I am an electronic engineer. I have studied English in China for more than ten years. I can neither listen nor read. I arrived in the UK on February 4, 2006. After a week of rest, I started looking fo...
I want to amplify the voltage to about 25V after passing through the DAC, and then drive the DC fan after power amplification. What amplifier chip and power amplification should be used?...
I can only use the timer interrupt, but not the serial port interrupt to send data. However, after disabling the timer interrupt service subroutine, the serial port interrupt works fine. I would like ...
I'm using NAND FLASH K9K8G08U0A (8Gbit) as the external memory of DSP2812 recently. I use IO port to simulate timing for reading and writing. According to Samsung's technical documents, I have written...
[size=14px]One day, when my girlfriend was sleeping, I accidentally woke her up. She was furious: I dreamed of eating at Golden Leopard Buffet and I just peeled the prawns! [/size]...
:surrender::surrender: Some time ago, I got kicked in the head by a donkey and picked up a TX2416_B development board. It has been more than a month since I got it. Now I don’t have any information pa...
In the past few days, the news that ZTE was "banned" by the US Department of Commerce has triggered widespread reflection and concern in various domestic industries about the lack of independent co...[Details]
Wang Xiaochuan, the "Wudaokou Goalkeeper", is going through a level that he has never gone through before. For example, Sogou's (NYSE: SOGO) financial report, artificial intelligence, and the futur...[Details]
1. The first project We are going to create the first project, which is mainly for project analysis, so that we can understand how CubeMX works and how to trace the code logic. Okay, no more nonsense...[Details]
background After the hardware engineer completed the PCB and schematic design, the routine was modified according to the tutorial of Zhengdian Atom to verify the correctness of the hardware. STM32F...[Details]
Overview
Lightning is a strong discharge phenomenon that occurs between thunderstorm clouds and between thunderstorm clouds and the earth due to severe convective weather. Lightning is gen...[Details]
In the project, CPLD is needed to complete part of the algorithm design. The parameters are given by AVR, so the communication between AVR and CPLD needs to be completed. Therefore, a test program is...[Details]
1. Heart rate measurement principle 1. What is a heart rate module? The heart rate module is professionally used to monitor the heart rate of the wrist, fingers, forehead, earlobe, chest and other ...[Details]
//Observe the difference between feeding the dog and not feeding the dog, and use the LED indicator of the PB port for status indication. //Switch the LED indicator enable switch of the PB po...[Details]
1. What is PWM What is PWM? Professionally speaking, it is pulse width modulation. In layman's terms, it is the continuous output of high and low levels. For example, the microcontroller outputs...[Details]
//******************************************************************************/ #include msp430.h //Note: There must be a delay between two transmissions, otherwise it cannot be sent again, seria...[Details]
The following comes from - "cortex-M3 Definitive Guide" Special function register group: Program Status Registers (PSRs or xPSRs) Interrupt mask register group (PRIMASK, FAULTMASK, and BASEPRI) ...[Details]
#include avr/io.h #include avr/interrupt.h int main() { DDRB|=0X20;//Set PWM waveform output, connected to port PB5, see the comment of OCR1A=15625 for details DDRE=0X04; PORTE=0X04; DDRA=0XFF; P...[Details]
Recently, in the display industry,
quantum dot
display technology has become popular, and major manufacturers have flocked to it and started to produce
quantum dot
displays. However...[Details]
Automotive Electronics
京公网安备 11010802033920号
EEWORLD
