Series 112, 113, & 114
Deci-Center
™
Jumpers
FEATURES:
• Aries offers a wide array of DIP jumper configurations and
wiring possibilities for all your programming needs.
• Reliable, electronically tested solder connections.
• DIP-end cable is potted to provide strain relief.
• Protective covers are also provided on header .
• Pitch bars help maintain .100 [2.54] conductor spacing.
• 10-color cable allows for easy identification and tracing.
• Consult factory for jumper lengths under 3.000 [76.20].
SPECIFICATIONS:
• Header body and pitch bar are black UL 94 V-0 Glass-filled
4/6 Nylon.
• Header pins are Brass, 1/2 hard.
• Pin plating is 10
μ
[.25μm] min. Gold per MIL-G-45204 over
50μ [1.27μm] min. Nickel per SAE-AMS-QQ-N-290.
• Cable insulation is UL Style 2697 Polyvinyl Chloride (PVC).
Note: Aries specializes in custom design and production. In addition to the
standard products shown on this page, special materials, platings, sizes, and
• Cable laminate is clear PVC, self-extinguishing.**
configurations can be furnished, depending on quantities. Aries reserves the
• .050 [1.27] pitch conductors are 28 AWG, 7/36 strand,
right to change product specifications without notice.
Tinned Copper per ASTM B 33 (.039 [.99] pitch conductors
ORDERING INFORMATION
are 26 AWG, 7/34 strand).
• Cable current rating=1 Amp @ 10°C [50°F] above ambient.
XX-XXX-XXX
• Cable voltage rating=300 Volts.
• Cable temperature rating=176°F [80°C].
No. of conductors
Jumper series:
• Cable capacitance=13.0 pf/ft. [42.7pf/meter] nominal
(see table)
112, 113, 114
@1 MHz.**
112X, 113X, 114X
• Crosstalk: 10’ sample, 5 ns rise time with 2 lines
Cable length in inches:
(see Data Sheet
driven. Near end=4.7%; Far end=4.3% nominal.**
EX: 3” = -003-/ 3.5 = -003.5-
No. 11009 for
• Propagation delay=1.5 ns/ft. [4.9 ns/meter] nominal.**
min. length =3” [76.20mm]
wiring table)
•Insulation resistance=1010 Ohms (10 ft. [3 meters] min.).
**Note: Applies to .050 [1.27] pitch cable only.
A
LL DIMENSIONS
:
INCHES
[
MILLIMETERS
]
MOUNTING CONSIDERATIONS:
•Suggested PCB hole size=.033 ± .002 [.86 ± .05].
“X”=(NO. OF CONDUCTORS - 1) X .100 [2.54]
“L” ± .125
All tolerances ± .005 [.13]
unless otherwise specified
Centers “C ”
.300 [7.62]
.400 [10.16]
.600 [15.24]
Dim. “ D ”
.395 [10.03]
.495 [12.57]
.695 [17.65]
Available Sizes
4 thru 20
22
24, 28, 40
Numbers
shown pin
side for
reference
only.
See Data Sheet No.
11009 for other
configurations and
additional information.
SERIES 112
11008
http://www.arieselec.com • info@arieselec.com
REV. F
PRINTOUTS OF THIS DOCUMENT MAY BE OUT OF DATE AND SHOULD BE CONSIDERED UNCONTROLLED
Bristol, PA USA
TEL: (215) 781-9956
FAX: (215) 781-9845
Linux and Android
京公网安备 11010802033920号
EEWORLD
