®
Q Series Data Sheet
66
–
132 Watt DC-DC Converters
Features
• RoHS lead-free-solder and lead-solder-exempted
products are available
• Wide input voltage ranges up to 150 VDC
• 1 or 2 isolated outputs from 3.3 to 48 V
• Class I equipment
• Extremely high efficiency of up to 90%
• Flexible output power
•
Excellent surge and transient protection
•
Outputs open and short -circuit proof
•
Redundant operation, current sharing
•
Extremely low inrush current, hot-swappable
•
Externally adjustable output voltage and inhibit
•
Electric strength test 2.1 kVDC
•
Extremly slim case (4 TE, 20 mm), fully enclosed
•
Railway standards EN 50155, 50121-3-2 observed
•
Telecoms-compatible input voltage range of 48Q
models according to ETS 300132-2 (38.4 to 75 VDC)
111
4.4"
3U
Safety-approved to IEC/EN 60950-1 and UL/CSA
60950-1 2
nd
Ed.
20
0.8"
4 TE
164
6.5"
Description
These extremely compact DC-DC converters incorporate all
necessary input and output filters, signaling and protection
features, which are required in the majority of applications.
The converters provide important advantages such as flexible
output power through primary current limitation, high
efficiency, excellent reliability, very low ripple and RFI noise
levels, full input to output isolation, negligible inrush current,
overtemperature protection, and input over-/undervoltage
lockout. The converter inputs are protected against surges
and transients occurring on the source lines.
The converters are particularly suitable for rugged
environments, such as railway applications. They have been
designed in accordance with the European railway standards
EN 50155 and EN 50121-3-2. All printed circuit boards are
coated with a protective lacquer.
The outputs are continuously open- and short-circuit proof. An
isolated output Power Good signal and LEDs at the front panel
indicate the status of the converter. Test sockets at the front
panel allow for a check of the main output voltage.
Full system flexibility and n+1 redundant operating mode are
possible due to virtually unrestricted series or parallel
connection capabilities of all outputs. In parallel connection of
several converters, automatic current sharing is provided by a
single-wire interconnection.
As a modular power supply or as part of a distributed power
supply system, the extremely low profile design significantly
reduces the necessary power supply volume without
sacrificing high reliability. A temperature sensor disables the
outputs, if the case temperature exceeds the limit. The outputs
are automatically re-enabled, when the temperature drops
below the limit.
The fully enclosed, black-coated aluminum case acts as a heat
sink and an RFI shield. The converters are designed for 19"
DIN-rack systems occupying 3 U / 4 TE only, but can also be
chassis-mounted by means of four screws. Fitting an
additional heat or ordering options with fitted heat sink is
possible as well.
Table of Contents
Page
Page
Electromagnetic Compatibility (EMC) ...............................
Immunity to Environmental Conditions .............................
Mechanical Data ...............................................................
Safety and Installation Instructions ...................................
Description of Options ......................................................
Accessories .......................................................................
19
21
22
23
24
26
Description .......................................................................... 1
Model Selection .................................................................. 2
Functional Description ........................................................ 5
Electrical Input Data ............................................................ 6
Electrical Output Data ......................................................... 8
Auxiliary Functions ............................................................ 16
BCD20011- G Rev AG, 12-Mar-2012
Page 1 of 26
www.power-one.com
®
Q Series Data Sheet
66
–
132 Watt DC-DC Converters
Model Selection
Table 1a: Model types BQ, GQ
Output 1
V
o nom
[VDC]
3.3
5.1
12
3
15
3
24
3
5.1
4
12
4
15
4
24
4
I
o nom
[A]
20*
16
8
6.6
4.4
7.5
4
3.3
2.2
I
o max
[A]
25*
20
10
8
5.5
15
9.2
7.4
5.1
V
o nom
[VDC]
-
-
-
-
-
5.1
4
12
4
15
4
24
4
Output 2
I
o nom
[A]
-
-
-
-
-
7.5
4
3.3
2.2
I
o max
[A]
-
-
-
-
-
15
9.2
7.4
5.1
Output power
1
Operating input voltage range, efficiency
Options
T
A
= 71 °C
T
A
= 50 °C
V
i min
–
V
i max
η
min2
η
typ
V
i min
–
V
i max
η
min2
η
typ
P
o nom
[W]
P
o max
[W] 14.4 – 36 VDC [%] [%] 21.6 – 54 VDC [%] [%]
66*
82
96
99
106
77
96
99
106
82*
102
120
120
132
97
120
120
132
BQ1101-9
BQ1001-9R
BQ2320-9R
BQ2540-9R
BQ2660-9R
BQ2001-9R
BQ2320-9R
BQ2540-9R
BQ2660-9R
81*
85
87.5**
87
89*
85
87.5**
87
89*
86
87.5
88
90.5*
86
87.5
88
90.5*
GQ1101-9
GQ1001-9R
GQ2320-9R
GQ2540-9R
GQ2660-9R
GQ2001-9R
GQ2320-9R
GQ2540-9R
GQ2660-9R
-7,
85.5 86 -7, P,
86
87 -7, P,
86.5 88.5 -7, P,
89* 90* -7, P,
85.5 86
-7,
86
87 -7, P,
86.5 88.5 -7, P,
89* 90* -7, P,
B1,
B1,
B1,
B1,
B1,
B1,
B1,
B1,
B1,
G
G
G
G
G
G
G
G
G
Table 1b: Model types CQ, 48Q
Output 1
V
o nom
[VDC]
3.3
5.1
5.1
12
3
12
3
15
3
15
3
24
3
24
3
5.1
4
12
4
12
4
15
4
15
4
24
4
24
4
I
o nom
[A]
20*
16
16
8
8
6.6
6.6
4.4
4.4
7.5
4
4
3.3
3.3
2.2
2.2
I
o max
[A]
25*
20
16
10
8
8
6.6
5.5
4.4
15
9.2
7.2
7.4
6
5.1
4
Output 2
V
o nom
[VDC]
-
-
-
-
-
-
-
-
-
5.1
4
12
4
12
4
15
4
15
4
24
4
24
4
I
o nom
[A]
-
-
-
-
-
-
-
-
-
7.5
4
4
3.3
3.3
2.2
2.2
I
o max
[A]
-
-
-
-
-
-
-
-
-
15
9.2
7.2
7.4
6
5.1
4
Output power
1
Operating input voltage range, efficiency
Options
T
A
= 71 °C
T
A
= 50 °C
V
i min
–
V
i max
η
min2
η
typ
V
i min
–
V
i max
η
min2
η
typ
P
o nom
[W]
P
o max
[W] 33.6* – 75 VDC [%] [%] 38.4 – 75 VDC [%] [%]
66*
82
82
96
96
99
99
106
106
77
96
96
99
99
106
106
82*
102
82
120
96
120
99
132
106
97
120
96
120
99
132
106
CQ1101-9
CQ1001-9R
CQ2320-9R
CQ2540-9R
CQ2660-9R
CQ2001-9R
CQ2320-9R
CQ2540-9R
CQ2660-9R
82*
85
87
87
89*
85
87
87
89*
87
48Q1001-2R
88
48Q2320-2R
88.5
48Q2540-2R
91
48Q2660-2R
87
88
48Q2320-2R
88.5
48Q2540-2R
91
48Q2660-2R
87
85
85
87
85
85
83
-7, B1, G
-7, P, B1, G
B1, G
-7, P, B1, G
B1, G
-7, P, B1, G
B1, G
-7, P, B1, G
B1, G
-7, B1,
-7, P, B1,
B1,
-7, P, B1,
B1,
-7, P, B1,
B1,
G
G
G
G
G
G
G
Table 1c: Model types DQ, EQ
Output 1
V
o nom
[VDC]
3.3
5.1
12
3
15
3
24
3
5.1
4
12
4
15
4
24
4
I
o nom
[A]
20*
16
8
6.6
4.4
7.5
4
3.3
2.2
I
o max
[A]
25*
20
10
8
5.5
15
9.2
7.4
5.1
Output 2
V
o nom
[VDC]
-
-
-
-
-
5.1
4
12
4
15
4
24
4
I
o nom
[A]
-
-
-
-
-
7.5
4
3.3
2.2
Output power
1
Operating input voltage range, efficiency
Options
I
o max
T
A
= 71 °C
T
A
= 50 °C
V
i min
–
V
i max
η
min2
η
typ
V
i min
–
V
i max
η
min2
η
typ
[A]
P
o nom
[W]
P
o max
[W] 43 – 108 VDC [%] [%] 65 – 150
5
VDC [%] [%]
-
-
-
-
-
15
9.2
7.4
5.1
66*
82
96
99
106
77
96
99
106
82*
102
120
120
132
97
120
120
132
DQ1101-9
DQ1001-9R
DQ2320-9R
DQ2540-9R
DQ2660-9R
DQ2001-9R
DQ2320-9R
DQ2540-9R
DQ2660-9R
82*
85.5 86.5
88
90
89* 90.5
89* 90.5
85
88
89*
89*
86.5
90
90.5
90.5
EQ1101-9
EQ1001-9R
EQ2320-9R
EQ2540-9R
EQ2660-9R
EQ2001-9R
EQ2320-9R
EQ2540-9R
EQ2660-9R
84.5
87
87.5
87.5*
84
87
87.5
87.5*
86
88.5
89
89.5
86
88.5
89
89.5
-7,
-7, P,
-7, P,
-7, P,
-7, P,
-7, P,
-7, P,
-7, P,
-7, P,
B1,
B1,
B1,
B1,
B1,
B1,
B1,
B1,
B1,
G
G
G
G
G
G
G
G
G
* Converters with version V104 or higher. ** Converters with version V105 or higher.
1
The cumulated power of both outputs can not exceed the total power for the specified ambient temperature. See also
Output Power at
Reduced Temperature.
2
Minimum efficiency at
V
i nom
,
I
o nom
and
T
A
= 25 °C
3
Double-output models with both outputs connected in parallel
4
Double-output models. Output 2 is a tracking output isolated from the output 1.
5
168 V for
≤
2 s
NFND: Not for new designs.
Preferred for new designs
BCD20011- G Rev AG, 12-Mar-2012
Page 2 of 26
www.power-one.com
®
Q Series Data Sheet
66
–
132 Watt DC-DC Converters
Part Number Description
Input voltage range
V
i
:
14.4 – 36 V ....................................................... B
21.6 – 54 V ....................................................... G
33.6 – 75 V ........................................................ C
38.4 – 75 V ..................................................... 48
43 – 108 V ......................................................... D
65 – 150 V ......................................................... E
Series ................................................................................... Q
Number of outputs:
Single-output models ......................................... 1
Double-output models ........................................ 2
Single-output models (long case)
2
................... 6
Double-output models (long case)
2
................. 7
Single-output models:
Nominal output voltage (main output):
3.3 V ................................................................... 1
5.1 V ................................................................... 0
12 V .................................................................... 3
15 V .................................................................... 5
24 V ................................................................ 6, 7
Other voltages ............................................ 7, 8, 9
Other specifications or additional
features for single-output models
3
.... 01 – 99
Double-output models:
Nominal voltage of 2
nd
output
V
o2 nom
5.1 V ........................................................ 01 –
12 V ......................................................... 20 –
15 V ......................................................... 40 –
24 V ......................................................... 60 –
Other voltages or additional
features
3 ..................................................................
01 –
C Q 2 5 40 -9 R B1 G
09
39
59
79
99
Operational ambient temperature range
T
A
:
–10 to 50 °C ...................................................... -2
–25 to 71 °C (option, NFND) ............................ -7
–40 to 71 °C ...................................................... -9
other ....................................................... -0, -5, -6
Output voltage control input (auxiliary function)
1
................. R
Potentiometer (option, NFND)
1
........................................... P
Additional heatsinks ..................................................... B , B1
RoHS compliant for all six substances ............................ G
3
1
2
3
Option P excludes feature R and vice versa.
Models with 220 mm case length. Just add 5000 to the standard model number.
Customer-specific models.
Note:
The sequence of options must follow the order above.
Preferred for new designs.
Example: CQ2540-9B1G: DC-DC converter, input voltage
range 33.6 to 75 V, double-output model, each
output providing 15 V/ 3.3 A, equipped with a heat
sink, operating ambient temperature
T
A
= – 40 to
71 °C, RoHS-compliant for all six substances.
Note:
All models have the following auxiliary functions, which are
not shown in the type designation: input and output filter, inhibit,
sense lines, current sharing, Out OK signal, LED indicators, and
test sockets (not 48Q models).
Note:
48Q models are designed according to Telecom standards
ETS 300132-2 and EN 41003.
V
i min
is 38.4 V such limiting the
input current
I
i
to 150% of
I
i nom
.
BCD20011- G Rev AG, 12-Mar-2012
Page 3 of 26
www.power-one.com
®
Q Series Data Sheet
66
–
132 Watt DC-DC Converters
Product Marking
Type designation, applicable safety approval and recognition
marks, CE mark, warnings, pin allocation, Power-One
patents, and company logo.
Identification of LEDs, test sockets and potentiometer.
Input voltage range and input current, nominal output voltages
and currents, degree of protection, batch no., serial no., and
data code including production site, version (modification
status) and date of production.
28
30
32
01003a
Double-output
model
Vo2+
Vo2–
i
Vi+
Vi–
Vo1+
S+
S–
Vo1–
6
10
4
12
Load
14
8
Output Configuration
The Q Series design allows different output configurations to
cover almost every individual requirement, by simply wiring
the outputs in parallel, series, or symmetrical configuration
as per the following figures. For further information and for
parallel and series operation of several converters see
Electrical Output Data.
Fig. 3
Series-output configuration
01004a
Double-output
model
Vo1+
01001a
4
12
V
o
+
Load 1
S+
28
Single-output
model
Vo+
Vo+
28
30
32
4
6
12
i
Vi+
Vi–
S–
Vo1–
Vo2+
Vo2–
14
8
6
10
30
32
GND
Load 2
V
o
–
i
Vi+
Vi–
S+
S–
Vo–
Vo–
Load
14
8
10
Fig. 4
Symmetrical-output configuration (with common ground)
Fig. 1
Single-output configuration
01005a
Double-output
model
Vo1+
01002a
4
12
S+
28
i
Double-output
model
Vo2+
Vo1+
28
30
32
S–
Vo1–
Vo2+
Vo2–
Load 1
14
8
6
6
4
12
30
32
Vi+
Vi–
i
Vi+
Vi–
S+
S–
Vo1–
Vo2–
Load 2
10
Load
14
8
10
Fig. 5
Independent-output configuration
Fig. 2
Parallel-output configuration
BCD20011- G Rev AG, 12-Mar-2012
Page 4 of 26
www.power-one.com
®
Q Series Data Sheet
66
–
132 Watt DC-DC Converters
The current limitation is located at the primary side, thus
limiting the total output current in overload conditions. This
allows flexible loading of each output for unsymmetrical loads
in the range 10 to 90% of the total output power. In applications
with large dynamic load changes, we recommend connecting
such a load to output 1. If output 2 is not used, it should be
connected parallel to output 1. Both outputs can either be
series- or parallel-connected (see
Electrical Output Data).
In normal operation, the internal control circuits are powered
by a third winding of the main choke (except 48 Q models).
Start-up is ensured from the input voltage by a linear regulator.
Note:
When the output voltage is much lower then the nominal
value, this linear regulator is activated, generating considerable
power losses.
Functional Description
The converters are designed as forward converters using
primary and secondary control circuits in SMD technology. The
switching frequency is approximately 200 kHz under nominal
operating conditions. The built-in high-efficient input filter
together with a small input capacitance generate very low
inrush currents of short duration. After transformer isolation
and rectification, the output filter reduces ripple and noise to a
minimum without compromising the dynamic ability. The
output voltage is fed to the secondary control circuit via
separate sense lines. The resultant error signal is sent to the
primary control circuit via a signal transformer.
Double-output models have the voltage regulation of output 2
relying on the close magnetic coupling of the transformer and
the output inductor together with the circuits' symmetry.
03111a
2
22
Out OK+
i
28
Primary
control circuit
Output
monitor
Output
control
24
Out OK–
18
T
16
R
3
12
S+
1
Vi+
30
Input
filter
Vi–
32
Fuse
1
4
Vo+
Vo+
Vo–
Vo–
Output
filter
6
8
10
26
C
y
Isolation
C
y
20
4
4
14
S–
1
Leading pins
Potentiometer for option P
Fig. 6
Block diagram of a single-output converter
1
2
3
Do not connect for models xQ1101 or with option P
Do not connect
03112a
2
22
Out OK+
i
28
Primary
control circuit
Output
monitor
V
o2
Output
control
24
Out OK–
18
T
16
6
R
3
Vo2+
Output
filter
Vi+
30
Input
filter
Vi–
32
Fuse
1
10
Vo2–
12
S+
1
4
Vo1+
C
y
26
Output
filter
8
Vo1–
S–
1
Isolation
1
C
y
20
4
4
14
Fig. 7
Block diagram of a double-output converter
BCD20011- G Rev AG, 12-Mar-2012
Leading pins
2
Potentiometer for option P
3
Do not connect for models with option P
Do not connect
Page 5 of 26
www.power-one.com
京公网安备 11010802033920号
EEWORLD
