A
720VA
60A
10A
69VA
2.5A
AC 600
AC-15
DC 600
DC-13
Q600
!
Performance Data: see publication A113, page Important-2.
➋
Operating temperatures below freezing are based on the absence of moisture
and liquids.
➌
For applications below 24V/24mA, PenTUFF contacts are recommended.
6-17
Emergency Stop Devices
Push Buttons
800 E-Stops
Product Selection—30.5mm
Emergency Stop Operators — 2-Position Red Non Illuminated
2-Position Push-Pull
2-Position Push-Pull/Twist
Operator Position
Contacts Maintained Out Maintained In
Enclosure
Protection
Type 4 & 13
Release
Push-Pull
Catalogue Number
800T
-FX6D4
800T
-FXT6D4
N.C.L.B.
!
Closed Open
Push-Pull/Twist
Type 4, 4X & 13
Push-Pull
N.O. Open Closed
N.C.L.B.
!
Closed Open
Type 4 & 13
800T
-FXT6A1
Push-Pull/Twist
Type 4, 4X & 13
N.C.L.B.
!
Closed Open
N.C.L.B.
!
Closed Open
Push-Pull
Type 4 & 13
800T
-FXT6A5
Push-Pull/Twist
Type 4, 4X & 13
Push-Pull
S.M.C.B.
➊➋
Closed Open
Type 4 & 13
800TC-FXT6D4S
Push-Pull/Twist
Type 4, 4X & 13
Push-Pull
N.O. Open Closed
S.M.C.B.
➊➋
Closed Open
Type 4 & 13
800TC-FXT6A1S
Push-Pull/Twist
Type 4, 4X & 13
Push-Pull
S.M.C.B. Closed Open
S.M.C.B.
➊➋
Closed Open
Type 4 & 13
800TC-FXT6A5S
Push-Pull/Twist
Type 4, 4X & 13
Note:
Emergency stop push buttons are compliant with EN-418 and IEC 60947-5-5 Standards when using N.C.L.B. contact blocks.
➊
Normally closed late break contact. When button is pushed from the OUT to IN position, the mechanical detent action of the operator occurs before electrical contacts
change state. When the button is pulled from the IN to the OUT position, the electrical contacts change state before the mechanical detent occurs.
➋
The Self-Monitoring Contact Block (S.M.C.B.) is composed of a N.C.L.B. contact wired in series with a N.O. monitoring contact. The N.O. monitoring contact automatically
closes when the S.M.C.B. is properly installed onto the E-Stop operator. If the S.M.C.B. is separated from the E-Stop operator, the N.O. monitoring contact will
Imagine a car from the future: the driver can easily connect his phone to the car and set a destination or play music on a touch screen control panel that supports color 3D graphics. Not only that, th...
The data is collected using the built-in 10-bit 200KSPS ADC of the LaunchPad MSP430G2231 and sent to the host through the serial port.
The host computer software is developed using CSharp, which recei...
In different working modes, the CPU will disable some modules to control power consumption. , Helvetica, sans-serif][size=3][color=#000000] （[b]PS[/b][b]:[/b]The same sentence, "power consumption is t...
Clock waveform output test
Like STM32 , the PA.8 pin of STM32 has the MCO function , which has a multiplexing function - clock output (MCO) , which can output the internal clock of STM32 through PA.8 ...
[b][size=5][color=red][/color][/size][/b] [b][size=5][/size][/b] [b][size=5], is a forgotten small county town, where people live leisurely and without noise. Coming here, you can really get a piece o...
As early as when I was reading Refactoring, I always wanted to learn how to write test programs. Later, I searched Baidu and found that there is a CUnit under C, which is roughly the same as JUnit. At...
Magnetic resonance imaging (MRI) systems for medical and scientific applications require a high-performance, high-power inductor capable of establishing a uniform, strong magnetic field. Transverse el...[Details]
As a single-host multi-slave bus system, the number of slave devices that can be connected to a 1-Wire bus is almost unlimited. In order to avoid logical conflicts, the 1-Wire bus interfaces of all...[Details]
Due to the needs of medical development, in many cases, general thermometers can no longer meet the requirements of fast and accurate temperature measurement, such as measuring human body temperature ...[Details]
0 Introduction
Metal halide lamp (MHL) as a green lighting source has been widely used in the field of indoor and outdoor lighting. However, when using this green lighting source, the matc...[Details]
Complex circuits and 3D EM simulation tools have reached a point where complex system-level behavior can be simulated before fabrication. Performing EM simulations simultaneously with circuit simul...[Details]
Demand Analysis
In an era of rapid information development, the process of electronicization of the financial system has also been greatly accelerated. As a platform that provides services 24 ...[Details]
Multi-parameter monitor is an important device in clinical nursing. It can monitor the patient's ECG, blood pressure, blood oxygen saturation, respiratory rate, pulse rate and temperature. At present,...[Details]
Preface
In recent years, many compact portable electronic products have been developed, such as mobile phones, digital cameras, MP3, MP4, PDA, GPS and DVD, etc. They are not only small in size...[Details]
introduction
The data detected by various
measuring instruments
often need to be transferred to a PC for data processing and archiving, so as to make full use of the rich hardware an...[Details]
Combined with Samsung's ARM9 series embedded processor S3C2410, this paper explains how to perform modular programming of LCD driver and how to statically load the driver into the system kernel.
...[Details]
With the advent of the new economic era represented by the Internet, PCs have lost their former glory, and smart 3C products (Computer, Communication and Consumer) will set off a new wave. As one o...[Details]
Battery system architecture
For many years, nickel-cadmium batteries and later nickel-metal hydride battery technology have dominated the market. Lithium batteries have only entered ...[Details]
Touch sensors have been in widespread use for many years, but recent advances in mixed-signal programmable devices have made capacitive touch sensors a practical, value-added alternative to mechani...[Details]
Automatic target recognition (ATR) algorithms usually include algorithms for automatically detecting, tracking, identifying, and selecting attack points for targets. The complexity of the battlefi...[Details]
Nowadays, video conferencing has become a situation where multiple manufacturers supply various high-definition products. The technology of high-definition products has greatly matured, the cost h...[Details]
DSP and ARM Processors
京公网安备 11010802033920号
EEWORLD
