2.4 GHz Wireless Serial Product
CL2510
Innovative
Technology
for a
Connected
World
THE FASTEST WAY TO WIRELESS
Based on Laird Technologies’ fifth generation 2.4GHz FHSS module, the LT2510,
the CL2510 product sets the standard for industrial RF communication. Available with a
RS-232 DB-9 connector and housed in a rugged enclosure, the CL2510 is an ideal choice
for wireless serial communications in industrial applications. As a wireless serial bridge
the CL2510 can replace thousands of feet of cable.
Optimized for point-to-point or point-to-multipoint networks and embedded with Laird
Technologies’ robust server-client protocol, the CL2510 permits an unlimited number of
clients to synchronize to a single server for low latency communications. The server and
all clients in a network can communicate with any radio in range via either addressed or
broadcast packets. A simple to use Windows Configuration Utility allows customers to
easily configure and test the transceivers.
With its field-proven FHSS air interface protocol, the CL2510 rejects RF noise, excels in
multipath scenarios, allows for co-located systems, and provides an extremely reliable
communication link. It also provides a more robust, but simpler, link than ZigBee for RF
applications that do not require a mesh topology.
With a throughput of up to 280 Kb/s, CL2510 delivers speedy data rates. In addition,
variable output power options (up to +17 dBm) enable communication over distances
that aren’t achievable with competing technologies. The radio sustains a standard
asynchronous serial data stream between two or more radios out of the box.
FEATURES
Easy to Use
• Standard Male DB-9 DCE serial interface
• Standard baud rates supported from 1200 to 230,400 bps
• RF Data rates of 280kbps or 500kbps, selectable
• Advanced configuration using AT Commands
Networking and Security
• Retries and Acknowledgements
• API Commands for advanced packet addressing
• Frequency Hopping Spread Spectrum for security and interference rejection
• Customizable RF Channel, System ID and Vendor ID
• Automatic Link Synchronization
• Low Latency and high throughput
global
solutions:
local
support
USA: +1.800.492.2320
Europe: +44.1628.858.940
Asia: +852.2268.6567
wirelessinfo@lairdtech.com
www.lairdtech.com/wireless
TM
2.4 GHz Wireless Serial Product
CL2510
Innovative
Technology
for a
Connected
World
SPEcIFIcATIOnS
Parameter
Interfaces
Serial Interface Connector
RF Connector
Power Connector
Operational
Network Topologies
Security
Number of Hopping Channels
Frequency Band
RF Data Rate
RF Technology
Output Power
Maximum radiated power (EIRP)
Range (Line of Sight with 2.5dBi antenna)
Sensitivity
Electrical/Environmental
Supply Voltage
Max Power
Temperature (Operating)
Temperature (Storage)
Physical
Dimensions
Weight
Certifications
FCC
IC
CE
RoHS
Yes
Pending
Pending
4.4 x 2.7 x 1.4 inches (11.18 x 6.86 x 3.56 cm)
6 oz (170g)
+6V to 30V DC
300mW
-40C to 80C
-50C to 85C
Point to Point, Point to multipoint
One byte System ID, two byte Vendor ID
43 or 79, user selectable
2400 MHz to 2471 MHz
280kbps or 500kbps, user selectable
Frequency Hopping Spread Spectrum
50mW conducted
100mW (CE), or 1000mW (FCC) depending on antenna
and country of use
Outdoor: 1.5miles (2.4km)
Indoor: 790ft (240m)
-98dBm at 280kbps RF Rate
-94dBm at 500kbps RF Rate
DB-9 Male (RS-232 DCE)
RP-SMA Jack
Center Positive 2.5mm Jack.
LWS-DS-CL2510 0310
Any information furnished by Laird Technologies, Inc. and its agents is believed to be accurate and reliable. All specifications are subject to change without notice. Responsibility for
the use and application of Laird Technologies materials rests with the end user, since Laird Technologies and its agents cannot be aware of all potential uses. Laird Technologies
makes no warranties as to the fitness, merchantability or suitability of any Laird Technologies materials or products for any specific or general uses. Laird Technologies shall not be
liable for incidental or consequential damages of any kind. All Laird Technologies products are sold pursuant to the Laird Technologies’ Terms and Conditions of sale in effect from
time to time, a copy of which will be furnished upon request. © Copyright 2010 Laird Technologies, Inc. All Rights Reserved. Laird, Laird Technologies, the Laird Technologies Logo,
and other marks are trade marks or registered trade marks of Laird Technologies, Inc. or an affiliate company thereof. Other product or service names may be the property of third
parties. Nothing herein provides a license under any Laird Technologies or any third party intellectual property rights.
京公网安备 11010802033920号
EEWORLD
