-
1. Introduction
AS-Interface bus technology is an intelligent network that uses a single cable to connect sensors and actuators to controllers, transmit data, and provide power. It can be used...[Details]
-
introduction
Sudan's Muglad Oilfield is a large oilfield jointly invested, developed and constructed by a four-party consortium of China, Malaysia, Canada and Sudan. It consists of 8 satellite...[Details]
-
The rotor of the brushless DC motor used in electric bicycles is composed of 30 to 40 pieces of NdFeB magnets. Since the surface magnetic field strength of NdFeB magnets exceeds 500mT, the position se...[Details]
-
When you are sitting in the subway train, feeling the convenience and comfort brought by the underground rail train, at this time, in the control center, the "brain" of the subway, a group of people a...[Details]
-
One of the most common requirements of the automotive industry for automotive electronic systems is to achieve the best detection results in the smallest space. This is exactly the advantage of shunt ...[Details]
-
Two typical electric vehicle flasher circuits are given, and the parameters and specific instructions in the circuit are given. I hope it will be helpful to you!
1. This circuit consists of an...[Details]
-
Preface
For a new antenna, we usually care about its
three main performance indicators:
standing wave
coefficient, gain and radiation pattern. In a suitable microwave darkroom, these th...[Details]
-
The lighting system on the car not only allows the driver to actually understand the condition of the car, but also provides the necessary conditions for safe driving. The new generation of light ...[Details]
-
Zero voltage switch controller integrated circuits can be used to control resistive heater loads. This type of controller generates an output pulse when the mains passes zero to trigger the bidirec...[Details]
-
1 Introduction
In the 21st century, the development of computers has entered a stage full of opportunities - the post-PC era. After the PC, various forms of digital products have begun to becom...[Details]
-
Abstract: The DS2409 was originally designed to be used as a detection point (reader head) for access control and to reduce the bus load in large 1-Wire® networks.
The DS2409
was also used to i...[Details]
-
Each track should have independent transport interface control (4 in total), and each track should have independent connectors for input/output control.
(l) Electrical interface requirements
...[Details]
-
CAN bus is an open system, and its standard follows ISO's OSI seven-layer model, while the basic protocols of CAN only have physical layer protocol and data link layer protocol. In fact, the core tech...[Details]
-
introduction
Cadence Design Systems offers a comprehensive SystemC
TLM
-driven IP design and verification solution, including methodology guidance, high-level synthesis, TLM-aware verific...[Details]
-
ASA (VI curve) test is one of the most important test functions on the circuit online maintenance tester. This article briefly introduces the principle of ASA test from the perspective of use. It m...[Details]
FPGA/CPLD
京公网安备 11010802033920号
EEWORLD
