Y1626138R000C9R datasheet, PDF

Datasheet> All Categories > Passive components> The resistor> Y1626138R000C9R

Y1626138R000C9R: DescriptionFixed Resistor, Metal Foil, 0.3W, 138ohm, 95V, 0.25% +/-Tol, -.2,.2ppm/Cel, 1506,; CategoryPassive components The resistor; File Size838KB，6 Pages; ManufacturerVishay; Websitehttp://www.vishay.com; Environmental Compliance

Download Datasheet Parametric View All

Y1626138R000C9R Overview

Fixed Resistor, Metal Foil, 0.3W, 138ohm, 95V, 0.25% +/-Tol, -.2,.2ppm/Cel, 1506,

Y1626138R000C9R Parametric

Parameter Name	Attribute value
Is it Rohs certified?	conform to
Objectid	860430486
Reach Compliance Code	compliant
Country Of Origin	Israel
ECCN code	EAR99
YTEOL	10
Other features	NON INDUCTIVE; ULTRA HIGH PRECISION
structure	Rectangular
Installation features	SURFACE MOUNT
Number of terminals	2
Maximum operating temperature	150 °C
Minimum operating temperature	-55 °C
Package height	0.64 mm
Package length	3.81 mm
Package form	SMT
Package width	1.57 mm
method of packing	TR
Rated power dissipation(P)	0.3 W
Rated temperature	70 °C
resistance	138 Ω
Resistor type	FIXED RESISTOR
size code	1506
surface mount	YES
technology	METAL FOIL
Temperature Coefficient	0.2 ppm/°C
Terminal surface	TIN SILVER COPPER OVER NICKEL
Terminal shape	WRAPAROUND
Tolerance	0.25%
Operating Voltage	95 V

Preview

Download Datasheet

View All

VSMP Series(0603,0805,1206,1506,2010,2010,(ZFoil)

VSMP Series (0603, 0805, 1206, 1506, 2512) 2512)

(Z Foil)

Ultra High Precision Foil Wraparound Surface Mount Chip Resistor

with TCR of ±0.05 ppm/°C and Power Coefficient of 5 ppm at

Rated Power and Load Life Stability of ±0.005% (50 ppm)

FEATURES

• Temperature coefficient of resistance (TCR):

0.2 ppm/°C typical (–55°C to +125°C, +25°C ref.)

• Resistance tolerance: to ±0.01%

• Power coefficient “∆R due to self heating”:

5 ppm at rated power

• Power rating: to 750 mW at +70°C (see table 3)

• Load life stability: to ±0.005% at 70°C, 2000 h

at rated power

• Resistance range: 5 Ω to 125 kΩ (for lower or higher

values, please contact us)

• Bulk Metal Foil resistors are not restricted to standard

values, we can supply specific “as required” values at

no extra cost or delivery (e.g. 1K2345 vs. 1K)

• Thermal stabilization time <1 s (nominal value achieved

within 10 ppm of steady state value)

• Electrostatic discharge (ESD) at least to 25 kV

• Short time overload: ≤0.005%

• Non inductive, non capacitive design

• Rise time: 1 ns effectively no ringing

• Current noise: 0.010 μV

RMS

/V of applied voltage

(<–40 dB)

• Voltage coefficient <0.1 ppm/V

(resistance values above 10 kΩ)

• Non inductive: <0.08 μH

• Non hot spot design

• Terminal finishes available: lead (Pb)-free, tin/lead alloy

• Matched sets are available on request

• Screening in accordance with EEE-INST-002 and

MIL-PRF-55342 available (see datasheet resistor

models 303133 to 303138)

• Quick prototype quantities available, please contact

foil@vpgsensors.com

Top View

(for date code print specification please refer to table 2)

INTRODUCTION

VSMP Series is the industry’s first device to provide high

rated power and excellent load life stability along with

extremely low TCR – all in one resistor.

One of the most important parameters influencing stability

is the Temperature Coefficient of Resistance (TCR).

Although the TCR of Bulk Metal

Foil is considered

extremely low, this characteristic has been further

refined over the years. The VSMP Series utilizes ultra

high precision Z Foil. The Z Foil technology provides a

significant reduction of the resistive element’s sensitivity

to ambient temperature variations (TCR) and to self

heating when power is applied (Power Coefficient of

Resistance, or PCR). Along with the inherently low PCR

and TCR, Z Foil technology also provides remarkably

improved load life stability, low noise and tight tolerances.

Vishay Foil Resistors’ (VFR) application engineering

department is available to advise and make

recommendations. For non-standard technical

requirements and special applications, please contact

us using the e-mail address in the footer below.

Table 1—Tolerance and TCR vs. Resistance

Value

(1)

(–55°C to +125°C, +25°C Ref.)

Resistance value

250 Ω to 125 kΩ

100 Ω to <250 Ω

50 Ω to <100 Ω

25 Ω to <50 Ω

10 Ω to <25 Ω

5 Ω to <10 Ω

(1)

Figure 1—Power Derating Curve

Percent of Rated Power

100

- 75

Tolerance

±0.01%

±0.02%

±0.05%

±0.1%

±0.25%

±0.5%

Typical TCR and

max. Spread

±0.2 ±1.8 ppm/°C

±0.2 ±2.8 ppm/°C

±0.2 ±3.8 ppm/°C

±0.2 ±7.8 ppm/°C

- 55 °C

+ 70 °C

For tighter performances and non-standard values lower than

5 Ω and above 125 kΩ, please contact application engineering

using the e-mail addresses in the footer below

- 50

- 25

+ 25 + 50 + 75 + 100 + 125 + 150 + 175

Ambient Temperature (°C)

* This datasheet provides information about parts that are RoHS-compliant and/or parts that are non-RoHS-compliant.

For example, parts with lead (Pb) terminations are not RoHS compliant. Please see the information/tables in this datasheet for details.

4128-EN

Rev 04-Mar-2020

For any questions, contact

foil@vpgsensors.com

www.vishayfoilresistors.com

Recommended Resources

Typical air conditioner remote control transmission circuit schematic diagram (Hisense air conditioner)

Negative voltage to positive voltage conversion circuit diagram 1

QJB gas monitoring alarm circuit

Mature and low-cost current sharing circuit

Analysis of Dual Relay 100~200W Fully Automatic Voltage Stabilizer

Single-ended flyback integrated switching regulated power supply circuit composed of CW1524

[Silicon Labs Development Kit Review] + Serial port printing temperature and humidity sensor Si7021 data: The EFM32PG22 Dev Kit has an I2C interface digital temperature and humidity sensor Si7021 on board. The main parameters are as follows:This serial port debugging and printing example uses SS5's powerf...; dql2016 Development Kits Review Area

Does PCI master mode transfer require the use of DMA on the motherboard?: When using a PCI device as a master device for master mode transmission, such as exchanging data with a physical memory area, is it necessary to use the DMA controller on the motherboard to complete i...; mef575 Embedded System

Adding MP3 functionality to the 1953 Biennophone: It looks like an old-fashioned radio, but it can receive AM , FM signals and multiple music formats such as MP3 .This is not a tube radio , but a 1953 Swiss Biennophone high-frequency radio that recei...; 凯哥 Creative Market

Advantages of balanced amplifiers: Balanced amplifiers are widely used in low-noise power amplification in the microwave band due to their low noise characteristics. They have better ....; 啊小罗 RF/Wirelessly

About lwip's httpd.c: voidhttpd_init(void){ struct tcp_pcb *pcb;DEBUG_PRINT("httpd_init");pcb = tcp_new(); //Create a new TCPtcp_bind(pcb, IP_ADDR_ANY, 80);pcb = tcp_listen(pcb);//Listentcp_accept(pcb, http_accept);//Recei...; yuanzhiqian Microcontroller MCU

[Modesim question] Please ask about the problem that many signals cannot be observed in modelsim6.2: I have been using version 5.6 , and I upgraded to 6.2SE because I changed to ISE 10.1. I used .do scripts to add waveform signal observations in modelsim before , but I found that many variables in th...; eeleader FPGA/CPLD

Shortcut: A0 A1 A2 A3 A4 A5 A6 A7 A8 A9 AA AB AC AD AE AF AG AH AI AJ AK AL AM AN AO AP AQ AR AS AT AU AV AW AX AY AZ B0 B1 B2 B3 B4 B5 B6 B7 B8 B9 BA BB BC BD BE BF BG BH BI BJ BK BL BM BN BO BP BQ BR BS BT BU BV BW BX BY BZ C0 C1 C2 C3 C4 C5 C6 C7 C8 C9 CA CB CC CD CE CF CG CH CI CJ CK CL CM CN CO CP CQ CR CS CT CU CV CW CX CY CZ D0 D1 D2 D3 D4 D5 D6 D7 D8 D9 DA DB DC DD DE DF DG DH DI DJ DK DL DM DN DO DP DQ DR DS DT DU DV DW DX DZ

Popular Components