EEWORLDEEWORLDEEWORLD

Part Number

Search

Y1521V0399TT0L

Description
res array mult ohm 4 res 8smd
CategoryPassive components   
File Size530KB,6 Pages
ManufacturerVishay
Websitehttp://www.vishay.com
Download Datasheet Parametric View All

Y1521V0399TT0L Overview

res array mult ohm 4 res 8smd

Y1521V0399TT0L Parametric

Parameter NameAttribute value
Datasheets
SMNH Series
Product Photos
8-SMD
Standard Package250
CategoryResistors
FamilyResistor Networks, Arrays
PackagingBulk
Circuit TypeIsolated
Resistance (Ohms)100, 3.9k
Tolerance±0.01%
Number of Resistors4
Number of Pins8
Power Per Eleme100mW
Temperature Coefficie±2ppm/°C
Applications-
Mounting TypeSurface Mou
Package / Case8-SMD, Gull Wing
Supplier Device Package-
Size / Dimensi0.520" L x 0.295" W (13.21mm x 7.49mm)
Heigh0.180" (4.57mm)
Operating Temperature-55°C ~ 125°C
SMNH
Vishay Foil Resistors
Ultra High Precision Bulk Metal
®
Foil Technology
4 Resistor Surface Mount Hermetic Network with
0.5 ppm/°C TCR Tracking and 0.005 % Tolerance Match
FEATURES
Temperature coefficient of resistance (TCR):
absolute: ± 2 ppm/°C typical
(- 55 °C to + 125 °C, + 25 °C ref.)
tracking: ± 0.5 ppm/°C typical
Resistance range: 5
Ω
to 33 kΩ
INTRODUCTION
Vishay model SMNH networks incorporate all the
performance features of Vishay Bulk Metal
®
Foil technology
in a product ready for surface mounting. The 8 pin gull wing
side brazed DIP is the smallest ceramic package. Ceramic
has the advantage of electrical isolation on the underside
and high heat dissipation capability.
Resistors in network form, around the operational amplifier
for example, are called upon to track at changing ambient
temperature, to hold ratio under power and to force the ratio
changes over a period of time to be very low.
The hermeticity, the location of the chips within the package
and the “heat-sink effect” of the ceramic package itself help
preserve uniform conditions inside it. The Bulk Metal Foil
Vishay technology advantage in such a construction assures
remarkable performance due to the following factors:
- fundamentally low TCR
- very small drift with load over time
- common behavior: all drifts move in the same direction
with temperature, load and time
- TCR and tolerance match
- excellent tracking
The major highlights are emphasized by an excellent load life
and shelf life ratio stability.
Vishay hermetic resistor networks are based on fabrication
from a standing inventory of packages and resistor chips.
This permits quick delivery of prototypes since there are no
masks to design or trial processings to be made. Further, it
allows any combination of values, tolerances and circuits.
There are normally no engineering or setup charges, and no
minimum quantities are required. Delivery can be in two
weeks. (See network express prototype service.)
The sequence of fabrication includes selection of chips, die
attachment, wirebonding, value trimming, and hermetic
sealing. The finished product provides the stability
associated with Foil resistors in a hermetically sealed
package.
Hermetic sealing of Vishay’s networks enhances their
already inherently stable environmental performance. The
result is improved load life stability and better performance
during high temperature and moisture exposure.
Vishay Foil resistors are not restricted to standard values;
specific “as required” values can be supplied at no extra
cost or delivery (e.g. 1K2345 vs. 1K)
Power rating: at 70 °C
Entire package: 0.4 W
Each resistor: 0.1 W
Resistance tolerance match: ± 0.005 %
Load life stability per resistor: 0.005 % (0.1 W at 70 °C,
1000 h)
Load life stability ratio: 0.005 % (0.1 W at 70 °C)
Shelf life stability per resistor: 0.0002 % (2 ppm)
Shelf life stability ratio: 0.0001 % (1 ppm)
Electrostatic discharge (ESD) up to 25 000 V
Short time overload
0.002 % (20 ppm)
Non-inductive, non-capacitive design
Rise time: 1 ns effectively no ringing
Thermal stabilization time < 1 s (nominal value achieved
within 10 ppm of steady state value)
Current noise: 0.010 µV
RMS
/V of applied voltage (< - 40 dB)
Voltage coefficient: < 0.1 ppm/V
Non inductive: < 0.08 µH
Non hot spot design
Terminal finish: gold plated (lead (Pb)-free)
For better performances please contact us
Available with Z-Foil technology for improved TCR to
0.2 ppm/°C
Compliant to RoHS directive 2002/95/EC
FIGURE 1 - SCHEMATICS
SMNH1
8
7
6
5
8
SMNH2
7
6
5
R
1
R
2
R
2
R
1
R
1
R
2
R
2
R
1
1
2
3
4
2
3
Note:
R
1
and R
2
may
be
same
value,
if desired
* Pb containing terminations are not RoHS compliant, exemptions may apply
Document Number: 63092
Revision: 25-Mar-10
For any questions, contact:
foil@vishaypg.com
www.foilresistors.com
1
A flashing light experiment based on LM3S301, compiled and tested completely with Proteus 8.0
I recently wanted to spend some time playing around with LM M3/M4. I applied for a few TI boards and tried to use Labview to automatically generate ARM Cortex M3 code on DK-LM3S8962. The experimental ...
平湖秋月 Microcontroller MCU
How to close the DOS window?
I wrote a self-starting batch program in WINCE OS. Every time CE OS starts, it automatically opens CMD DOS to execute the program. I hope that after DOS executes the batch file, it will automatically ...
tunersys Embedded System
C language version of the time library function file or timestamp conversion algorithm
The timestamp can be obtained from the online interface. Time synchronization data format 1. The standard timestamp is the total number of seconds from 00:00:00 Greenwich Mean Time on January 1, 1970 ...
sint27 MCU
About the writing process of SD card switching driver
Yesterday I asked about expanding the SDIO interface on PXA270, and Shuiyan mentioned that you can use the SD card switching function to switch between different SDIO devices. Since I have never done ...
baobeidudu Embedded System
Radio Frequency Technology RF and Its Origin
From procurement, storage, manufacturing, packaging, loading and unloading/handling, transportation, circulation processing, distribution, sales to service, they are all interlocking business links an...
JasonYoo RF/Wirelessly
To ensure the stability of electronic equipment, what tests need to be done on the hardware?
To ensure the stability of electronic equipment, what tests need to be done on the hardware?...
dianhang Test/Measurement

EEWorld
subscription
account

EEWorld
service
account

Automotive
development
circle

Robot
development
community

Index Files: 1406  2679  1499  1667  2455  29  54  31  34  50 
Datasheet   0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
Room 1530, 15th Floor, Building B, No. 18 Zhongguancun Street, Haidian District, Beijing Telephone: (010) 82350740 Postal Code: 100190
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved 京ICP证060456号 京ICP备10001474号-1 电信业务审批[2006]字第258号函 京公网安备 11010802033920号