MBA/SMA 0204 VG06, MBB/SMA 0207 VG06, MBE/SMA 0414 VG06
www.vishay.com
Vishay Beyschlag
Leaded Metal Film Resistors With Established Reliability
FEATURES
• IECQ-CECC approved to EN 140101-806,
version E
• Established reliability, failure rate level E7
• Advanced thin film technology
• Intrinsic sulfur resistance
• Single lot date code
LINKS TO ADDITIONAL RESOURCES
D
D
3
3
3D Models
• Material categorization: for definitions of compliance
please see
www.vishay.com/doc?99912
APPLICATIONS
MBA/SMA 0204 VG06,
MBB/SMA 0207 VG06,
and
MBE/SMA 0414 VG06 leaded metal film resistors with
established reliability are the perfect choice for all
high-reliability applications typically found in military, aircraft
and spacecraft electronics. These versions supplement the
families of professional and precision leaded resistors
MBA/SMA 0204, MBB/SMA 0207, and MBE/SMA 0414.
• Military
• Avionics
• Space
TECHNICAL SPECIFICATIONS
DESCRIPTION
DIN size
Size code (EN/CECC style)
Resistance range
Resistance tolerance
Temperature coefficient
Rated dissipation,
P
70 (1)
Operating voltage,
U
max.
AC
RMS
or DC
Permissible voltage against
ambient (insulation):
1 min;
U
ins
Assessed failure rate level
Quality factor,
Q
Failure rate, FIT
observed
300 V
500 V
E7 = 10
-7
/h
0.1
< 0.1 x 10
-9
/h
800 V
(2)
0.4 W
200 V
MBA/SMA 0204 VG06
0204
A
1
to 5.11 M; 0
MBB/SMA 0207 VG06
0207
B
1
to 10 M; 0
± 1 %; ± 0.1 %
± 50 ppm/K; ± 15 ppm/K
0.6 W
350 V
(2)
1 W
(2)
500 V
MBE/SMA 0414 VG06
0414
D
1
to 21.5 M
Notes
• These resistors do not feature a limited lifetime when operated within the permissible limits. However, resistance value drift increasing over
operating time may result in exceeding a limit acceptable to the specific application, thereby establishing a functional lifetime
• The failure rate level E7 (10
-7
/h,
Q
= 0.1), corresponding to MIL Level R, is superior to level E6 (10
-6
/h,
Q
= 0.3) or level E5 (10
-5
/h,
Q
= 1)
and thus may be used as a replacement
(1)
These specification details apply to the products ± 50 ppm/K; ±1 %. Please find more details for all product versions below
(2)
These data provide a user advantage over the ratings and requirements of EN140101-806
Revision: 12-Mar-2020
Document Number: 28768
1
For technical questions, contact:
specialresistors@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
www.vishay.com/doc?91000
MBA/SMA 0204 VG06, MBB/SMA 0207 VG06, MBE/SMA 0414 VG06
www.vishay.com
Vishay Beyschlag
TECHNICAL SPECIFICATIONS FOR PRODUCTS ± 50 ppm/K; ± 1 %
DESCRIPTION
Rated dissipation,
P
70
Permissible film temperature,
F max.
Operating temperature range
Max. resistance change at
P
70
for resistance, |R/R| max., after:
1000 h
8000 h
1
to 332 k
0.5 %
1%
MBA/SMA 0204 VG06
0.4 W
MBB/SMA 0207 VG06
0.6 W
155 °C
-55 °C to +155 °C
1
to 1 M
0.5 %
1%
1
to 2.43 M
0.4 %
(1)
0.8 %
(1)
MBE/SMA 0414 VG06
1 W
(1)
Note
(1)
These data provide a user advantage over the ratings and requirements of EN140101-806
TECHNICAL SPECIFICATIONS FOR PRODUCTS ± 15 ppm/K; ± 0.1 %
DESCRIPTION
Rated dissipation,
P
70
Permissible film temperature,
F max.
Operating temperature range
Max. resistance change at
P
70
for resistance, |R/R| max., after:
1000 h
8000 h
100
to 221 k
0.25 %
0.5 %
MBA/SMA 0204 VG06
0.25 W
MBB/SMA 0207 VG06
0.4 W
125 °C
-55 °C to 125 °C
100
to 499 k
0.15 %
(1)
0.5 %
100
to 470 k
0.25 %
0.5 %
MBE/SMA 0414 VG06
0.65 W
(1)
Note
(1)
These data provide a user advantage over the ratings and requirements of EN140101-806
TEMPERATURE COEFFICIENT AND RESISTANCE RANGE
TYPE / SIZE
TCR
± 50 ppm/K
MBA/SMA 0204 VG06
± 15 ppm/K
Jumper
(1)
;
I
max.
= 3 A
± 50 ppm/K
MBB/SMA 0207 VG06
± 15 ppm/K
Jumper
(1)
;
I
max.
= 5 A
± 50 ppm/K
MBE/SMA 0414 VG06
± 15 ppm/K
± 0.1 %
TOLERANCE
±1%
± 0.1 %
10 m
±1%
± 0.1 %
10 m
±1%
RESISTANCE
1
to 5.11 M
100
to 221 k
0
1
to 10 M
100 to 499 k
0
1
to 21.5 M
100
to 470 k
E-SERIES
E96
E192
-
E96
E192
-
E96
E192
Notes
• Other TCR or tolerances, or combinations thereof, or resistance values from other E-series than given are not permitted in EN 140101-806
for version E products
(1)
The temperature coefficient of resistance (TCR) is not specified for 0
jumpers
Revision: 12-Mar-2020
Document Number: 28768
2
For technical questions, contact:
specialresistors@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
www.vishay.com/doc?91000
MBA/SMA 0204 VG06, MBB/SMA 0207 VG06, MBE/SMA 0414 VG06
www.vishay.com
Vishay Beyschlag
PACKAGING
TYPE / SIZE
CODE
C1
MBA/SMA 0204 VG06
CT
C1
MBB/SMA 0207 VG06
CT
MBE/SMA 0414 VG06
C1
5000
1000
63 mm
5000
1000
Taped acc.
IEC 60286-1,
fan-folded in a box
5 mm
53 mm
324 mm x 77 mm x 83 mm
377 mm x 85 mm x 47 mm
QUANTITY
1000
53 mm
330 mm x 75 mm x 55 mm
184 mm x 75 mm x 42 mm
PACKAGING STYLE
WIDTH
PITCH
PACKAGING
DIMENSIONS
184 mm x 75 mm x 42 mm
Notes
• Width is the nominal spacing between tapes, with the nominal tape width on both sides being 6 mm, and pitch is the nominal standard
spacing between components; tolerances apply according to IEC 60286-1
• The tape on one side is marked with a black print every 100
th
component position
PART NUMBER AND PRODUCT DESCRIPTION
PART NUMBER: MBB0207CE3523BCT00
PART NUMBER: MBB0207CZ0000ZCT00
M
M
B
B
TYPE / SIZE
B
B
0
0
2
2
VERSION
0
0
7
7
C
C
TCR
E
Z
3
0
5
0
RESISTANCE
2
0
3
0
B
Z
TOLERANCE
F
=±1%
B
= ± 0.1 %
Z
= jumper
C
C
T
T
0
0
PACKAGING
C1
CT
0
0
MBA/SMA 0204
MBB/SMA 0207
MBE/SMA 0414
C
= EN 140101-806,
version E,
failure rate level E7
C
= ± 50 ppm/K
E
= ± 15 ppm/K
Z
= jumper
3 digit value
1 digit multiplier
MULTIPLIER
8
= *10
-2
9
= *10
-1
0
= *10
0
1
= *10
1
2
= *10
2
3
= *10
3
4
= *10
4
5
= *10
5
0000
= Jumper
PRODUCT DESCRIPTION: MBB/SMA 0207-15 0.1 % VG06 CT 352K
PRODUCT DESCRIPTION: MBB/SMA 0207 VG06 CT 0R0
MBB/SMA 0207
MBB/SMA 0207
TYPE / SIZE
MBA/SMA 0204
MBB/SMA 0207
MBE/SMA 0414
-15
-
TCR
± 50 ppm/K
± 15 ppm/K
0.1 %
-
TOLERANCE
±1%
± 0.1 %
VG06
VG06
VERSION
VG06
= EN 140101-806,
version E,
failure rate level E7
CT
CT
PACKAGING
C1
CT
352K
0R0
RESISTANCE
49R9
= 49.9
352K
= 352 k
0R0
= jumper
Notes
• The products can be ordered using either the PART NUMBER or the PRODUCT DESCRIPTION
• Products within a packaging unit are single lot date code
Revision: 12-Mar-2020
Document Number: 28768
3
For technical questions, contact:
specialresistors@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
www.vishay.com/doc?91000
MBA/SMA 0204 VG06, MBB/SMA 0207 VG06, MBE/SMA 0414 VG06
www.vishay.com
Vishay Beyschlag
EN 140101-806 ORDERING INFORMATION
Example of the ordering information for a resistor: MBB/SMA 0207-15 0.1 % VG06 352K
EN140101-806EZBP352KBE7
Example of the ordering information for a zero ohm jumper: MBB/SMA 0207 VG06 0R0
EN140101-806EZB-0R00-E7
The elements used in the component number have the following meaning:
EN140101-806
EZ
B
P
EN detail specification number
Assessment level for the zero-defect approach
Style (size)
Temperature coefficient, according to EN 60062
R = ± 50 ppm/K; P = ± 15 ppm/K
352K
B
Resistance, according to EN 60062, 4 characters
Tolerance on rated resistance, according to EN 60062
F = ± 1 %; B = ± 0.1 %
E7
Failure rate level according to EN 60115-1, annex ZR
Notes
• The ordering information according to EN 140401-806:2007 shown above succeeds and replaces the ordering information according to its
predecessor CECC 40101-806, for example:
with
CECC 40101-806 S B E 352K B E7
S
Assessment level, where EZ is successor to and superior replacement for S
E
Temperature coefficient, according to the detail specification
C = ± 50 ppm/K; E = ± 15 ppm/K
• EN 140101-806 succeeds the prior specification CECC 40101-806 and a huge variety of historical specifications CECC 40101-0xx.
Preceding specifications on resistors with established reliability (now “version E”) have been CECC 40101-046 and CECC 40101-047
Revision: 12-Mar-2020
Document Number: 28768
4
For technical questions, contact:
specialresistors@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
www.vishay.com/doc?91000
MBA/SMA 0204 VG06, MBB/SMA 0207 VG06, MBE/SMA 0414 VG06
www.vishay.com
DESCRIPTION
Production is strictly controlled and follows an extensive set
of instructions established for reproducibility. A
homogeneous film of metal alloy is deposited on a high
grade ceramic body (Al
2
O
3
) and conditioned to achieve the
desired temperature coefficient. Plated steel termination
caps are firmly pressed on the metallised rods. A special
laser is used to achieve the target value by smoothly cutting
a helical groove in the resistive layer without damaging the
ceramics. Connecting wires of electrolytic copper plated
with fused pure tin are welded to the termination caps. The
resistor elements are covered by a light blue protective
coating designed for electrical, mechanical and climatic
protection. Five color code rings designate the resistance
value and tolerance in accordance with
IEC 60062
(1)
.
The result of the determined production is verified by an
extensive testing procedure performed on 100 % of the
individual resistors. For IECQ-CECC approved products,
this includes pulse load screening for the elimination of
products with a potential risk of early life failures according
to EN 140101-806, 2.1.2.2 (feasible for
R
10
).
Only
accepted products are stuck directly on the adhesive tapes
in accordance with
IEC 60286-1
(1)
. Products within a
package unit are from the same production lot and carry the
same date code.
Vishay Beyschlag
MATERIALS
Vishay acknowledges the following systems for the
regulation of hazardous substances.
• IEC 62474, Material Declaration for Products of and for the
Electrotechnical Industry, with the list of declarable
substances given therein
(2)
• The Global Automotive Declarable Substance List
(GADSL)
(3)
• The REACH regulation (1907/2006/EC) and the related list
of substances with very high concern (SVHC)
(4)
for its
supply chain
The products do not contain any of the banned substances
as per IEC 62474, GADSL, or the SVHC list, see
www.vishay.com/how/leadfree.
Hence the products fully comply with the following
directives:
• 2000/53/EC End-of-Life Vehicle Directive (ELV) and
Annex II (ELV II)
• 2011/65/EU Restriction of the Use of Hazardous
Substances
Directive
(RoHS)
with
amendment
2015/863/EU
• 2012/19/EU Waste Electrical and Electronic Equipment
Directive (WEEE)
Vishay pursues the elimination of conflict minerals from its
supply chain, see the Conflict Minerals Policy at
www.vishay.com/doc?49037.
ASSEMBLY
The resistors are suitable for processing on lead forming and
cropping equipment and automatic insertion machines.
They are suitable for automatic wave or reflow soldering,
including miniature wave selective soldering. Solderability is
specified for 2 years after production or requalification,
however, the permitted storage time is 20 years.
The resistors are completely lead (Pb)-free, the fused pure
tin plating provides compatibility with lead (Pb)-free
soldering processes. The immunity of the plating against tin
whisker growth has been proven under extensive testing.
The encapsulation is resistant to all cleaning solvents
commonly used in the electronics industry, including
alcohols, esters and aqueous solutions. The suitability of
conformal coatings, potting compounds, and their
processes, if applied, shall be qualified by appropriate
means to ensure the long-term stability of the whole system.
APPROVALS
The resistors are approved within the IECQ-CECC Quality
Assessment System for Electronic Components to the detail
specification
EN 140101-806
which refers to
EN 60115-1,
EN 140100
and the variety of environmental test procedures
of the
IEC 60068
(1)
series.
Conformity is attested by the use of the
CECC
logo ( ) as
the Mark of Conformity on the package label.
Vishay
Beyschlag
has
achieved
“Approval
of
Manufacturer”
in accordance with
IECQ 03-1.
The release
certificate for
“Technology Approval Schedule”
in
accordance with
CECC 240001
based on
IECQ 03-3-1
is
granted for the Vishay Beyschlag manufacturing process.
The Vishay Beyschlag production facility is registered with
the CAGE code D9539.
RELATED PRODUCTS
A wider range of TCR, tolerance and resistance values, plus
the option of values from a different E series is available with
products approved to
EN 140101-806,
version A, without
established reliability, nominal failure rate level E0 (Quality
factor
Q
= 3). See the datasheets:
• “Professional Leaded Metal Film Resistors”
(www.vishay.com/doc?28766)
• “Precision Leaded Metal Film Resistors”
(www.vishay.com/doc?28767)
Notes
(1)
The quoted IEC standards are also released as EN standards with the same number and identical contents
(2)
The IEC 62474 list of declarable substances is maintained in a dedicated database, which is available at
http://std.iec.ch/iec62474
(3)
The Global Automotive Declarable Substance List (GADSL) is maintained by the American Chemistry Council, and available at
www.gadsl.org
(4)
The SVHC list is maintained by the European Chemical Agency (ECHA) and available at
http://echa.europa.eu/candidate-list-table
Revision: 12-Mar-2020
Document Number: 28768
5
For technical questions, contact:
specialresistors@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
www.vishay.com/doc?91000
京公网安备 11010802033920号
EEWORLD
