TECHNICAL DATA SHEET
Document number: TTDS-017
Issue: 5
Date: November 2011
D-SCE heat-shrinkable sleeves
Thin wall, thermally-stabilised radiation cross-linked polyolefin heat-shrinkable
tubing, assembled as organized cut sleeves in a “ladder” configuration.
3:1 shrink ratio.
Identification of wires and cables by computer-based printing onto sleeves.
Sleeves can also provide terminal insulation and strain relief. Suitable for
applications where exposure to organic fluids, especially oils, is required for
long periods at elevated temperatures. Especially suited to rail rolling stock and
aerospace applications. Printed sleeve meets the requirements of SNCF
specification NF F 00608 Categories A & H and BS EN50343 Appendix H and
also meets the material and performance requirements of SAE-AMS-DTL-
23053/6 Class 1.
Refer to TE ‘Identification TT Printer Product Ribbon Matrix’
Document 411-121005.
-55°C to +135°C (-67°F to +275°F).
135°C (275°F).
MATERIAL DESCRIPTION:
USE:
PRINT METHOD/RIBBON:
SERVICE TEMPERATURE:
MINIMUM RECOVERY
TEMPERATURE:
MAXIMUM STORAGE
TEMPERATURE:
COLORS:
HEAT AGEING:
40°C (104°F).
Yellow. Other colors available on request.
168 hours at 150°C (302°F)
Tensile Strength 15MPa minimum; Ultimate Elongation 300% minimum
Print legible AMS AS5942 - 20 rubs.
HEAT SHOCK:
4 hours at 215°C (419°F)
No cracking, dripping or flowing, Print legible; AMS AS5942 - 20 rubs.
168 hours at 85°C (185°F) and 85% RH, Print legible AMS AS5942 - 20 rubs.
HUMIDITY RESISTANCE:
Page 1 of 2
Business locations:
France: +33 (0) 476 099696 (Labels)
Germany: + 49 (0) 6074 89080
UK: + 44 (0) 1495 244000 (Labels)
Japan: + 81 (0) 44 900 5102
N America: + 1 401 751 6505 (East Coast)
France: + 33 (0) 134 20 21 22 (Other products)
UK: + 44 (0) 1793 528171 (Other products)
Singapore: + 65 (0) 4866 151
All the above information, including illustrations, is believed to be reliable. Users, however, should independently evaluate the suitability of each product for their application.
TE Connectivity makes no warranties as to the accuracy or completeness of the information and disclaims any liability regarding its use. TE Connectivity only obligations are
those in the Standard Terms and Conditions of Sale for this product and in no case will TE Connectivity be liable for any incidental, indirect or consequential damages arising
from the sale, resale, use or misuse of the product. TE Connectivity Specifications are subject to change without notice. In addition TE Connectivity reserves the right to make
changes in materials or processing, without notification to the Buyer, which do not affect compliance with any applicable specification.
TECHNICAL DATA SHEET
Document number: TTDS-017
Issue: 5
Date: November 2011
UV RESISTANCE:
250 hours (ASTM G154: 8 hours UVB at 1.35 W/M /nm followed by 4 hours
condensation at 50°C): Print Legible AMS AS5942 20 rubs
Rating 3 maximum (BS EN 60084-1-10 Variant 1).
Burn time 30 seconds maximum (ASTM D2671 Procedure B).
2% maximum (BS EN ISO 62 Procedure A).
24% minimum (BS EN ISO 4589 Part 2).
20MV/m minimum (ASTM D2671)
AMS AS5942 Clause 4.1 Adherence, 50 rubs.
MIL-STD-202 Method 215, Solvent Resistance.
NF F 00608 Sleeve Marking Adhesion, Types A and H
BS EN 50343 Appendix H
2
D-SCE heat-shrinkable sleeves
FUNGUS RESISTANCE:
FLAMMABILITY:
WATER ABSORPTION:
LIMITED OXYGEN INDEX:
DIELECTRIC STRENGTH:
PRINT PERMANENCE:
FLUID RESISTANCE:
Fluid immersion followed by AMS AS5942 Adherence, 20 rubs:
TEST
168 hours at 70°C (158°F)
72 hours at 50°C (122°F)
24 hours at 24°C (75°F)
24 hours at 24°C (75°F)
24 hours at 24°C (75°F)
24 hours at 24°C (75°F)
EFFECT
Print legible
Print legible
Print legible
Print legible
Print legible
Print legible
THREAT
Diesel fuel (BS 2869 Class A1)
IRM 902 Transformer oil (BS 148)
JP-8 Aircraft fuel (MIL-T-83133 )
Aviation gasoline (100/130)
Skydrol 500 hydraulic fluid
MIL-A-8243 Anti-icing fluid
See TE Connectivity specification RW 2028 for full D-SCE performance & dimensional details.
Some types of neoprene insulation used in jackets contain additives that can migrate to the surface and discolor the polyolefin
D-SCE sleeves. Any discoloration is dependent on the composition of the neoprene, combined with application conditions. Users
should independently evaluate the suitability of D-SCE sleeves for applications involving neoprene-jacketed cables.
Page 2 of 2
Business locations:
France: +33 (0) 476 099696 (Labels)
Germany: + 49 (0) 6074 89080
UK: + 44 (0) 1495 244000 (Labels)
Japan: + 81 (0) 44 900 5102
N America: + 1 401 751 6505 (East Coast)
France: + 33 (0) 134 20 21 22 (Other products)
UK: + 44 (0) 1793 528171 (Other products)
Singapore: + 65 (0) 4866 151
All the above information, including illustrations, is believed to be reliable. Users, however, should independently evaluate the suitability of each product for their application.
TE Connectivity makes no warranties as to the accuracy or completeness of the information and disclaims any liability regarding its use. TE Connectivity only obligations are
those in the Standard Terms and Conditions of Sale for this product and in no case will TE Connectivity be liable for any incidental, indirect or consequential damages arising
from the sale, resale, use or misuse of the product. TE Connectivity Specifications are subject to change without notice. In addition TE Connectivity reserves the right to make
changes in materials or processing, without notification to the Buyer, which do not affect compliance with any applicable specification.
Automotive Electronics
京公网安备 11010802033920号
EEWORLD
