302075-10ZTP132K00AB datasheet, PDF

Datasheet> All Categories > Passive components> The resistor> 302075-10ZTP132K00AB

302075-10ZTP132K00AB: DescriptionFixed Resistor, Metal Foil, 2.5W, 132000ohm, 600V, 0.05% +/-Tol, -.2,.2ppm/Cel,; CategoryPassive components The resistor; File Size456KB，6 Pages; ManufacturerVishay; Websitehttp://www.vishay.com; Environmental Compliance

Download Datasheet Parametric View All

302075-10ZTP132K00AB Overview

Fixed Resistor, Metal Foil, 2.5W, 132000ohm, 600V, 0.05% +/-Tol, -.2,.2ppm/Cel,

302075-10ZTP132K00AB Parametric

Parameter Name	Attribute value
Is it Rohs certified?	conform to
Objectid	853062158
Reach Compliance Code	compliant
Country Of Origin	Israel
ECCN code	EAR99
YTEOL	10
structure	Hermetically Sealed
JESD-609 code	e3
Lead diameter	0.645 mm
Lead length	25.4 mm
Number of terminals	4
Maximum operating temperature	125 °C
Minimum operating temperature	-55 °C
Package diameter	12.7 mm
Package length	38.1 mm
Package form	4 Terminals
method of packing	Bulk
Rated power dissipation(P)	2.5 W
resistance	132000 Ω
Resistor type	FIXED RESISTOR
series	HZ(OTHER)
technology	METAL FOIL
Temperature Coefficient	0.2 ppm/°C
Terminal surface	Tin (Sn)
Tolerance	0.05%
Operating Voltage	600 V

Preview

Download Datasheet

View All

HZ Series (Z-Foil) with Zero TCR

Vishay Foil Resistors

New Generation of Secondary Standards Hermetically Sealed Construction Ultra High

Precision Z-Foil Technology Resistors with TCR of ± 0.2 ppm/°C, Tolerance of ± 0.001 %

and Load Life Stability of ± 0.002 % (Metrology, Laboratory, Instrumentation, Industrial)

FEATURES



Temperature coefficient of resistance (TCR):

± 0.2 ppm/°C typical (- 55 °C to + 125 °C,

+ 25 °C ref.). For ultra high performances

(instrumentation and metrology) please refer to

the last page



Resistance range: 5



to 1.1 M (higher or lower values of

resistance available)



Foil resistors are not restricted to standard values; specific

“as required” values can be supplied at no extra cost or

delivery (e.g. 1K2345 vs. 1K)



Power coefficient “R due to self heating”:

5 ppm at rated power with the Z-Foil technology



Tolerance:

to ± 0.001 % (10 ppm)



Load life stability to ± 0.002 % (20 ppm) at 25 °C, 2000 h

at rated power



Load life stability, can be considerably improved

through in-house stabilization



Shelf life stability: 2 ppm for at least 6 years

(unaffected by humidity)



Electrostatic discharge (ESD) up to 25 000 V



Power rating: 0.3 W to 2.5 W at + 25 °C (depending on

model - see table 2)



Non-inductive, non-capacitive design



Non hot spot design



Rise time: 1 ns effectively no ringing



Current noise: 0.010 µV

RMS

/V of applied voltage (< - 40 dB)



Thermal EMF: 0.05 µV/°C typical



Voltage coefficient: < 0.1 ppm/V



Thermal stabilization time < 1 s (nominal value achieved

within 10 ppm of steady state value)



Non-inductive: < 0.08 µH



Terminal finish available: lead (Pb)-free or tin/lead alloy



Impervious to harmful environments - oil filled



Prototype quantities available in just 5 working days

or sooner. For more information, please contact

foil@vishaypg.com



For better performances (values, TCR, tolerance, stability),

please contact us

INTRODUCTION

The Z-Foil based oil filled, hermetically sealed HZ Series

resistors represent an industry breakthrough. The hermetic

sealing eliminates the ingress of moisture and oxygen, while

the oil acts as a thermal conductor, thus eliminating

long-term degradation elements of unsealed resistors, while

at the same time allowing the device to accept short periods

of overload without degradation.

The Z-Foil technology provides a significant reduction of the

resistive components, sensitivity to ambient temperature

variations (TCR) and applied power changes (PCR). When

combined with the hermetic sealing and oil filling, the

HZ Series resistors become

the most precise and stable

resistors available.

They are used as the most precise

secondary standards for ultra precision metrology.

With accuracies of ± 0.001 % (10 ppm) and a resistance

range from 5



to 1.1 M and long term shelf life of less than

2 ppm, these devices are virtually secondary standards that

can be carried in sets for daily or periodic calibration of

factory measurement equipment.

The HZ Series is available with laboratory and metrology

level precision and long-term stability with additional

in-house oriented processes such as: chip stabilization,

special TCR plotting, additional treatments for ultra

stability and special post manufacturing operations

(PMO). (Please refer to the last page)

TABLE 1 - TCR VS. RESISTANCE VALUE

RESISTANCE VALUE

()

TYPICAL TCR AND

MAX. SPREAD

(- 55 °C to + 125 °C, + 25 °C ref.)

(ppm/°C)

± 0.2 ± 2

± 0.2 ± 3

± 0.2 ± 4

FIGURE 1 - SHELF LIFE - VHA518-11

12K9 VS. QHE

0.9

0.8

0.7

0.6

0.5

0.4

0.3

0.2

0.1

- 0.1

100 200 300 400 500 600 700 800 900 1000

100 to < 1M1

50 to < 100

5 to < 50

Note

• For maximum TCR < 1 ppm/°C, see VHP100 and contact

application engineering

Resistance Change (ppm)

Time (Days)

Document Number: 63120

Revision: 25-Mar-10

For any questions, contact:

foil@vishaypg.com

www.foilresistors.com

Recommended Resources

Inductor coil short circuit test circuit

STK441 audio IC circuit diagram

Voice-activated switch and corresponding amplifier circuit diagram

Cordless telephone pilot oscillator and FM demodulator

MAX791 forms a microprocessor monitor

Constant current charging of button batteries

How many methods are there to transfer netlists between Protel99se and Cadence?: I am going to make a board recently. The netlist I was given is in Protel99se. How can I convert it to work with Cadence? Please advise....; hostmkmk PCB Design

Standard output redirection problem: The board has an Ethernet port and a serial port. The serial port is used for message communication and the Ethernet port is used for log output. printf outputs logs to the standard output device, but...; zhouy0818 Embedded System

Summary report after seeking help: Correctly and simply speaking, we should use pointers to static class members instead of pointers to class members. As John_Lee's analysis of the two methods shows, the latter really makes a simple pr...; 黑衣人 MCU

The receive interrupt has never been entered, but there is a value in the receive interrupt array register: I set a power-off receiving interrupt, and I have been waiting for it since the program started. Unfortunately, it has never entered the interrupt. But the strange thing is that there are values in th...; 面纱如雾 Microcontroller MCU

Show the WEBENCH design process + a set of multi-power supply ±18V, 9V, 5V, 4V voltage design: [i=s]This post was last edited by qwqwqw2088 on 2014-8-2 23:02[/i] 1. Design topic: A set of multi-power supply ±18V, 9V, 5V, 4V voltage design 2. Design process Login interface [url=http://www.ti.com...; qwqwqw2088 Analogue and Mixed Signal

Please teach me the implementation principle and related information of virtual disk technology: The relationship between the diskless client's memory and the server's disk image file is established, but how do they correspond, what is the format, and how are they not limited by the size of physi...; cdj86cdj86 Embedded System

Shortcut: A0 A1 A2 A3 A4 A5 A6 A7 A8 A9 AA AB AC AD AE AF AG AH AI AJ AK AL AM AN AO AP AQ AR AS AT AU AV AW AX AY AZ B0 B1 B2 B3 B4 B5 B6 B7 B8 B9 BA BB BC BD BE BF BG BH BI BJ BK BL BM BN BO BP BQ BR BS BT BU BV BW BX BY BZ C0 C1 C2 C3 C4 C5 C6 C7 C8 C9 CA CB CC CD CE CF CG CH CI CJ CK CL CM CN CO CP CQ CR CS CT CU CV CW CX CY CZ D0 D1 D2 D3 D4 D5 D6 D7 D8 D9 DA DB DC DD DE DF DG DH DI DJ DK DL DM DN DO DP DQ DR DS DT DU DV DW DX DZ

Popular Components