303262-348R00-ABW datasheet, PDF

Datasheet> All Categories > Passive components> The resistor> 303262-348R00-ABW

303262-348R00-ABW: DescriptionFixed Resistor, Metal Foil, 0.1W, 348ohm, 22V, 0.05% +/-Tol, -3,3ppm/Cel, 0805,; CategoryPassive components The resistor; File Size775KB，7 Pages; ManufacturerVishay; Websitehttp://www.vishay.com

Download Datasheet Parametric View All

303262-348R00-ABW Overview

Fixed Resistor, Metal Foil, 0.1W, 348ohm, 22V, 0.05% +/-Tol, -3,3ppm/Cel, 0805,

303262-348R00-ABW Parametric

Parameter Name	Attribute value
Is it Rohs certified?	incompatible
Objectid	285158799
Reach Compliance Code	compliant
Country Of Origin	Israel
ECCN code	EAR99
YTEOL	10
structure	Rectangular
JESD-609 code	e0
Number of terminals	2
Maximum operating temperature	150 °C
Minimum operating temperature	-55 °C
Package height	0.64 mm
Package length	2.03 mm
Package shape	RECTANGULAR PACKAGE
Package form	SMT
Package width	1.27 mm
method of packing	Waffle Pack
Rated power dissipation(P)	0.1 W
resistance	348 Ω
Resistor type	FIXED RESISTOR
series	303262
size code	0805
technology	METAL FOIL
Temperature Coefficient	3 ppm/°C
Terminal surface	Tin/Lead (Sn/Pb)
Tolerance	0.05%
Operating Voltage	22 V

Preview

Download Datasheet

View All

303261, 303262, 303263, 303264, 303265, 303266

Ultra High-Precision Wrap-Around Chip echnologyConfiguration

UltraHigh-PrecisionWrap-AroundChipResistors,FRSMZ1FoilTResistors,

FRSM Z1 Foil Technology Configuration

Screen/Test Flow in Compliance with

EEE-INST-002 (Tables 2A and 3A, Film/Foil, Level 1) and MIL-PRF-55342

FEATURES

• Temperature coefficient of resistance (TCR) (see table 1

and fig. 3):

±0.2 ppm/°C typical (–55°C to +125°C, +25°C ref.)

• Resistance tolerance: to ±0.01%

• Power coefficient “∆R due to self heating”: 5 ppm at

rated power

• Power rating: to 400 mW at +70°C (see table 2)

•

Load life stability: ±0.02% after 2,000 hrs at 70°C at

rated power.

• Resistance range: 10 Ω to 75 kΩ (for higher and lower

values, please contact us)

• Bulk Metal

Foil resistors are not restricted to standard

values; specific “as required” values can be supplied at

no extra cost or delivery (e.g., 1K2345 vs. 1K)

• Thermal stabilization time: <1 s (within 10 ppm of steady

state value)

• Electrostatic discharge (ESD): at least to 25 kV

• Short time overload: ≤0.005% typical

• Rise time: 1 ns, effectively no ringing

• Current noise: <0.010 μV

RMS

/V of applied voltage

(<–40 dB)

• Non-inductive: <0.08 μH

• Non-hot spot design

• Terminal finishes available: tin/lead alloy

• Matched sets are available on request

• Fast prototype quantities are available. For more

information, please contact us.

• For higher temperature application up to +240°C and for

better performances, please contact us.

• Adding “U” to the model number (example: 303261U).

These units have all of the Table 2A (page 5) 100% tests

performed, with no destructive qualification testing

required (Table 3A, page 6). For more information,

please contact

foil@vpgsensors.com.

Top View

INTRODUCTION

The 303261 through 303266 series, tested per

EEE-INST-002 and MIL-PRF-55342, is based on the

new generation Z1 Foil Technology of the Bulk Metal

precision foil resistor elements by Vishay Foil Resistors

(VFR), which makes these resistors virtually insensitive

to destabilizing factors. Their element, based on the Z1

Foil Technology, is a solid alloy that displays the desirable

bulk properties of its parent material; thus, it is inherently

stable (remarkably improved load life stability of 25 ppm),

noise-free and withstands ESD to 25 kV or more. The

alloy is matched to the substrate and forms a single

entity with balanced temperature characteristics for an

unusually low and predictable TCR over a wide range

from –55°C to +150°C. Resistance patterns are photo-

etched to permit trimming of resistance values to very

tight tolerances.

The 303261 through 303266 series has a full wraparound

termination which ensures reliable handling during the

manufacturing process, as well as providing stability

during multiple thermal cycles.

Our application engineering department is available to

advise and make recommendations. For non-standard

technical requirements and special applications, please

Recommended Resources

CMOS line receiver

Charging circuit personal working principle diagram

Typical two-stage low-pass filter circuit

Feiyue 12D3 black and white TV audio OTL power amplifier circuit

Automatic charger circuit with manual trigger function

Bidirectional thyristor AC voltage regulation circuit

Suction cup electromagnet: I want to make a 24V battery suction cup electromagnet with an area of 400mmX500mm and a suction force of 15kg. What materials and equipment do I need and how to make it?...; 张灿辉 Industrial Control Electronics

The smart car uses Linux 2.6: [img]http://www.roboticfan.com/blog/UploadFiles/2007-8/221435205355.jpg[/img][img]http://www.roboticfan.com/blog/UploadFiles/2007-8/221435770766.jpg[/img] Hardware: 1. Car body 2. S3C2410A development...; 护花使者 MCU

GD32103E-EVAL Full-function evaluation board with screen: https://detail.tmall.com/item.htm?spm=a1z10.5-b.w4011-18883888937.65.c8162af80RiU46id=576897750536rn=2113700bcd9e6682e833730a455c6a29abbucket=19skuId=3880525425703This one is 80% new. I replaced the o...; apleilx Buy&Sell

I am using Wince5.0+EVC for development. How can I set up the network using a program?: I am using Wince5.0+EVC development, how can I use the program to set up a wireless network? For example, set up Wep encryption, set up IP address, DHCP, etc. Please give me some ideas....; yjqlife2008 Embedded System

Free application: Infineon's revolutionary photoacoustic spectroscopy (PAS) CO2 sensor, the legend of excessive CO2 leads to lack of attention: When the indoor CO2 concentration exceeds 1000 ppm , the human body will experience symptoms such as drowsiness, shortness of breath, lack of concentration , etc. If the concentration gradually increa...; EEWORLD社区 Sensor

Solution to Segment ISTACK Too Long when compiling TI BLE Stack with IAR 8.3: When compiling TI BLE Stack with IAR 8.3 or later versions, an error similar to the following will be reported [code]Error[e16]: Segment ISTACK (size: 0xc0 align: 0) is too long for segment definition...; southwolf1813 Wireless Connectivity

Shortcut: S0 S1 S2 S3 S4 S5 S6 S7 S8 S9 SA SB SC SD SE SF SG SH SI SJ SK SL SM SN SO SP SQ SR SS ST SU SV SW SX SY SZ T0 T1 T2 T3 T4 T5 T6 T7 T8 T9 TA TB TC TD TE TF TG TH TI TJ TK TL TM TN TO TP TQ TR TS TT TU TV TW TX TY TZ U0 U1 U2 U3 U4 U6 U7 U8 UA UB UC UD UE UF UG UH UI UJ UK UL UM UN UP UQ UR US UT UU UV UW UX UZ V0 V1 V2 V3 V4 V5 V6 V7 V8 V9 VA VB VC VD VE VF VG VH VI VJ VK VL VM VN VO VP VQ VR VS VT VU VV VW VX VY VZ W0 W1 W2 W3 W4 W5 W6 W7 W8 W9 WA WB WC WD WE WF WG WH WI WJ WK WL WM WN WO WP WR WS WT WU WV WW WY X0 X1 X2 X3 X4 X5 X7 X8 X9 XA XB XC XD XE XF XG XH XK XL XM XN XO XP XQ XR XS XT XU XV XW XX XY XZ Y0 Y1 Y2 Y4 Y5 Y6 Y9 YA YB YC YD YE YF YG YH YK YL YM YN YP YQ YR YS YT YX Z0 Z1 Z2 Z3 Z4 Z5 Z6 Z8 ZA ZB ZC ZD ZE ZF ZG ZH ZJ ZL ZM ZN ZP ZR ZS ZT ZU ZV ZW ZX ZY

Popular Components