I have added a fat32 partition in uboot. Now there is a binfs partition, a 1M fat32 partition, and the rest is another fat32 partition. After the system starts, I can see part00, part01, and part*02 i...
The development board is pxa310 handheld platform development kit. The burning software is marvell(R)XDB JTAG Debugger(SDT2.1). The error that occurs during burning is: Executing Initialization Script...
I used to work on application software and rarely touched industrial control. The PLC instrument is Omron SYSMAC CPM2AH, which communicates via RS232 serial port. Currently, I only have some address t...
Main materials: LED guardrail lights; guardrail light mounting clips, waterproof transformers, LED guardrail light main controller, LED guardrail light sub-controller, Auxiliary materials: male and fe...
I saw the news these days that the domestic ARM 64-core processor beat the Intel x86 processor. I couldn't help but sigh that the technology development of our country is too fast. Now ARM is very pop...
All electronic design engineers and scientists have performed electrical signal analysis, or signal analysis for short. Through this basic measurement, they can gain insight into signal details and...[Details]
Introduction
Power subsystems are becoming more and more integrated into the overall system. Power systems have moved from being separate "essential dangerous devices" to being monitorable...[Details]
1. Introduction
At present, most lighting equipment still uses traditional energy for lighting. Making full use of solar energy as the energy supply for lighting equipment is of great si...[Details]
A standard cell
is an electrochemical
cell
used as a voltage reference standard in many electrical standards laboratories
. If properly maintained, standard cells are very stable. The ...[Details]
Overview:
This paper introduces a method of connecting a CAN-bus network with Ethernet to form a medium-sized remote monitoring/data transmission network.
CAN (Controller Area Network) is ...[Details]
Many battery-powered systems require a visual indicator to show when the battery needs to be replaced. LEDs are commonly used for this purpose, but they consume at least 10mA of current. This con...[Details]
1. Disadvantages of choosing too high a voltage level
Choosing too high a voltage level will result in too high an investment and a long payback period. As the voltage level increases, the...[Details]
Designing low power circuits while achieving acceptable performance is a difficult task. Doing so in
the RF
bands increases the challenge dramatically. Today, nearly everything has wireless...[Details]
LonWorks fieldbus technology is widely used, for example, in intelligent buildings, industrial control, environmental protection, etc. Echelon's LonWorks system has been used in the products of tho...[Details]
For the past
15
years, many have predicted that
the
8
-bit microcontroller would soon be gone. However, this was one of the most miscalculated predictions in the el...[Details]
This paper first proposed an elevator controller algorithm based on a finite state machine, and then designed a three-story elevator controller based on the algorithm. The correctness of the elevat...[Details]
0 Introduction
According to the definition of IEC/SC65C of the International Electrotechnical Commission, the digital, serial and multi-point communication data bus between the field equipment...[Details]
Conventional crystalline silicon solar cells are made on high-quality silicon wafers with a thickness of 350-450μm, which are sawn from pulled or cast silicon ingots. Therefore, more silicon materi...[Details]
No matter which processor you are learning, the first thing you need to understand is the registers and working mode of the processor.
ARM has 37 registers, including 31 general registers and ...[Details]
“Productivity determines production relations, and the development of productivity determines the change of production relations”, yes, society is always full of changes, and advanced science and t...[Details]