The properly and electrostatically measured taping materials are used for the components, but attention should be paid to the fact that there is some danger the parts absorb on the top
tapes to cause a failure in the mounting and the parts are destructed by static electricity (more than 1kV : 1J, 2A, 2B, 2E 0.5kV : 1E, Human Body Model 100pF 1.5kΩ) to change the
resistance in the conditions of an excessive dryness or after the parts are given vibration for a long time as they are packaged on the tapes. Similarly, care should be given not to apply the
excessive static electricity when mounting on the boards.
●
Ionic impurities such as flux etc. that are attached to these products or those mounted onto a PCB, negatively affect their moisture resistance, corrosion resistance, etc. The flux may
contain ionic substances like chlorine, acid, etc. while perspiration and saliva include ionic impurities like sodium (Na
＋
), chrorine (Cl
−
) etc. Therefore these kinds of ionic substances may
induce electrical corrosion when they invade into the products. Either thorough washing or using RMA solder and flux are necessary since lead free solder contains ionic substances.
Washing process is needed, before putting on moisture proof material in order to prevent electrical corrosion.
●
Please pay attention that the top of an iron does not direct touch to the components. There is a risk that may cause a change in resistance. Take care that another risk may happen that
the protecting coat is carbonized in an instant when touched directly by the top of the iron, also climatic-proof for electric corrosion or insulation of protecting coat may be dropped down.
Be sure not to give high temperature on the top of the iron as it will degrade the protecting coat.
●
Avoid storing components under direct sun rays, high temperature/humidity. Direct sun rays will cause quality change of taping and difficulty of keeping appropriate peeling strength. 5∼
35℃/35∼75%RH, there is no deterioration of solderability for 12 months, but take special care for storing, because condensation, dust, and toxic gas like hydrogen sulfide, sulfurous acid
gas, hydrogen chloride, etc. may drop solderability.
TI is a very generous company. For students, the chip performance is very high, enough to cope with various competitions and some daily small projects. First of all, I personally think that there are ...
[i=s]This post was last edited by paulhyde on 2014-9-15 09:22[/i]2011 Prediction and Control Radar DataI want to download other things that need download coins, so I have no choice but to charge
[[i]T...
Why is it that when a 24V encoder is selected in FM350-1, the SF light is always on after startup, and the FM350-1 cannot work? To check, first select the encoder type (24V) in the software configur...
[i=s]This post was last edited by jinglixixi on 2021-3-22 18:20[/i]Recently, I have been dealing with software that I have never used before. I often spend a lot of time searching and installing softw...
Using the GD32E503V routine, the SDIO polling method reads the 32G TF card and a timeout occurs:
sderr = sd_block_read((uint32_t *)buff, (uint64_t)((uint64_t)sector9), 512);
sector=0x2000
The returned...
TI Technology Forum
京公网安备 11010802033920号
EEWORLD
