The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
0.6mm Pitch Stacking Height 3mm to 16mm Connector
FX8, FX8C Series
FX8 Series
FX8C Series
Note that FX8 series and FX8C series are not mated with each other.
■Features
1. Stacking Height 3mm to 16mm available
The board to board stacking height can correspond to
3mm~16mm.
●
Stacking Height 3,4mm-FX8 Series
2. SMT Coplanarity
The coplanarity of the SMT solder area lead is maintained at
the high accuracy of less than 0.1mm.
3,4mm
3. Mating Guide
The very small and guide rib is provided, and secures
±0.6mm
self-alignment, considering the mating operativity into accounts.
4. Mis-insertion Prevention
The boss prevents mis-insertion in the board to cause due to
the boss position and boss diameter.
●
Stacking Height 5
to
16mm-FX8C Series
5 to 16mm
■Applications
Note pc, business equipments, which require miniaturization or light-weight
A166
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose
Series●0.6mm
at www.hirose-connectors.com, or contact your Hirose
Connector
FX8, FX8C
website RoHS search
Pitch Stacking Height 3mm to 16mm
sales representative.
FX8 Series
■Product
Specifications
Rating
Current rating 0.4A
Voltage rating 100V AC
Operating Temperature Range
-55ç to +85ç
Note 1.
Operating Humidity Range
-40%
to
80%
Storage Temperature Range
-10ç to +60ç
Note 2.
Storage Humidity Range 40%
to
70%
Condition
250V DC
300V AC/1 minute
100mA
Item
1. Insulation Resistance
2. Withstanding voltage
3. Contact Resistance
4. Vibration
1000M
ohms
min
Specification
No flashover or insulation breakdown.
45m
ohms
max.
No electrical discontinuity of 1μs or more
Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions.
(-55ç:
30 minutes, 15
to
35ç: 2
to
3 minutes
(-85ç:
30 minutes, 15
to
35ç: 2
to
3 minutes) 5 cycles
50 cycles
5.
Humidity (Steady state)
Contact resistance: 55m
ohms
max.: Insulation resistance: 100M
ohms
min.
96 hours at temperature of 40ç and humidity of 90% to 95%
embossed tape packaging product is prepared for all number of contacts, except for 140 contacts.
A167
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have
Series●0.6mm Pitch
discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
FX8, FX8C
been discontinued, or will be
Stacking Height 3mm to 16mm Connector
BStacking
Height Variation
●Single
Product
FX8-**P-SV
FX8-**S-SV
3mm
FX8-**P-SV1
4mm
3 to 4
BMating
Sectional View
(The above illustration represents the stacking height 3mm type.)
A168
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose
Series●0.6mm
at www.hirose-connectors.com, or contact your Hirose
Note 1: To order the tube packaging product, please determine a quantity for delivery,multiplying the tube package product by an integer.
Note 2: The embossed tape package product is prepared for the entire number of contacts, except for 140 contacts. In addition, the product will be sold
by the reel unit when 1 reel = 1000 pieces. Please refer to the delivery form item on page A172 for details.
Note 3: Tray packaging product is not for board placement with automatic equipment.
A169
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have
Series●0.6mm Pitch
discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
In the EW8051 project, there are two files dmaAlloCannel.c and IRWPAN.h that need to use the functions in hal.h. I have added the header file include "hal.h" to dmaAlloCannel.c and IRWPAN.h. However, ...
Added [HKEY_LOCAL_MACHINE\SYSTEM\GDI] "FontLinkMethods"=dword:1 [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\FontPath] "FontPath"="\\Hard Disk\\Font" to project.reg; The directory where the font file is loc...
National Semiconductor Corporation (National Semiconductor Corporation) recently announced the launch of three high power density regulators, LM2830 , LM2831 and LM2832, adding more models to this typ...
When designing circuits, we often encounter the concepts of open drain and open collector. Although I knew the basic usage when I was in school and never encountered any problems in design, a colleagu...
The design of a new switching power supply is studied. It adopts a phase-shifted full-bridge PWM control circuit, outputs a large power, and has the advantages of small size, light weight, and high sw...
introduction
1 The significance of using RTOS on MSP430
It is understandable that it is meaningless to use RTOS on MSP430. Because the hardware resources of MSP430 are limited (for exampl...[Details]
Sailing is gaining more and more attention. How to use modern technology to assist training and improve competition results is particularly important. Considering the real-time data collection in t...[Details]
Due to the significant increase in electronic devices in automotive and industrial applications, the automotive and industrial markets continue to play an important role in China's electronics in...[Details]
Aromatic gases are widely present in food, medicine, cosmetics and various daily chemical products, such as snacks, liquor, spices, Chinese herbal medicines, plasters, perfumes, soaps, shampoos, et...[Details]
As a simple and practical input device, buttons have been used in various microcontroller application systems and are ubiquitous. However, the buttons used in different practical occasions are also...[Details]
Abstract: Aiming at the needs of coal-rock acoustic emission signal monitoring system, a data acquisition circuit with 24-bit resolution and 16-channel synchronous data acquisition function is desi...[Details]
The TPS92210 is a single-stage LED lighting pulse width modulation (PWM) controller. The TRIAC dimmable solution not only regulates the LED current, but also achieves a power factor close to 1. The...[Details]
Currently, each country is developing its own USB interface
charging specifications
, which leads to a major problem that a USB interface
charging
device manufactured in one country...[Details]
Temperature compensated quartz crystal oscillator (TCXO) is widely used as a high-precision frequency source in communication systems, radar navigation systems, precision measurement and control sy...[Details]
Car lights, whether headlights, fog lights or tail lights, play an important role in driving safety. However, the material of the car lights determines that the probability of damage in a collision...[Details]
a. Keep the battery clean, wipe off the spilled electrolyte, contaminated dirt and dust in time; keep the poles and terminal clamps clean and in good contact, and apply vaseline or butter to preven...[Details]
Measurement compatibility
It is very important to ensure the compatibility between the pressure sensor and its actual application. Before making a pressure sensor selection, the fo...[Details]
Fairchild's FAN6208 is a synchronous rectification (SR) controller for isolated LLC or LC resonant converters that can drive two individual SR MOSFETs emulating the behavior of rectifier diodes. FAN62...[Details]
Stepper motors have been widely used in automatic or semi-automatic equipment such as CNC machine tools, medical equipment, and instruments. The usual way to control stepper motors with computers i...[Details]
1 Introduction
Intelligent cars are the embodiment of the cross-integration of multiple disciplines such as automotive electronics, artificial intelligence, pattern recognition, automatic con...[Details]